blowers
BLADE-MIB ·
.1.3.6.1.4.1.2.3.51.2.2.3
Object
node
No description available.
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| temperature | node | - | .1.3.6.1.4.1.2.3.51.2.2.1 |
| fuelGauge | node | - | .1.3.6.1.4.1.2.3.51.2.2.10 |
| frontbezel | node | - | .1.3.6.1.4.1.2.3.51.2.2.12 |
| users | node | - | .1.3.6.1.4.1.2.3.51.2.2.17 |
| voltage | node | - | .1.3.6.1.4.1.2.3.51.2.2.2 |
| monitorThresholds | node | - | .1.3.6.1.4.1.2.3.51.2.2.20 |
| vpdInformation | node | - | .1.3.6.1.4.1.2.3.51.2.2.21 |
| airFilter | node | - | .1.3.6.1.4.1.2.3.51.2.2.22 |
| componentInformation | node | - | .1.3.6.1.4.1.2.3.51.2.2.23 |
| powerModuleHealth | node | - | .1.3.6.1.4.1.2.3.51.2.2.4 |
| spStatus | node | - | .1.3.6.1.4.1.2.3.51.2.2.5 |
| fanPack | node | - | .1.3.6.1.4.1.2.3.51.2.2.6 |
| systemHealth | node | - | .1.3.6.1.4.1.2.3.51.2.2.7 |
| leds | node | - | .1.3.6.1.4.1.2.3.51.2.2.8 |
| telcoSystemHealth | node | - | .1.3.6.1.4.1.2.3.51.2.2.9 |
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| blower1speed mandatory Blower 1 speed expressed in percent(%) of maximum RPM.
An octet string expressed as 'ddd% of maximum' where:
d is a decimal digit or blank space for a leading zero.
If the blower … | scalar | OctetString | .1.3.6.1.4.1.2.3.51.2.2.3.1 |
| blower1State mandatory The health state for blower 1.
NOTE: Blowers are also referred to as Chassis Cooling Devices. | scalar | Enumeration | .1.3.6.1.4.1.2.3.51.2.2.3.10 |
| blower2State mandatory The health state for blower 2.
NOTE: Blowers are also referred to as Chassis Cooling Devices. | scalar | Enumeration | .1.3.6.1.4.1.2.3.51.2.2.3.11 |
| blower3State mandatory The health state for blower 3.
NOTE: This MIB object is for BladeCenter T and BladeCenter S only.
NOTE: Blowers are also referred to as Chassis Cooling Devices. | scalar | Enumeration | .1.3.6.1.4.1.2.3.51.2.2.3.12 |
| blower4State mandatory The health state for blower 4.
NOTE: This MIB object is for BladeCenter T and BladeCenter S only.
NOTE: Blowers are also referred to as Chassis Cooling Devices. | scalar | Enumeration | .1.3.6.1.4.1.2.3.51.2.2.3.13 |
| blower2speed mandatory Blower 2 speed expressed in percent(%) of maximum RPM.
An octet string expressed as 'ddd% of maximum' where:
d is a decimal digit or blank space for a leading zero.
If the blower … | scalar | OctetString | .1.3.6.1.4.1.2.3.51.2.2.3.2 |
| blower1speedRPM mandatory Blower 1 speed expressed in RPM.
If the blower is determined not to be running or
the blower speed cannot be determined, the string will
indicate 'Offline'.
The string 'Not Readab… | scalar | OctetString | .1.3.6.1.4.1.2.3.51.2.2.3.20 |
| blower2speedRPM mandatory Blower 2 speed expressed in RPM.
If the blower is determined not to be running or
the blower speed cannot be determined, the string will
indicate 'Offline'.
The string 'Not Readab… | scalar | OctetString | .1.3.6.1.4.1.2.3.51.2.2.3.21 |
| blower3speedRPM mandatory Blower 3 speed expressed in RPM.
If the blower is determined not to be running or
the blower speed cannot be determined, the string will
indicate 'Offline'.
The string 'Not Readab… | scalar | OctetString | .1.3.6.1.4.1.2.3.51.2.2.3.22 |
| blower4speedRPM mandatory Blower 4 speed expressed in RPM.
If the blower is determined not to be running or
the blower speed cannot be determined, the string will
indicate 'Offline'.
The string 'Not Readab… | scalar | OctetString | .1.3.6.1.4.1.2.3.51.2.2.3.23 |
| blower3speed mandatory Blower 3 speed expressed in percent(%) of maximum RPM.
An octet string expressed as 'ddd% of maximum' where:
d is a decimal digit or blank space for a leading zero.
If the blower … | scalar | OctetString | .1.3.6.1.4.1.2.3.51.2.2.3.3 |
| blower1ControllerState mandatory The health state for the controller for blower 1.
NOTE: This MIB object is for AMM installed in BladeCenter H, BladeCenter HT and BladeCenter S only.
NOTE: Blowers are … | scalar | Enumeration | .1.3.6.1.4.1.2.3.51.2.2.3.30 |
| blower2ControllerState mandatory The health state for the controller for blower 2.
NOTE: This MIB object is for AMM installed in BladeCenter H, BladeCenter HT and BladeCenter S only.
NOTE: Blowers are … | scalar | Enumeration | .1.3.6.1.4.1.2.3.51.2.2.3.31 |
| blower3ControllerState mandatory The health state for the controller for blower 3.
NOTE: This MIB object is for AMM installed in BladeCenter HT and BladeCenter S only.
NOTE: Blowers are also referred t… | scalar | Enumeration | .1.3.6.1.4.1.2.3.51.2.2.3.32 |
| blower4ControllerState mandatory The health state for the controller for blower 4.
NOTE: This MIB object is for AMM installed in BladeCenter HT and BladeCenter S only.
NOTE: Blowers are also referred t… | scalar | Enumeration | .1.3.6.1.4.1.2.3.51.2.2.3.33 |
| blower4speed mandatory Blower 4 speed expressed in percent(%) of maximum RPM.
An octet string expressed as 'ddd% of maximum' where:
d is a decimal digit or blank space for a leading zero.
If the blower … | scalar | OctetString | .1.3.6.1.4.1.2.3.51.2.2.3.4 |
| blower1ExhaustTemp mandatory The exhaust temperature in degrees Celsius for blower 1.
NOTE: This MIB object is for BCS only.
NOTE: Blowers are also referred to as Chassis Cooling Devices. | scalar | OctetString | .1.3.6.1.4.1.2.3.51.2.2.3.40 |
| blower2ExhaustTemp mandatory The exhaust temperature in degrees Celsius for blower 2.
NOTE: This MIB object is for BCS only.
NOTE: Blowers are also referred to as Chassis Cooling Devices. | scalar | OctetString | .1.3.6.1.4.1.2.3.51.2.2.3.41 |
| blower3ExhaustTemp mandatory The exhaust temperature in degrees Celsius for blower 3.
NOTE: This MIB object is for BCS only.
NOTE: Blowers are also referred to as Chassis Cooling Devices. | scalar | OctetString | .1.3.6.1.4.1.2.3.51.2.2.3.42 |
| blower4ExhaustTemp mandatory The exhaust temperature in degrees Celsius for blower 4.
NOTE: This MIB object is for BCS only.
NOTE: Blowers are also referred to as Chassis Cooling Devices. | scalar | OctetString | .1.3.6.1.4.1.2.3.51.2.2.3.43 |