potsIfFxoDialInProgressTone
BINTEC-POTS-MIB ·
.0.14.1.2.1.24
Object
The progress tone is used for dial in mode 'DTMF' only. Other dial in modes will ignore this entry. The progress tone will signal the caller when to start to dial the subscriber number. After reception of the first digit this tone will disappear like any other dial tone.
Context
- MIB
- BINTEC-POTS-MIB
- OID
.0.14.1.2.1.24- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- potsIfFxoEntry
- Table
- potsIfFxoTable
- Siblings
- 41
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| potsIfFxoIfIndex Index of the FXO interface. | column | PotsIfIndex | .0.14.1.2.1.1 |
| potsIfFxoDialToneAltCadence obsolete Alternative dial tone cadence. For a description of
allowed format refer to potsIfFxoDialToneOrgCadence. | column | CadenceString | .0.14.1.2.1.10 |
| potsIfFxoDialToneAltTolerance obsolete Alternative dial tone timing tolerance (%). | column | % CadenceTimingTolerance | .0.14.1.2.1.11 |
| potsIfFxoBusyToneDetection obsolete Type of tone:
off(1) no busy tone detection
single(2) detect just one tone rhythm
dual(3) detect also an alternative tone rhythm
Enable busy tone detecti… | column | Enumeration | .0.14.1.2.1.12 |
| potsIfFxoBusyToneDetectionTime obsolete Activation time for busy tone detection in seconds. When this
time is reached busy tone detection will be switched off.
A zero value keeps busy tone detection endlessly active. | column | s SNMPv2-SMIInteger32 | .0.14.1.2.1.13 |
| potsIfFxoBusyToneMinLevel obsolete Minimum busy tone level (dB). | column | dB ReceiveLevel | .0.14.1.2.1.14 |
| potsIfFxoBusyToneOrgFreq obsolete Busy tone frequncy (Hz). | column | Hz ToneFrequency | .0.14.1.2.1.15 |
| potsIfFxoBusyToneOrgCadence obsolete Busy tone cadence. For a description of allowed
format refer to potsIfFxoDialToneOrgCadence. | column | CadenceString | .0.14.1.2.1.16 |
| potsIfFxoBusyToneOrgTolerance obsolete Busy tone timing tolerance (%). | column | % CadenceTimingTolerance | .0.14.1.2.1.17 |
| potsIfFxoBusyToneAltFreq obsolete Alternative busy tone frequncy. | column | ToneFrequency | .0.14.1.2.1.18 |
| potsIfFxoBusyToneAltCadence obsolete Alternative busy tone cadence. For a description of
allowed format refer to potsIfFxoDialToneOrgCadence. | column | CadenceString | .0.14.1.2.1.19 |
| potsIfFxoFlashTime Dial out flash time (ms). | column | ms SNMPv2-SMIInteger32 | .0.14.1.2.1.2 |
| potsIfFxoBusyToneAltTolerance obsolete Alternative busy tone timing tolerance (%). | column | % CadenceTimingTolerance | .0.14.1.2.1.20 |
| potsIfFxoDialOutMode Dial-out mode (1: pulse, 2: DTMF). | column | Enumeration | .0.14.1.2.1.21 |
| potsIfFxoDialOutDelay Waiting time before dialout starts (ms). | column | ms SNMPv2-SMIInteger32 | .0.14.1.2.1.22 |
| potsIfFxoDialInMode Dial-in mode (1: off, 2: DTMF, 3: UEFS). | column | Enumeration | .0.14.1.2.1.23 |
| potsIfFxoDialInProgressToneDef Index of the progress tone definition in phoneIfToneTable. | column | ToneTabIndex | .0.14.1.2.1.25 |
| potsIfFxoDialPulsePulseTime Pulse dialling break time (ms). | column | ms Integer32 | .0.14.1.2.1.26 |
| potsIfFxoDialPulsePauseTime Pulse dialling make time (ms). | column | ms Integer32 | .0.14.1.2.1.27 |
| potsIfFxoDialPulseInterDigitTime DTMF dialling interdigit time (ms). | column | ms Integer32 | .0.14.1.2.1.28 |
