bladeDetailsDynamicPowerFavorPerformanceOverPower
BLADE-MIB ·
.1.3.6.1.4.1.2.3.51.2.2.10.4.1.1.1.8
Object
column
mandatory
r/w
Enumeration
When enabled, Dynamic Power Favor Performance Over Power supports a max performance mode that pushes the
system past its nominal CPU frequency when CPU and memory utilization implies it would help and the
system allows it. Dynamic Power Performance Over Power can be active on the blade only after Dynamic
Power Saver is enabled. This feature is not available on all blade types. Please refer to the
blade documentation for details. If a blade does not support the dynamic power saver, this object
will return notApplicable (255).
Under certain rare circumstances, the enabling of the dynamic power favor performance over power
may not complete successfully due to interactions with other blade functions, such as BIOS.
Therefore, it is highly recommended that the user perform a GET of this object after performing a SET,
in order to verify the completion of the intended operation.
Context
- MIB
- BLADE-MIB
- OID
.1.3.6.1.4.1.2.3.51.2.2.10.4.1.1.1.8- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- bladeDetailsEntry
- Table
- bladeDetailsTable
- Siblings
- 8
Syntax
Enumeration
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| bladeDetailsIndex mandatory Blade Module Details Table Index. | column | Integer32 | .1.3.6.1.4.1.2.3.51.2.2.10.4.1.1.1.1 |
| bladeDetailsId mandatory Blade Module Details Table Blade Id. | column | Enumeration | .1.3.6.1.4.1.2.3.51.2.2.10.4.1.1.1.2 |
| bladeDetailsMaxPowerConfig mandatory Blade Module Details Table Maximum Power Configuration.
Allow the user to set the maximum power that can be used by the blade. This
function is also known as power capping.
… | column | Integer32 | .1.3.6.1.4.1.2.3.51.2.2.10.4.1.1.1.3 |
| bladeDetailsEffectiveClockRate mandatory Blade Module Details Table Effective CPU Clock Rate applies to DPM
blades only. It displays processor's effective clock rate based
on sample interval. Note that some blades do n… | column | OctetString | .1.3.6.1.4.1.2.3.51.2.2.10.4.1.1.1.4 |
| bladeDetailsMaximumClockRate mandatory Blade Module Details Table Maximum CPU Clock Rate applies to DPM
blades only. It displays processor's maximum clock rate based
on sample interval. Note that some blades do not m… | column | OctetString | .1.3.6.1.4.1.2.3.51.2.2.10.4.1.1.1.5 |
| bladeDetailsPowerSaverMode mandatory When enabled, the static low power saver mode allows the blade to selectively
alter its operating voltage and frequency to reduce power consumption.
This feature is not available … | column | Enumeration | .1.3.6.1.4.1.2.3.51.2.2.10.4.1.1.1.6 |
| bladeDetailsDynamicPowerSaver mandatory When enabled, Dynamic Power Saver allows the voltage and frequency of the CPUs on the blade
to be controlled based on how busy the CPU is. This feature is not available on all bl… | column | Enumeration | .1.3.6.1.4.1.2.3.51.2.2.10.4.1.1.1.7 |
| bladeDetailsPowerControl mandatory This object is used to get or set the power control setting on a blade.
If dynamic power mgmt is not supported on a blade, notApplicable(255) will be returned.
… | column | Enumeration | .1.3.6.1.4.1.2.3.51.2.2.10.4.1.1.1.9 |