bnLogMsgRemoteSyslogInetAddress
BN-LOG-MESSAGE-MIB ·
.1.3.6.1.4.1.45.1.6.16.1.1.16
Object
The IP address to which log messages are sent using the remote syslog facility.
Context
- MIB
- BN-LOG-MESSAGE-MIB
- OID
.1.3.6.1.4.1.45.1.6.16.1.1.16- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- bnLogMsgMIBObjects
- Siblings
- 24
Syntax
INET-ADDRESS-MIBInetAddress
- Source
- INET-ADDRESS-MIBInetAddress
- Base type
OctetString
Values & Constraints
Type Constraints
range: 0..255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| bnLogMsgBufferOperaton The decision to store or discard generated log
messages is determined by the value of this object.
Specifying on(1) causes log messages to be stored
in the log message buffer faci… | scalar | Enumeration | .1.3.6.1.4.1.45.1.6.16.1.1.1 |
| bnLogMsgBufferTable Locally held information about log messages. | table | - | .1.3.6.1.4.1.45.1.6.16.1.1.10 |
| bnLogMsgRemoteSyslogEnabled This object controls whether remote logging of
log messages using the remote syslog facility
is enabled. The value of this object may not
be true(2) if the value of the remote sy… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.45.1.6.16.1.1.11 |
| bnLogMsgRemoteSyslogAddress The IP address to which log messages are sent
using the remote syslog facility. If the value
of this object is 0.0.0.0, the refer to the values
of bnLogMsgRemoteSyslogInetAddress… | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.45.1.6.16.1.1.12 |
| bnLogMsgRemoteSyslogSaveTargets This object determines the type of log messages that
will be sent to a remote syslog server when they occur.
Messages are classified based on their type. Selecting
a type value ca… | scalar | Enumeration | .1.3.6.1.4.1.45.1.6.16.1.1.13 |
| bnLogMsgClearMessageBuffers Setting this objects causes messages currently saved in
the log message buffer facilities to be deleted. All
messages of types matching the specified bits will be
deleted. For e… | scalar | Bits | .1.3.6.1.4.1.45.1.6.16.1.1.14 |
| bnLogMsgRemoteSyslogInetAddressType The type of the IP address contained in the object
bnLogMsgRemoteSyslogInetAddress. Together, these two
objects specify the IP address to which log messages
are sent using the re… | scalar | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.45.1.6.16.1.1.15 |
| bnLogMsgRemoteSyslogSecondaryInetAddressType The type of the IP address contained in the object
bnLogMsgRemoteSyslogSecondaryInetAddress. Together, these two objects
specify a second IP address to which log messages are sen… | scalar | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.45.1.6.16.1.1.17 |
| bnLogMsgRemoteSyslogSecondaryInetAddress The IP address to which log messages are sent
using the remote syslog facility. | scalar | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.45.1.6.16.1.1.18 |
| bnLogMsgRemoteServerTable A table of remote logging server addresses. | table | - | .1.3.6.1.4.1.45.1.6.16.1.1.19 |
| bnLogMsgBufferMaxSize This object determines the overall size of the log
message buffer facilities. Changing the value of this
object causes all messages currently being stored in
the buffer to be lost… | scalar | Enumeration | .1.3.6.1.4.1.45.1.6.16.1.1.2 |
| bnLogMsgRemoteSyslogFacility The facility against which remote logging is done. | scalar | Enumeration | .1.3.6.1.4.1.45.1.6.16.1.1.20 |
| bnLogMsgRemoteSyslogStandardSaveTargets This object determines the type of log messages that
will be sent to a remote syslog server when they occur.
Messages are classified based on their type. Selecting
a type value ca… | scalar | Enumeration | .1.3.6.1.4.1.45.1.6.16.1.1.21 |
| bnLogMsgRemoteSyslogPrimaryTcpPort Specifies the TCP port to use with the primary address
for sending syslog messages to the host. | scalar | Integer32 | .1.3.6.1.4.1.45.1.6.16.1.1.22 |
| bnLogMsgRemoteSyslogSecondaryTcpPort Specifies the TCP port to use with the secondary address
for sending syslog messages to the host. | scalar | Integer32 | .1.3.6.1.4.1.45.1.6.16.1.1.23 |
| bnLogMsgRemoteSyslogPrimaryConnectionType Specifies the primary connection type (TCP/UDP) to be used
to send syslog messages to the host. | scalar | Enumeration | .1.3.6.1.4.1.45.1.6.16.1.1.24 |
| bnLogMsgRemoteSyslogSecondaryConnectionType Specifies the secondary connection type (TCP/UDP) to be used
to send syslog messages to the host. | scalar | Enumeration | .1.3.6.1.4.1.45.1.6.16.1.1.25 |
| bnLogMsgBufferCurSize The current number of log messages in the volatile
portion of the system log message facility. Messages
that are classified as volatile are lost upon system
reinitialization. | scalar | Integer32 | .1.3.6.1.4.1.45.1.6.16.1.1.3 |
| bnLogMsgBufferFullAction The amount of buffer space allocated for log messages,
as determined by the object bnLogMsgBufferMaxSize, is
finite and thus only a limited amount of log messages
may be saved on … | scalar | Enumeration | .1.3.6.1.4.1.45.1.6.16.1.1.4 |
| bnLogMsgBufferSaveTargets This object determines the type of log messages that
will be saved in the log message buffer facilities.
Messages are classified based on their type
Selectin… | scalar | Enumeration | .1.3.6.1.4.1.45.1.6.16.1.1.5 |
| bnLogMsgBufferClearTargets deprecated This object determines the type of log messages that
will be deleted from the log message buffer facilities
when the action object bnLogMsgBufferClearMsgs is set.
Messages are cla… | scalar | Enumeration | .1.3.6.1.4.1.45.1.6.16.1.1.6 |
| bnLogMsgBufferClearMsgs deprecated Setting this object to clearMsgs(1) causes messages
currently saved in the log message buffer facilities
to be deleted. The type of entries to be deleted is
determined by the bnLo… | scalar | Enumeration | .1.3.6.1.4.1.45.1.6.16.1.1.7 |
| bnLogMsgBufferNonVolCurSize The current number of log messages that are present
in the non-volatile portion of the system log message
facility. Messages that are classified as non-
volatile are saved across … | scalar | Integer32 | .1.3.6.1.4.1.45.1.6.16.1.1.8 |
| bnLogMsgBufferNonVolSaveTargets This object determines the type of log messages that
will be saved to non-volatile storage when they occur.
Messages are classified based on their type. Selecting
a type value cau… | scalar | Enumeration | .1.3.6.1.4.1.45.1.6.16.1.1.9 |