potsIfFxsDataLinkElem
BINTEC-POTS-MIB ·
.0.14.1.3.1.9
Object
column
r/w
Bits
Allowed data transmission parameters (see ETSI EN 300 659-3). Not selected elements will be filtered out and not sent to the subscriber.
Context
- MIB
- BINTEC-POTS-MIB
- OID
.0.14.1.3.1.9- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- potsIfFxsEntry
- Table
- potsIfFxsTable
- Siblings
- 16
Syntax
Bits
Values & Constraints
Enumerated Values
0 | date-time |
1 | calling-line-id |
2 | called-line-id |
3 | reason-for-absence-of-cli |
4 | calling-party-name |
5 | reason-for-absence-of-cpn |
6 | visual-indicator |
7 | message-identification |
8 | last-message-cli |
9 | complementary-date-time |
10 | complementary-cli |
11 | call-type |
12 | first-cli |
13 | no-of-messages |
14 | charge |
15 | additional-charge |
16 | duration-of-call |
17 | network-provider-id |
18 | carrier-id |
19 | select-terminal-function |
20 | display-information |
21 | service-information |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| potsIfFxsIfIndex Index of the FXS interface. | column | PotsIfIndex | .0.14.1.3.1.1 |
| potsIfFxsDataLinkLevel Level of the data transmission signal (dB). | column | dB TransmitLevel | .0.14.1.3.1.10 |
| potsIfFxsDataLinkTiming Index of the timer set to be used for on-hook and off-hook
data transmission. | column | DataLinkTimerTabIndex | .0.14.1.3.1.11 |
| potsIfFxsDataLinkModeOnHook Selection of on-hook data transmission mode:
1: no on-hook data transmission
2: data transmission prior to ringing with DT-AS
3: data transmission prior to ringing with DT-AS
… | column | Enumeration | .0.14.1.3.1.12 |
| potsIfFxsDataLinkModeOffHook Selection of off-hook data transmission mode:
1: no off-hook data transmission
2: data transmission prior using DT-AS | column | Enumeration | .0.14.1.3.1.13 |
| potsIfFxsDialPulseMinTimePulse Pulse dialling break time minimum (ms). Break pulses below
this limit will be ignored. | column | ms Integer32 | .0.14.1.3.1.14 |
| potsIfFxsDialPulseMaxTimePulse Pulse dialling break time maximum (ms). A pause time above
this limit is regarded as on-hook signal. | column | ms Integer32 | .0.14.1.3.1.15 |
| potsIfFxsDialPulseMinTimePause Pulse dialling make time minimum (ms). Make pulses below
this limit will be ignored. | column | ms Integer32 | .0.14.1.3.1.16 |
| potsIfFxsDialPulseMaxTimePause Pulse dialling make time maximum (ms). A pause time above
this limit finishes the pulse counting and this digit is
regarded as complete. | column | ms Integer32 | .0.14.1.3.1.17 |
| potsIfFxsFlashMinTime Minimum flash duration (ms). Flash pulses below this
value will be ignored. | column | ms SNMPv2-SMIInteger32 | .0.14.1.3.1.2 |
| potsIfFxsFlashMaxTime Maximum flash duration (ms). Flash pulses above this
value will be interpreted as hook-on. | column | ms SNMPv2-SMIInteger32 | .0.14.1.3.1.3 |
| potsIfFxsRingLevel Peak value of sinusoidal ringing voltage. | column | Vpeak Integer32 | .0.14.1.3.1.4 |
| potsIfFxsRingFreq Frequency of sinusoidal ringing voltage. | column | Enumeration | .0.14.1.3.1.5 |
| potsIfFxsRingTableIndex The ringing table index is the reference to
all ringing cadences used for this extension.
Definitions are in phoneIfRingTable. | column | RingTabIndex | .0.14.1.3.1.6 |
| potsIfFxsToneTableIndex The tone table index refers to the tones
used for this extension. Definitions are
in phoneIfToneTable | column | ToneTabIndex | .0.14.1.3.1.7 |
| potsIfFxsDataLinkType Allowed data transmission message types:
setup - call setup message
mwi - message waiting indicator message
aoc - advice of charge message
sms - short message service message | column | Bits | .0.14.1.3.1.8 |