cmFactAnnex
BRCM-CM-FACTORY-MIB ·
.1.3.6.1.4.1.4413.2.99.1.1.2.2.1.13
Object
scalar
r/w
Enumeration
Specifies the annex mode which will be used. This setting affects downstream tuning parameters including frequency list and phy level operation.
Context
- MIB
- BRCM-CM-FACTORY-MIB
- OID
.1.3.6.1.4.1.4413.2.99.1.1.2.2.1.13- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- cmFactoryBase
- Siblings
- 13
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | annexB |
1 | annexA |
2 | annexJ |
3 | annexOther |
4 | annexC |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cmFactOperMode Reflects and controls the operational state of the device. If
set to docsis(1), the CM will operate in the usual DOCSIS fashion.
If set to diagnostic(2), the CM will not begin sc… | scalar | Enumeration | .1.3.6.1.4.1.4413.2.99.1.1.2.2.1.1 |
| cmFactHighOutputPAEnable Enables or disables the support of high-output power amp mode on the
CM. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4413.2.99.1.1.2.2.1.10 |
| cmFactChannelBondingEnable Enables or disables the support of channel bonding. Note that this
setting will only have any effect if the hardware and firmware
support channel bonding. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4413.2.99.1.1.2.2.1.11 |
| cmFactEnabledTuners Specifies the number of tuners which will be advertised to the CMTS
in the CM's modem capabilities message. By advertising fewer tuners
than the design actually supports, power c… | scalar | Integer32 | .1.3.6.1.4.1.4413.2.99.1.1.2.2.1.12 |
| cmFactExtendedUsTxPowerCapability Specifies the maximum extended upstream transmit power of which this
device is capable. A value of zero indicates that the device has no
extended upstream power capability. Th… | scalar | quarter dBmV Integer32 | .1.3.6.1.4.1.4413.2.99.1.1.2.2.1.14 |
| cmFactSwBcmVersion The Broadcom internal software version identifier of this image.
This is generally not the same as docsDevSwVersion. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4413.2.99.1.1.2.2.1.2 |
| cmFactSwDateTime The date and time that this image was built. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4413.2.99.1.1.2.2.1.3 |
| cmFactSwBuiltBy The user ID of the individual who built this image. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4413.2.99.1.1.2.2.1.4 |
| cmFactSwFeatures A list of features supported by this image. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4413.2.99.1.1.2.2.1.5 |
| cmFactAckCelEnable Enables or disables Broadcom's Patent Pending AckCel technology for
the CM Upstream interface. Changes to this value take effect the next
time the CM registers with a CMTS. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4413.2.99.1.1.2.2.1.6 |
| cmFactNonstdUpstreamEnable Enables or disables the support of non-standard upstream
configurations. If enabled, the s/w will accept and use UCDs that
contain proprietary non-standard modes of operation t… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4413.2.99.1.1.2.2.1.7 |
| cmFactPowerSaveModeEnable Enables or disables power save mode. With power save mode enabled,
various measures will be taken to reduce power consumption.
Power save mode is primarily useful for battery p… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4413.2.99.1.1.2.2.1.8 |
| cmFactOptimized3420FreqMapEnable Enables or disables the use of the optimized frequency map for devices
which use the 3420 tuner. Note that this object has no meaning if
the device uses a tuner other than the 34… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4413.2.99.1.1.2.2.1.9 |