| potsIfFxoDialDtmfLevel DTMF tone level (dB). | column | dB TransmitLevel | .0.14.1.2.1.29 |
| potsIfFxoDialToneDetection obsolete Type of tone:
off(1) no dial tone detection
single(2) detect just one tone rhythm
dual(3) detect also an alternative tone rhythm
Enable dial tone detecti… | column | Enumeration | .0.14.1.2.1.3 |
| potsIfFxoDialDtmfToneTime DTMF tone duration (ms). | column | ms Integer32 | .0.14.1.2.1.30 |
| potsIfFxoDialDtmfInterDigitTime DTMF dialling interdigit time (ms). | column | ms Integer32 | .0.14.1.2.1.31 |
| potsIfFxoDataLinkMinLevel Minimum data transmission level (dB). | column | dB TransmitLevel | .0.14.1.2.1.32 |
| potsIfFxoDataLinkModeOnHook Allowed on-hook data transmission modes:
dt-as: data transmission prior to ringing with DT-AS
dt-as-pol-rev: data transmission prior to ringing with DT-AS
… | column | Bits | .0.14.1.2.1.33 |
| potsIfFxoDataLinkModeOffHook Selection of off-hook data transmission mode:
1: no off-hook data transmission
2: data transmission prior using DT-AS | column | Enumeration | .0.14.1.2.1.34 |
| potsIfFxoFaxToneDetection Fax tone detection. Tones to detect according to ITU T.30:
cng: fax announce tone 1100 Hz
ced: fax answer tone 2100 Hz
dis: digital identification signal V.21 | column | Bits | .0.14.1.2.1.35 |
| potsIfFxoKeyBreakDetection Detection of key break as a release condition. | column | SNMPv2-TCTruthValue | .0.14.1.2.1.36 |
| potsIfFxoDialOutToneDetection Detection of dial tones as a trigger for outgoing dial. | column | SNMPv2-TCTruthValue | .0.14.1.2.1.37 |
| potsIfFxoNormalDialTone Index of the normal dial tone definition in
phoneIfToneTable used by dial out tone detection. | column | ToneDefTabIndex | .0.14.1.2.1.38 |
| potsIfFxoSpecialDialTone Index of the special dial tone definition in
phoneIfToneTable used by dial out tone detection. | column | ToneDefTabIndex | .0.14.1.2.1.39 |
| potsIfFxoDialToneDetectionTime obsolete Activation time for dial tone detection in seconds. When this
time is reached dial tone detection will be switched off.
A zero value keeps dial tone detection endlessly active. | column | s SNMPv2-SMIInteger32 | .0.14.1.2.1.4 |
| potsIfFxoConcurrentToneDetection Detection of tones after dialling and during a connection
to catch a release condition. | column | SNMPv2-TCTruthValue | .0.14.1.2.1.40 |
| potsIfFxoBusyTone Index of the busy tone definition in phoneIfToneTable
used by concurrent tone detection. | column | ToneDefTabIndex | .0.14.1.2.1.41 |
| potsIfFxoCongestionTone Index of the congestion tone definition in phoneIfToneTable
used by concurrent tone detection. | column | ToneDefTabIndex | .0.14.1.2.1.42 |
| potsIfFxoDialToneMinLevel obsolete minimum dial tone level. | column | dB ReceiveLevel | .0.14.1.2.1.5 |
| potsIfFxoDialToneOrgFreq obsolete Frequency of the expected dial tone (Hz). | column | Hz ToneFrequency | .0.14.1.2.1.6 |
| potsIfFxoDialToneOrgCadence obsolete Cadence of the expected dial tone.
The cadence definition consists of times of activity, times
of no activity and some control information. All information
is conc… | column | CadenceString | .0.14.1.2.1.7 |
| potsIfFxoDialToneOrgTolerance obsolete Dial tone timing tolerance (%). | column | % CadenceTimingTolerance | .0.14.1.2.1.8 |
| potsIfFxoDialToneAltFreq obsolete Alternative dial tone frequncy (Hz). | column | Hz ToneFrequency | .0.14.1.2.1.9 |