pingPktStepSize
BRCM-PING-MGMT-MIB ·
.1.3.6.1.4.1.4413.2.2.2.1.1.5.6
Object
scalar
r/w
bytes Integer32
Specifies the number of bytes by which each subsequent ping packet
is incremented.
The step amount can be any number from 0 (which leaves the ping size
constant) up to (2^32 - 1). Note that after adding the step amount to
the current ping size, if this is greater than the end size, then the
current size will be wrapped around to the start size.
If you want to send ping packets of the same size every time, set
the start and end size to be equal, and the step amount to be 0.
To do a sweeping ping of every packet size, set start to 64, end to
1518, and step amount to 1. You can set step amount to -1 to sweep in
the other direction.
This object may be changed while a ping is in progress.
Context
- MIB
- BRCM-PING-MGMT-MIB
- OID
.1.3.6.1.4.1.4413.2.2.2.1.1.5.6- Type
- scalar
- Access
- readwrite
- Status
- current
- Units
- bytes
- Parent
- pingMgmt
- Siblings
- 17
Syntax
bytes Integer32
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| pingTargetAddressType The type of internet address used for pingTargetAddress.
This object may be changed while a ping is in progress. | scalar | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.4413.2.2.2.1.1.5.1 |
| pingIpStackNumber Allows the client to select the IP stack from which the pings will be
sent. Specifying 0 means that the pings will be sent from the same IP
stack on which this MIB is hosted.
… | scalar | Integer32 | .1.3.6.1.4.1.4413.2.2.2.1.1.5.10 |
| pingNow Starts or stops the pings, as well as indicating whether a ping is in
progress when read. If a ping is already in progress and this object
is set to true(1), then the ping will c… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4413.2.2.2.1.1.5.11 |
| pingPktsSent Indicates the number of packets sent since the ping was started. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4413.2.2.2.1.1.5.12 |
| pingRepliesReceived Indicates the number of replies received since the ping was started. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4413.2.2.2.1.1.5.13 |
| pingRepliesVerified Indicates the number of replies which were verified since the ping was
started. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4413.2.2.2.1.1.5.14 |
| pingOctetsSent Indicates the total number of octets that have been sent in pings
since the ping was started. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4413.2.2.2.1.1.5.15 |
| pingOctetsReceived Indicates the total number of octets that have been sent in pings
since the ping was started. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4413.2.2.2.1.1.5.16 |
| pingIcmpErrors Indicates the total ICMP errors which have been received since the
ping was started. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4413.2.2.2.1.1.5.17 |
| pingLastIcmpError Indicates value of the last ICMP error which was received, if any. If
there have been no errors, this object will have a value of 0. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4413.2.2.2.1.1.5.18 |
| pingTargetAddress Sets the internet address of the entity to be pinged. Note that if
an all-zeros value is specified for this object, then the ping will
be sent to the default gateway, if one exis… | scalar | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.4413.2.2.2.1.1.5.2 |
| pingNumPkts Allows the client to set the number of pings to be sent. This can be
set to any number between 1 and (2^32 - 1), or can be set to 'infinite'
by setting the value to 0.
… | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4413.2.2.2.1.1.5.3 |
| pingPktStartSize Allows the client to set the initial size of the ping packets that will
be sent. This size includes the LLC header, IP header, ICMP header,
and the CRC32 at the end. You must … | scalar | bytes Unsigned32 | .1.3.6.1.4.1.4413.2.2.2.1.1.5.4 |
| pingPktEndSize Allows the client to set the final size of the ping packets that will
be sent. This size includes the LLC header, IP header, ICMP header,
and the CRC32 at the end. You must sp… | scalar | bytes Unsigned32 | .1.3.6.1.4.1.4413.2.2.2.1.1.5.5 |
| pingInterval Allows the client to set the amount of time (in milliseconds) that the
device will sleep before sending a ping. Generally, this is the time
between when a ping reply is received … | scalar | milliseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4413.2.2.2.1.1.5.7 |
| pingTimeout Allows the client to set the amount of time (in milliseconds) that the
device should wait for a reply after sending a ping.
If set to any non-negative value, then the d… | scalar | milliseconds Integer32 | .1.3.6.1.4.1.4413.2.2.2.1.1.5.8 |
| pingVerifyReply Enables/disables verification of ping replies. If enabled, and if
waiting for replies is enabled, then if a reply is received, it will
verify that it matches the ping that was … | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4413.2.2.2.1.1.5.9 |