qosPolicyType
BINTEC-QOS-MIB ·
.0.3.1.2
Object
column
r/w
Enumeration
This objects defines in conjunction with ipQoSClassId and qosPolicyClassId the related type of packet classes for this QoS policy, possible values: class-based(1) = policy for non-high-priority packets high-priority(2) = policy for high-priority packets default(3) = policy for packets not matching otherwise.
Context
- MIB
- BINTEC-QOS-MIB
- OID
.0.3.1.2- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- qosPolicyEntry
- Table
- qosPolicyTable
- Siblings
- 14
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | class-based |
2 | high-priority |
3 | default |
4 | delete |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| qosPolicyIfIndex The unique interface index | column | SNMPv2-SMIInteger32 | .0.3.1.1 |
| qosPolicyRttMode This objects defines whether real-time transmission is enabled
for this queue or not, possible values:
enabled(1) = RTT is enabled
disabled(2) = RTT is disabled. | column | Enumeration | .0.3.1.10 |
| qosPolicyTxRate This object enables bandwidth limitation for the related
class, if set to zero (0) there is no limitation policy.
Otherwise this variable defines the maximum amount of bits
per se… | column | SNMPv2-SMIInteger32 | .0.3.1.17 |
| qosPolicyTxRateLimitation This objects determines the policy for the related class if
the transmission rate limit defined by qosPolicyTxRate is
reached. When set to not-bounded(1) allocation of remaining
b… | column | Enumeration | .0.3.1.18 |
| qosPolicyTxBurstSize The maximum number of octets in a single transmission burst. | column | SNMPv2-SMIInteger32 | .0.3.1.19 |
| qosPolicyLowerThreshold This variable defines the lower or minimum queue depth
threshold for packet dropping algorithm used for congestion
avoidance (see qosPolicyCongestionAvoidance). | column | Integer32 | .0.3.1.20 |
| qosPolicyUpperThreshold This variable defines the upper or maximum queue depth
threshold at which - depending on qosPolicyDropAlgorithm -
all newly arriving or packets enqueued former will be
dropped. | column | Integer32 | .0.3.1.21 |
| qosPolicyDescr A textual string describing this QoS policy. | column | OctetString | .0.3.1.22 |
| qosPolicyClassId Defines in conjunction with ipQoSClassId and qosPolicyType
the QoS policy to be applied on the classified IP traffic. | column | Integer32 | .0.3.1.3 |
| qosPolicyPriority The relative priority for this packet class to be used for
the packet scheduling as described via qosIfType. | column | Integer32 | .0.3.1.4 |
| qosPolicyWeight The relative weight for this packet class to be used for
the packet scheduling as described via qosIfType. | column | Integer32 | .0.3.1.5 |
| qosPolicyShaper This objects describes the traffic-shaping algorithm to be
used in order to limit the bandwidth for the related packet
class, possible values:
none(1) = no shaping defined
token… | column | Enumeration | .0.3.1.6 |
| qosPolicyCongestionAvoidance This objects defines a packet dropping algorithm to use if
more than qosPolicyLowerThreshold octets are enqueued. | column | Enumeration | .0.3.1.7 |
| qosPolicyDropAlgorithm This objects defines the packet dropping algorithm to apply
if more than qosPolicyUpperThreshold octets are currently
enqueued, possible values:
tail-drop(1) = drop all newly arr… | column | Enumeration | .0.3.1.9 |