potsIfFxoBusyToneDetectionTime

BINTEC-POTS-MIB · .0.14.1.2.1.13
MIB view Table view

Object

column obsolete r/w s SNMPv2-SMIInteger32 
Activation time for busy tone detection in seconds. When this
time is reached busy tone detection will be switched off.
A zero value keeps busy tone detection endlessly active.

Context

MIB
BINTEC-POTS-MIB
OID
.0.14.1.2.1.13
Type
column
Access
readwrite
Status
obsolete
Units
s
Parent
potsIfFxoEntry
Table
potsIfFxoTable
Siblings
41

Syntax

s SNMPv2-SMIInteger32
Source
SNMPv2-SMIInteger32
Base type
Integer32

Values & Constraints

Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
potsIfFxoIfIndex
Index of the FXO interface.
columnPotsIfIndex.0.14.1.2.1.1
potsIfFxoDialToneAltCadence obsolete
Alternative dial tone cadence. For a description of allowed format refer to potsIfFxoDialToneOrgCadence.
columnCadenceString.0.14.1.2.1.10
potsIfFxoDialToneAltTolerance obsolete
Alternative dial tone timing tolerance (%).
column% CadenceTimingTolerance.0.14.1.2.1.11
potsIfFxoBusyToneDetection obsolete
Type of tone: off(1) no busy tone detection single(2) detect just one tone rhythm dual(3) detect also an alternative tone rhythm Enable busy tone detecti…
columnEnumeration.0.14.1.2.1.12
potsIfFxoBusyToneMinLevel obsolete
Minimum busy tone level (dB).
columndB ReceiveLevel.0.14.1.2.1.14
potsIfFxoBusyToneOrgFreq obsolete
Busy tone frequncy (Hz).
columnHz ToneFrequency.0.14.1.2.1.15
potsIfFxoBusyToneOrgCadence obsolete
Busy tone cadence. For a description of allowed format refer to potsIfFxoDialToneOrgCadence.
columnCadenceString.0.14.1.2.1.16
potsIfFxoBusyToneOrgTolerance obsolete
Busy tone timing tolerance (%).
column% CadenceTimingTolerance.0.14.1.2.1.17
potsIfFxoBusyToneAltFreq obsolete
Alternative busy tone frequncy.
columnToneFrequency.0.14.1.2.1.18
potsIfFxoBusyToneAltCadence obsolete
Alternative busy tone cadence. For a description of allowed format refer to potsIfFxoDialToneOrgCadence.
columnCadenceString.0.14.1.2.1.19
potsIfFxoFlashTime
Dial out flash time (ms).
columnms SNMPv2-SMIInteger32.0.14.1.2.1.2
potsIfFxoBusyToneAltTolerance obsolete
Alternative busy tone timing tolerance (%).
column% CadenceTimingTolerance.0.14.1.2.1.20
potsIfFxoDialOutMode
Dial-out mode (1: pulse, 2: DTMF).
columnEnumeration.0.14.1.2.1.21
potsIfFxoDialOutDelay
Waiting time before dialout starts (ms).
columnms SNMPv2-SMIInteger32.0.14.1.2.1.22
potsIfFxoDialInMode
Dial-in mode (1: off, 2: DTMF, 3: UEFS).
columnEnumeration.0.14.1.2.1.23
potsIfFxoDialInProgressTone
The progress tone is used for dial in mode 'DTMF' only. Other dial in modes will ignore this entry. The progress tone will signal the caller when to start to dial the subscriber…
columnSNMPv2-TCTruthValue.0.14.1.2.1.24
potsIfFxoDialInProgressToneDef
Index of the progress tone definition in phoneIfToneTable.
columnToneTabIndex.0.14.1.2.1.25
potsIfFxoDialPulsePulseTime
Pulse dialling break time (ms).
columnms Integer32.0.14.1.2.1.26
potsIfFxoDialPulsePauseTime
Pulse dialling make time (ms).
columnms Integer32.0.14.1.2.1.27
potsIfFxoDialPulseInterDigitTime
DTMF dialling interdigit time (ms).
columnms Integer32.0.14.1.2.1.28
