standbyExtEthernetInterfaceDataRate
BLADE-MIB ·
.1.3.6.1.4.1.2.3.51.2.4.9.1.3.5
Object
scalar
mandatory
r/w
Enumeration
Specifies the data transfer rate to be used over the ethernet
interface: 10Mb, 100Mb, 1G Auto or Auto.
NOTE: This MIB object is only applicable to systems with a standby MM.
Note that not all AMM hardware supports the 1G Auto speed. If it does not
and a SET of this value is attempted, it will be rejected with a
badValue return code.
When a user selects the 1G Auto setting, the duplex setting will be forced to
fullDuplex.
Context
- MIB
- BLADE-MIB
- OID
.1.3.6.1.4.1.2.3.51.2.4.9.1.3.5- Type
- scalar
- Access
- readwrite
- Status
- mandatory
- Parent
- standbyExtEthernetInterface
- Siblings
- 12
Syntax
Enumeration
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| standbyExtEthernetInterfaceType mandatory The type of interface. Indicates 'Ethernet-1'.
NOTE: This MIB object is only applicable to systems with a standby MM. | scalar | OctetString | .1.3.6.1.4.1.2.3.51.2.4.9.1.3.1 |
| standbyExtEthernetInterfaceBIA mandatory Specifies the burned-in MAC (BIA) address.
NOTE: This MIB object is only applicable to systems with a standby MM. | scalar | OctetString | .1.3.6.1.4.1.2.3.51.2.4.9.1.3.10 |
| standbyExtEthernetInterfaceMTU mandatory Contains the Maximum Transmission Unit (MTU) for the ethernet
interface.
NOTE: This MIB object is only applicable to systems with a standby MM. | scalar | Integer32 | .1.3.6.1.4.1.2.3.51.2.4.9.1.3.13 |
| standbyExtEthernetInterfaceSubnetMask mandatory Contains the subnet mask for the ethernet interface.
NOTE: This MIB object is only applicable to systems with a standby MM. | scalar | RFC1155-SMIIpAddress | .1.3.6.1.4.1.2.3.51.2.4.9.1.3.14 |
| advancedFailover mandatory User can enable advanced failover.
off : no standby network interface
ipswap: Standby network interface, swap IPs during failover
ipnoswap: Standby network interface, no swap IPs … | scalar | Enumeration | .1.3.6.1.4.1.2.3.51.2.4.9.1.3.15 |
| standbyDhcpEthernetInterface | node | - | .1.3.6.1.4.1.2.3.51.2.4.9.1.3.16 |
| standbyExtEthernetInterfaceHostName mandatory Contains the 64 byte null terminated DNS host name for this
interface.
NOTE: This MIB object is only applicable to systems with a standby MM. | scalar | OctetString | .1.3.6.1.4.1.2.3.51.2.4.9.1.3.3 |
| standbyExtEthernetInterfaceIPAddress mandatory Contains the IP address for the ethernet interface.
NOTE: This MIB object is only applicable to systems with a standby MM. | scalar | RFC1155-SMIIpAddress | .1.3.6.1.4.1.2.3.51.2.4.9.1.3.4 |
| standbyExtEthernetInterfaceDuplexSetting mandatory Specifies the duplex settings for the data transfer rate to be used over
the ethernet interface: Half, Full, or Auto.
NOTE: This MIB object is only applicable to syste… | scalar | Enumeration | .1.3.6.1.4.1.2.3.51.2.4.9.1.3.6 |
| standbyExtEthernetInterfaceLAA mandatory Specifies the locally administered MAC address. The locally administered
address must be a hexadecimal value between 000000000000 - FFFFFFFFFFFF.
This value must be in the form X… | scalar | OctetString | .1.3.6.1.4.1.2.3.51.2.4.9.1.3.7 |
| standbyExtEthernetInterfaceDhcpEnabled mandatory Disable or enable DHCP on this interface.
NOTE: This MIB object is only applicable to systems with a standby MM. | scalar | Enumeration | .1.3.6.1.4.1.2.3.51.2.4.9.1.3.8 |
| standbyExtEthernetInterfaceGatewayIPAddress mandatory Contains the IP address of the gateway/router for the ethernet
interface.
NOTE: This MIB object is only applicable to systems with a standby MM. | scalar | RFC1155-SMIIpAddress | .1.3.6.1.4.1.2.3.51.2.4.9.1.3.9 |