potsIfFxsDataLinkModeOnHook
BINTEC-POTS-MIB ·
.0.14.1.3.1.12
Object
column
r/w
Enumeration
Selection of on-hook data transmission mode:
1: no on-hook data transmission
2: data transmission prior to ringing with DT-AS
3: data transmission prior to ringing with DT-AS
and polarity reversal
4: data transmission prior to ringing with RP-AS
5: data transmission during ringing (after first ring)
6: data transmission using DTMF
Context
- MIB
- BINTEC-POTS-MIB
- OID
.0.14.1.3.1.12- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- potsIfFxsEntry
- Table
- potsIfFxsTable
- Siblings
- 16
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | off |
2 | dt-as |
3 | dt-as-pol-rev |
4 | rp-as |
5 | during-ringing |
6 | dtmf |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| potsIfFxsIfIndex Index of the FXS interface. | column | PotsIfIndex | .0.14.1.3.1.1 |
| potsIfFxsDataLinkLevel Level of the data transmission signal (dB). | column | dB TransmitLevel | .0.14.1.3.1.10 |
| potsIfFxsDataLinkTiming Index of the timer set to be used for on-hook and off-hook
data transmission. | column | DataLinkTimerTabIndex | .0.14.1.3.1.11 |
| potsIfFxsDataLinkModeOffHook Selection of off-hook data transmission mode:
1: no off-hook data transmission
2: data transmission prior using DT-AS | column | Enumeration | .0.14.1.3.1.13 |
| potsIfFxsDialPulseMinTimePulse Pulse dialling break time minimum (ms). Break pulses below
this limit will be ignored. | column | ms Integer32 | .0.14.1.3.1.14 |
| potsIfFxsDialPulseMaxTimePulse Pulse dialling break time maximum (ms). A pause time above
this limit is regarded as on-hook signal. | column | ms Integer32 | .0.14.1.3.1.15 |
| potsIfFxsDialPulseMinTimePause Pulse dialling make time minimum (ms). Make pulses below
this limit will be ignored. | column | ms Integer32 | .0.14.1.3.1.16 |
| potsIfFxsDialPulseMaxTimePause Pulse dialling make time maximum (ms). A pause time above
this limit finishes the pulse counting and this digit is
regarded as complete. | column | ms Integer32 | .0.14.1.3.1.17 |
| potsIfFxsFlashMinTime Minimum flash duration (ms). Flash pulses below this
value will be ignored. | column | ms SNMPv2-SMIInteger32 | .0.14.1.3.1.2 |
| potsIfFxsFlashMaxTime Maximum flash duration (ms). Flash pulses above this
value will be interpreted as hook-on. | column | ms SNMPv2-SMIInteger32 | .0.14.1.3.1.3 |
| potsIfFxsRingLevel Peak value of sinusoidal ringing voltage. | column | Vpeak Integer32 | .0.14.1.3.1.4 |
| potsIfFxsRingFreq Frequency of sinusoidal ringing voltage. | column | Enumeration | .0.14.1.3.1.5 |
| potsIfFxsRingTableIndex The ringing table index is the reference to
all ringing cadences used for this extension.
Definitions are in phoneIfRingTable. | column | RingTabIndex | .0.14.1.3.1.6 |
| potsIfFxsToneTableIndex The tone table index refers to the tones
used for this extension. Definitions are
in phoneIfToneTable | column | ToneTabIndex | .0.14.1.3.1.7 |
| potsIfFxsDataLinkType Allowed data transmission message types:
setup - call setup message
mwi - message waiting indicator message
aoc - advice of charge message
sms - short message service message | column | Bits | .0.14.1.3.1.8 |
| potsIfFxsDataLinkElem Allowed data transmission parameters (see ETSI EN 300 659-3).
Not selected elements will be filtered out and not sent to
the subscriber. | column | Bits | .0.14.1.3.1.9 |