potsIfFxoDialDtmfLevel
DTMF tone level (dB).
columndB TransmitLevel.0.14.1.2.1.29
potsIfFxoDialToneDetection obsolete
Type of tone: off(1) no dial tone detection single(2) detect just one tone rhythm dual(3) detect also an alternative tone rhythm Enable dial tone detecti…
columnEnumeration.0.14.1.2.1.3
potsIfFxoDialDtmfToneTime
DTMF tone duration (ms).
columnms Integer32.0.14.1.2.1.30
potsIfFxoDialDtmfInterDigitTime
DTMF dialling interdigit time (ms).
columnms Integer32.0.14.1.2.1.31
potsIfFxoDataLinkMinLevel
Minimum data transmission level (dB).
columndB TransmitLevel.0.14.1.2.1.32
potsIfFxoDataLinkModeOnHook
Allowed on-hook data transmission modes: dt-as: data transmission prior to ringing with DT-AS dt-as-pol-rev: data transmission prior to ringing with DT-AS …
columnBits.0.14.1.2.1.33
potsIfFxoDataLinkModeOffHook
Selection of off-hook data transmission mode: 1: no off-hook data transmission 2: data transmission prior using DT-AS
columnEnumeration.0.14.1.2.1.34
potsIfFxoFaxToneDetection
Fax tone detection. Tones to detect according to ITU T.30: cng: fax announce tone 1100 Hz ced: fax answer tone 2100 Hz dis: digital identification signal V.21
columnBits.0.14.1.2.1.35
potsIfFxoKeyBreakDetection
Detection of key break as a release condition.
columnSNMPv2-TCTruthValue.0.14.1.2.1.36
potsIfFxoDialOutToneDetection
Detection of dial tones as a trigger for outgoing dial.
columnSNMPv2-TCTruthValue.0.14.1.2.1.37
potsIfFxoNormalDialTone
Index of the normal dial tone definition in phoneIfToneTable used by dial out tone detection.
columnToneDefTabIndex.0.14.1.2.1.38
potsIfFxoSpecialDialTone
Index of the special dial tone definition in phoneIfToneTable used by dial out tone detection.
columnToneDefTabIndex.0.14.1.2.1.39
potsIfFxoDialToneDetectionTime obsolete
Activation time for dial tone detection in seconds. When this time is reached dial tone detection will be switched off. A zero value keeps dial tone detection endlessly active.
columns SNMPv2-SMIInteger32.0.14.1.2.1.4
potsIfFxoConcurrentToneDetection
Detection of tones after dialling and during a connection to catch a release condition.
columnSNMPv2-TCTruthValue.0.14.1.2.1.40
potsIfFxoBusyTone
Index of the busy tone definition in phoneIfToneTable used by concurrent tone detection.
columnToneDefTabIndex.0.14.1.2.1.41
potsIfFxoCongestionTone
Index of the congestion tone definition in phoneIfToneTable used by concurrent tone detection.
columnToneDefTabIndex.0.14.1.2.1.42
potsIfFxoDialToneMinLevel obsolete
minimum dial tone level.
columndB ReceiveLevel.0.14.1.2.1.5
potsIfFxoDialToneOrgFreq obsolete
Frequency of the expected dial tone (Hz).
columnHz ToneFrequency.0.14.1.2.1.6
potsIfFxoDialToneOrgCadence obsolete
Cadence of the expected dial tone. The cadence definition consists of times of activity, times of no activity and some control information. All information is conc…
columnCadenceString.0.14.1.2.1.7
potsIfFxoDialToneOrgTolerance obsolete
Dial tone timing tolerance (%).
column% CadenceTimingTolerance.0.14.1.2.1.8
potsIfFxoDialToneAltFreq obsolete
Alternative dial tone frequncy (Hz).
columnHz ToneFrequency.0.14.1.2.1.9