vlanEntryState
BLADE-MIB ·
.1.3.6.1.4.1.2.3.51.2.4.9.1.20.20.1.5
Object
column
mandatory
r/w
Enumeration
This object indicates whether this VLAN entry is enabled
or disabled and allows the user to disable, enable or
restart this entry except for the exceptions noted below.
The entry with a vlanEntryIndex value of 1 (default VLAN
entry) will always have this object set to enable(1) and
cannot be set to any other value. Other table entries do
not have this restriction.
Some other objects in this table may not take effect after
a change until either this object is: set to enable(1) if
this object currently has the value of disable(0), or set
to restart(2) if this object currently has the value of
enable(1). The other objects in this table that require
this object be set to enable(1) or restart(2) after a
change are noted in the description for those objects.
Syntax
Enumeration
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| vlanEntryIndex mandatory Index for VLAN entry. If vlanEntryIndex is equal to 1,
it is the Default VLAN entry and cannot be deleted. | column | Integer32 | .1.3.6.1.4.1.2.3.51.2.4.9.1.20.20.1.1 |
| vlanEntryVlanDefault mandatory This object specifies which vlanTable entry is the
'default entry'. By default, the entry with the
vlanEntryIndex value of 1 will have this object set to
true(1).
… | column | Enumeration | .1.3.6.1.4.1.2.3.51.2.4.9.1.20.20.1.10 |
| vlanEntryVlanId mandatory Valid VLAN ID. Allowed values are 1..4094. If the entry
is not valid, this object will have the value of 0.
If this entry has the vlanEntryIndex value of 1 (defau… | column | Integer32 | .1.3.6.1.4.1.2.3.51.2.4.9.1.20.20.1.2 |
| vlanEntryName mandatory This object allows the user to configure a text string
name for this VLAN entry. This entry name is only used
as a label for this entry. | column | OctetString | .1.3.6.1.4.1.2.3.51.2.4.9.1.20.20.1.3 |
| vlanEntryIPv4StaticAddress mandatory This object sets the IP address for this VLAN entry.
The entry with the vlanEntryIndex value of 1 (default VLAN
entry) will have this object set to the IP address o… | column | RFC1155-SMIIpAddress | .1.3.6.1.4.1.2.3.51.2.4.9.1.20.20.1.31 |
| vlanEntryIPv4StaticGateway mandatory This object sets the IP address for the IP gateway
for this VLAN entry.
The entry with the vlanEntryIndex value of 1 (default VLAN
entry) will have this object set … | column | RFC1155-SMIIpAddress | .1.3.6.1.4.1.2.3.51.2.4.9.1.20.20.1.32 |
| vlanEntryIPv4StaticMask mandatory This object sets the subnet mask for this VLAN entry.
The entry with the vlanEntryIndex value of 1 (default VLAN
entry) will have this object set to the subnet mask… | column | RFC1155-SMIIpAddress | .1.3.6.1.4.1.2.3.51.2.4.9.1.20.20.1.33 |
| vlanEntryStatus mandatory This object manages the creation and deletion of this
entry.
The steps recommended to add a new VLAN entry are:
1. Create a new entry in this table
vlanEntryStatus = cr… | column | EntryStatus | .1.3.6.1.4.1.2.3.51.2.4.9.1.20.20.1.4 |
| vlanEntryIPv4SubnetRoute1 mandatory This object sets the IP address of the subnet route 1 for
this VLAN entry.
The entry with the vlanEntryIndex value of 1 (default VLAN
entry) will always have this o… | column | RFC1155-SMIIpAddress | .1.3.6.1.4.1.2.3.51.2.4.9.1.20.20.1.51 |
| vlanEntryIPv4SubnetRouteMask1 mandatory This object sets the subnet route mask 1 for this VLAN
entry.
The entry with the vlanEntryIndex value of 1 (default VLAN
entry) will always have this object set to … | column | RFC1155-SMIIpAddress | .1.3.6.1.4.1.2.3.51.2.4.9.1.20.20.1.52 |
| vlanEntryIPv4SubnetRoute2 mandatory This object sets the IP address of the subnet route 2 for
this VLAN entry.
The entry with the vlanEntryIndex value of 1 (default VLAN
entry) will always have this o… | column | RFC1155-SMIIpAddress | .1.3.6.1.4.1.2.3.51.2.4.9.1.20.20.1.53 |
| vlanEntryIPv4SubnetRouteMask2 mandatory This object sets the subnet route mask 2 for this VLAN
entry.
The entry with the vlanEntryIndex value of 1 (default VLAN
entry) will always have this object set to … | column | RFC1155-SMIIpAddress | .1.3.6.1.4.1.2.3.51.2.4.9.1.20.20.1.54 |
| vlanEntryIPv4SubnetRoute3 mandatory This object sets the IP address of the subnet route 3 for
this VLAN entry.
The entry with the vlanEntryIndex value of 1 (default VLAN
entry) will always have this o… | column | RFC1155-SMIIpAddress | .1.3.6.1.4.1.2.3.51.2.4.9.1.20.20.1.55 |
| vlanEntryIPv4SubnetRouteMask3 mandatory This object sets the subnet route mask 3 for this VLAN
entry.
The entry with the vlanEntryIndex value of 1 (default VLAN
entry) will always have this object set to … | column | RFC1155-SMIIpAddress | .1.3.6.1.4.1.2.3.51.2.4.9.1.20.20.1.56 |
| vlanEntrySOLAccess mandatory This object allows the user to set whether the VLAN
for this entry will have access to the Serial Over
LAN (SOL) interface.
Only one VLAN entry may have this object… | column | Enumeration | .1.3.6.1.4.1.2.3.51.2.4.9.1.20.20.1.6 |
| vlanEntrycKVMAccess mandatory This object allows the user to set whether the VLAN
for this entry will have access to the installed cards
for concurrent keyboard, video, and mouse (cKVM).
Only on… | column | Enumeration | .1.3.6.1.4.1.2.3.51.2.4.9.1.20.20.1.7 |
| vlanEntryTagging mandatory This object allows the user to set whether VLAN tagging
is enabled for this VLAN entry.
This object is only configurable for the entry with the
vlanEntryIndex value… | column | Enumeration | .1.3.6.1.4.1.2.3.51.2.4.9.1.20.20.1.8 |
| vlanEntryIOModuleAccess mandatory This read-only object indicates whether the VLAN
for this entry will have access to the IO Modules.
Only the VLAN entry with the vlanEntryIndex value of 1
will repo… | column | Enumeration | .1.3.6.1.4.1.2.3.51.2.4.9.1.20.20.1.9 |