smTwoPortCfgSpeedStatus
BLADE-MIB ·
.1.3.6.1.4.1.2.3.51.2.22.3.2.2.2.1.1.7
Object
column
mandatory
OctetString
Current port speed of Switch Module 2.
Context
- MIB
- BLADE-MIB
- OID
.1.3.6.1.4.1.2.3.51.2.22.3.2.2.2.1.1.7- Type
- column
- Access
- readonly
- Status
- mandatory
- Parent
- smTwoPortCfgEntry
- Table
- smTwoPortCfgTable
- Siblings
- 15
Syntax
OctetString
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| smTwoPortCfgIndex mandatory Switch Module 2 port sequence index. | column | Integer32 | .1.3.6.1.4.1.2.3.51.2.22.3.2.2.2.1.1.1 |
| smTwoPortCfgProtocol mandatory Port protocol of Switch Module 2. | column | Enumeration | .1.3.6.1.4.1.2.3.51.2.22.3.2.2.2.1.1.10 |
| smTwoPortCfgWidth mandatory The width of the port in terms of how many combined cables are present for Switch Module 2.
A value of 0 indicates this field is not applicable to the switch ports.
This data is a… | column | Integer32 | .1.3.6.1.4.1.2.3.51.2.22.3.2.2.2.1.1.11 |
| smTwoPortCfgCableLength mandatory The length (in meters) of the cable supported by this port for Switch Module 2.
A value of 0 indicates this field is not applicable to the switch ports. | column | Integer32 | .1.3.6.1.4.1.2.3.51.2.22.3.2.2.2.1.1.12 |
| smTwoPortCfgCableType mandatory External cable type for this port, for example, active copper or passive fiber. | column | OctetString | .1.3.6.1.4.1.2.3.51.2.22.3.2.2.2.1.1.13 |
| smTwoPortCfgVendorName mandatory The cable manufacturer. | column | OctetString | .1.3.6.1.4.1.2.3.51.2.22.3.2.2.2.1.1.14 |
| smTwoPortCfgCompatibility mandatory Compatibility of the external cable that is plugged into the port. | column | Enumeration | .1.3.6.1.4.1.2.3.51.2.22.3.2.2.2.1.1.15 |
| smTwoPortCfgDataRate mandatory Data rate supported for this port. | column | Enumeration | .1.3.6.1.4.1.2.3.51.2.22.3.2.2.2.1.1.16 |
| smTwoPortCfgLabel mandatory Switch Module 2 port label | column | OctetString | .1.3.6.1.4.1.2.3.51.2.22.3.2.2.2.1.1.2 |
| smTwoPortCfgType mandatory Switch Module 2 port type:
External port: This port is connected to external device and is for data traffic.
External management port: This port is solely for external management … | column | Enumeration | .1.3.6.1.4.1.2.3.51.2.22.3.2.2.2.1.1.3 |
| smTwoPortCfgLinkSetting mandatory Current port link setting for Switch Module 2. | column | Enumeration | .1.3.6.1.4.1.2.3.51.2.22.3.2.2.2.1.1.4 |
| smTwoPortCfgLinkState mandatory Current port link state of Switch Module 2. | column | Enumeration | .1.3.6.1.4.1.2.3.51.2.22.3.2.2.2.1.1.5 |
| smTwoPortCfgSpeedSetting mandatory Set the port speed using the data rate and duplex value. For examples:
100mf: 100Mbps in Half Duplex;
10gf: 10 Gbps in Full Duplex;
auto: The working speed of the physical port ca… | column | OctetString | .1.3.6.1.4.1.2.3.51.2.22.3.2.2.2.1.1.6 |
| smTwoPortCfgAvailSpeeds mandatory Available speed setting per port for Switch Module 2.
If there is more than one setting, the speeds are separated by a comma and then a space. | column | OctetString | .1.3.6.1.4.1.2.3.51.2.22.3.2.2.2.1.1.8 |
| smTwoPortCfgMedia mandatory Port media type of Switch Module 2. | column | Enumeration | .1.3.6.1.4.1.2.3.51.2.22.3.2.2.2.1.1.9 |