bladeSensor3Volt
BLADE-MIB ·
.1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.17
Object
column
mandatory
OctetString
Voltage reading for an IPMI blade expressed in Volts(V).
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal digit or blank space for a leading zero.
The string 'Not Readable!' indicates that the given monitor
is not supported on this system.
The string 'No Voltage' indicates that the given monitor
does not exist on this system or is powered off.
Context
- MIB
- BLADE-MIB
- OID
.1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.17- Type
- column
- Access
- readonly
- Status
- mandatory
- Parent
- bladeVoltagesEntry
- Table
- bladeVoltagesTable
- Siblings
- 42
Syntax
OctetString
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| voltageIndex mandatory Blade voltages table index. | column | Integer32 | .1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.1 |
| bladePlus2pt5Volt mandatory +2.5 Volt power supply voltage reading for the blade
expressed in Volts(V). An octet string expressed as
'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive… | column | OctetString | .1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.10 |
| bladePlus1pt5Volt mandatory +1.5 Volt power supply voltage reading for the blade
expressed in Volts(V). An octet string expressed as
'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive… | column | OctetString | .1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.11 |
| bladePlus1pt25Volt mandatory +1.25 Volt power supply voltage reading for the blade
expressed in Volts(V). An octet string expressed as
'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positiv… | column | OctetString | .1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.12 |
| bladeVRM1Volt mandatory VRM 1 voltage reading for the blade expressed in Volts(V).
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal d… | column | OctetString | .1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.13 |
| bladeSensorVoltCapability mandatory Indicates whether the server blade is IPMI capable or not. | column | Enumeration | .1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.14 |
| bladeSensor1Volt mandatory Voltage reading for an IPMI blade expressed in Volts(V).
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal dig… | column | OctetString | .1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.15 |
| bladeSensor2Volt mandatory Voltage reading for an IPMI blade expressed in Volts(V).
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal dig… | column | OctetString | .1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.16 |
| bladeSensor4Volt mandatory Voltage reading for an IPMI blade expressed in Volts(V).
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal dig… | column | OctetString | .1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.18 |
| bladeSensor5Volt mandatory Voltage reading for an IPMI blade expressed in Volts(V).
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal dig… | column | OctetString | .1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.19 |
| voltageBladeId mandatory The numeric blade ID. | column | Enumeration | .1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.2 |
| bladeSensor6Volt mandatory Voltage reading for an IPMI blade expressed in Volts(V).
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal dig… | column | OctetString | .1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.20 |
| bladeSensor7Volt mandatory Voltage reading for an IPMI blade expressed in Volts(V).
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal dig… | column | OctetString | .1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.21 |
| bladeSensor8Volt mandatory Voltage reading for an IPMI blade expressed in Volts(V).
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal dig… | column | OctetString | .1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.22 |
| bladeSensor9Volt mandatory Voltage reading for an IPMI blade expressed in Volts(V).
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal dig… | column | OctetString | .1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.23 |
| bladeSensor10Volt mandatory Voltage reading for an IPMI blade expressed in Volts(V).
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal dig… | column | OctetString | .1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.24 |
| bladeSensor11Volt mandatory Voltage reading for an IPMI blade expressed in Volts(V).
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal dig… | column | OctetString | .1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.25 |
| bladeSensor12Volt mandatory Voltage reading for an IPMI blade expressed in Volts(V).
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal dig… | column | OctetString | .1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.26 |
| bladeSensor13Volt mandatory Voltage reading for an IPMI blade expressed in Volts(V).
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal dig… | column | OctetString | .1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.27 |
| bladeSensor14Volt mandatory Voltage reading for an IPMI blade expressed in Volts(V).
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal dig… | column | OctetString | .1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.28 |
| bladeSensor15Volt mandatory Voltage reading for an IPMI blade expressed in Volts(V).
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal dig… | column | OctetString | .1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.29 |
| voltageBladeExists mandatory Indicates whether the server blade specified exists or not. | column | Enumeration | .1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.3 |
| bladeSensor16Volt mandatory Voltage reading for an IPMI blade expressed in Volts(V).
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal dig… | column | OctetString | .1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.30 |
| bladeSensor17Volt mandatory Voltage reading for an IPMI blade expressed in Volts(V).
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal dig… | column | OctetString | .1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.31 |
| bladeSensor18Volt mandatory Voltage reading for an IPMI blade expressed in Volts(V).
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal dig… | column | OctetString | .1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.32 |
| bladeSensor19Volt mandatory Voltage reading for an IPMI blade expressed in Volts(V).
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal dig… | column | OctetString | .1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.33 |
| bladeSensor20Volt mandatory Voltage reading for an IPMI blade expressed in Volts(V).
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal dig… | column | OctetString | .1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.34 |
| bladeSensor21Volt mandatory Voltage reading for an IPMI blade expressed in Volts(V).
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal dig… | column | OctetString | .1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.35 |
| bladeSensor22Volt mandatory Voltage reading for an IPMI blade expressed in Volts(V).
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal dig… | column | OctetString | .1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.36 |
| bladeSensor23Volt mandatory Voltage reading for an IPMI blade expressed in Volts(V).
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal dig… | column | OctetString | .1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.37 |
| bladeSensor24Volt mandatory Voltage reading for an IPMI blade expressed in Volts(V).
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal dig… | column | OctetString | .1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.38 |
| bladeSensor25Volt mandatory Voltage reading for an IPMI blade expressed in Volts(V).
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal dig… | column | OctetString | .1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.39 |
| voltageBladePowerState mandatory Indicates the power state of the blade specified. | column | Enumeration | .1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.4 |
| bladeSensor26Volt mandatory Voltage reading for an IPMI blade expressed in Volts(V).
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal dig… | column | OctetString | .1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.40 |
| bladeSensor27Volt mandatory Voltage reading for an IPMI blade expressed in Volts(V).
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal dig… | column | OctetString | .1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.41 |
| bladeSensor28Volt mandatory Voltage reading for an IPMI blade expressed in Volts(V).
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal dig… | column | OctetString | .1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.42 |
| bladeSensor29Volt mandatory Voltage reading for an IPMI blade expressed in Volts(V).
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal dig… | column | OctetString | .1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.43 |
| bladeSensor30Volt mandatory Voltage reading for an IPMI blade expressed in Volts(V).
An octet string expressed as 'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
d is a decimal dig… | column | OctetString | .1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.44 |
| voltageBladeName mandatory The name of the blade as a null terminated string. | column | OctetString | .1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.5 |
| bladePlus5Volt mandatory +5 Volt power supply voltage reading for the blade
expressed in Volts(V). An octet string expressed as
'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)
… | column | OctetString | .1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.6 |
| bladePlus3pt3Volt mandatory +3.3 Volt power supply voltage reading for the blade
expressed in Volts(V). An octet string expressed as
'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive… | column | OctetString | .1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.7 |
| bladePlus12Volt mandatory +12 Volt power supply voltage reading for the blade
expressed in Volts(V). An octet string expressed as
'sdd.dd Volts' where:
s is the sign ('-' for negative or '+' for positive)… | column | OctetString | .1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.8 |