pingNow
BRCM-PING-MGMT-MIB ·
.1.3.6.1.4.1.4413.2.2.2.1.1.5.11
Object
Starts or stops the pings, as well as indicating whether a ping is in
progress when read. If a ping is already in progress and this object
is set to true(1), then the ping will continue but the ping statistics
will be reset.
This object may be changed while a ping is in progress.
Context
- MIB
- BRCM-PING-MGMT-MIB
- OID
.1.3.6.1.4.1.4413.2.2.2.1.1.5.11- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- pingMgmt
- Siblings
- 17
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| pingTargetAddressType The type of internet address used for pingTargetAddress.
This object may be changed while a ping is in progress. | scalar | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.4413.2.2.2.1.1.5.1 |
| pingIpStackNumber Allows the client to select the IP stack from which the pings will be
sent. Specifying 0 means that the pings will be sent from the same IP
stack on which this MIB is hosted.
… | scalar | Integer32 | .1.3.6.1.4.1.4413.2.2.2.1.1.5.10 |
| pingPktsSent Indicates the number of packets sent since the ping was started. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4413.2.2.2.1.1.5.12 |
| pingRepliesReceived Indicates the number of replies received since the ping was started. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4413.2.2.2.1.1.5.13 |
| pingRepliesVerified Indicates the number of replies which were verified since the ping was
started. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4413.2.2.2.1.1.5.14 |
| pingOctetsSent Indicates the total number of octets that have been sent in pings
since the ping was started. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4413.2.2.2.1.1.5.15 |
| pingOctetsReceived Indicates the total number of octets that have been sent in pings
since the ping was started. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4413.2.2.2.1.1.5.16 |
| pingIcmpErrors Indicates the total ICMP errors which have been received since the
ping was started. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4413.2.2.2.1.1.5.17 |
| pingLastIcmpError Indicates value of the last ICMP error which was received, if any. If
there have been no errors, this object will have a value of 0. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4413.2.2.2.1.1.5.18 |
| pingTargetAddress Sets the internet address of the entity to be pinged. Note that if
an all-zeros value is specified for this object, then the ping will
be sent to the default gateway, if one exis… | scalar | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.4413.2.2.2.1.1.5.2 |
| pingNumPkts Allows the client to set the number of pings to be sent. This can be
set to any number between 1 and (2^32 - 1), or can be set to 'infinite'
by setting the value to 0.
… | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4413.2.2.2.1.1.5.3 |
| pingPktStartSize Allows the client to set the initial size of the ping packets that will
be sent. This size includes the LLC header, IP header, ICMP header,
and the CRC32 at the end. You must … | scalar | bytes Unsigned32 | .1.3.6.1.4.1.4413.2.2.2.1.1.5.4 |
| pingPktEndSize Allows the client to set the final size of the ping packets that will
be sent. This size includes the LLC header, IP header, ICMP header,
and the CRC32 at the end. You must sp… | scalar | bytes Unsigned32 | .1.3.6.1.4.1.4413.2.2.2.1.1.5.5 |
| pingPktStepSize Specifies the number of bytes by which each subsequent ping packet
is incremented.
The step amount can be any number from 0 (which leaves the ping size
constant) up to … | scalar | bytes Integer32 | .1.3.6.1.4.1.4413.2.2.2.1.1.5.6 |
| pingInterval Allows the client to set the amount of time (in milliseconds) that the
device will sleep before sending a ping. Generally, this is the time
between when a ping reply is received … | scalar | milliseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4413.2.2.2.1.1.5.7 |
| pingTimeout Allows the client to set the amount of time (in milliseconds) that the
device should wait for a reply after sending a ping.
If set to any non-negative value, then the d… | scalar | milliseconds Integer32 | .1.3.6.1.4.1.4413.2.2.2.1.1.5.8 |
| pingVerifyReply Enables/disables verification of ping replies. If enabled, and if
waiting for replies is enabled, then if a reply is received, it will
verify that it matches the ping that was … | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4413.2.2.2.1.1.5.9 |