pimInterfaceDR
BINTEC-PIM-MIB ·
.0.54.2.1.1.1.5
Object
column
INET-ADDRESS-MIBInetAddressIPv6
The primary IP address of the Designated Router on this PIM interface. The InetAddressType is given by the pimInterfaceAddressType object.
Context
- MIB
- BINTEC-PIM-MIB
- OID
.0.54.2.1.1.1.5- Type
- column
- Access
- readonly
- Status
- current
- Parent
- pimInterfaceEntry
- Table
- pimInterfaceTable
- Siblings
- 27
Syntax
INET-ADDRESS-MIBInetAddressIPv6
- Source
- INET-ADDRESS-MIBInetAddressIPv6
- Base type
OctetString
Values & Constraints
Type Constraints
range: 16
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| pimInterfaceIfIndex The ifIndex value of this PIM interface. | column | IF-MIBInterfaceIndex | .0.54.2.1.1.1.1 |
| pimInterfaceHelloHoldtime The value set in the Holdtime field of PIM Hello messages
transmitted on this interface. A value of 65535 represents
an 'infinite' holdtime. Implementations are recommended
to u… | column | seconds Unsigned32 | .0.54.2.1.1.1.10 |
| pimInterfaceJoinPruneHoldtime The value inserted into the Holdtime field of a PIM
Join/Prune message sent on this interface. A value of 65535
represents an 'infinite' holdtime. Implementations are
recommende… | column | seconds Unsigned32 | .0.54.2.1.1.1.11 |
| pimInterfacePropagationDelay The expected propagation delay between PIM routers on this
network or link.
This router inserts this value into the Propagation_Delay
field of the LAN Prune Delay o… | column | seconds Unsigned32 | .0.54.2.1.1.1.12 |
| pimInterfaceOverrideInterval The value this router inserts into the Override_Interval
field of the LAN Prune Delay option in the PIM Hello
messages it sends on this interface.
When overriding a… | column | seconds Unsigned32 | .0.54.2.1.1.1.13 |
| pimInterfaceGenerationIDValue The value of the Generation ID this router inserted in the
last PIM Hello message it sent on this interface. | column | SNMPv2-SMIUnsigned32 | .0.54.2.1.1.1.14 |
| pimInterfaceDRPriority The Designated Router Priority value inserted into the DR
Priority option on this interface. Numerically higher
values for this object indicate higher priorities. | column | SNMPv2-SMIUnsigned32 | .0.54.2.1.1.1.15 |
| pimInterfaceLanDelayEnabled Evaluates to TRUE if all routers on this interface are
using the LAN Prune Delay option. | column | SNMPv2-TCTruthValue | .0.54.2.1.1.1.16 |
| pimInterfaceEffectPropagDelay The Effective Propagation Delay on this interface. This
object is always 1 if pimInterfaceLanDelayEnabled is
FALSE. | column | seconds Unsigned32 | .0.54.2.1.1.1.17 |
| pimInterfaceEffectOverrideIvl The Effective Override Interval on this interface. This
object is always 3 if pimInterfaceLanDelayEnabled is
FALSE. | column | seconds Unsigned32 | .0.54.2.1.1.1.18 |
| pimInterfaceSuppressionEnabled Whether join suppression is enabled on this interface.
This object is always TRUE if pimInterfaceLanDelayEnabled is
FALSE. | column | SNMPv2-TCTruthValue | .0.54.2.1.1.1.19 |
| pimInterfaceIPVersion The IP version of this PIM interface. A physical interface
may be configured in multiple modes concurrently, e.g. IPv4
and IPv6, however the traffic is considered to be logically… | column | INET-ADDRESS-MIBInetVersion | .0.54.2.1.1.1.2 |
| pimInterfaceBidirCapable Evaluates to TRUE if all routers on this interface are
using the Bidirectional-PIM Capable option. | column | SNMPv2-TCTruthValue | .0.54.2.1.1.1.20 |
| pimInterfaceDRPriorityEnabled Evaluates to TRUE if all routers on this interface are
using the DR Priority option. | column | SNMPv2-TCTruthValue | .0.54.2.1.1.1.21 |
| pimInterfaceDomainBorder Whether or not this interface is a PIM domain border. This
includes acting as a border for PIM Bootstrap Router (BSR)
messages, if the BSR mechanism is in use. | column | SNMPv2-TCTruthValue | .0.54.2.1.1.1.22 |
| pimInterfaceStatus The status of this entry. Creating the entry enables PIM
on the interface; destroying the entry disables PIM on the
interface.
This status object can be set to act… | column | SNMPv2-TCRowStatus | .0.54.2.1.1.1.23 |
| pimInterfaceStubInterface Whether this interface is a 'stub interface'. If this
object is set to TRUE, then no PIM packets are sent out this
interface, and any received PIM packets are ignored.
… | column | SNMPv2-TCTruthValue | .0.54.2.1.1.1.24 |
| pimInterfacePruneLimitInterval The minimum interval that must transpire between two
successive Prunes sent by a router. This object corresponds
to the 't_limit' timer value defined in the PIM-DM
specification.… | column | seconds Unsigned32 | .0.54.2.1.1.1.25 |
| pimInterfaceGraftRetryInterval The minimum interval that must transpire between two
successive Grafts sent by a router. This object corresponds
to the 'Graft_Retry_Period' timer value defined in the
PIM-DM spe… | column | seconds Unsigned32 | .0.54.2.1.1.1.26 |
| pimInterfaceSRPriorityEnabled Evaluates to TRUE if all routers on this interface are
using the State Refresh option. This object is used only by
PIM-DM. | column | SNMPv2-TCTruthValue | .0.54.2.1.1.1.27 |
| pimInterfaceRP The primary IP address of the Rendezvous Point on this PIM
interface. The InetAddressType is given by the
pimInterfaceAddressType object. | column | INET-ADDRESS-MIBInetAddressIPv6 | .0.54.2.1.1.1.28 |
| pimInterfaceAddressType The address type of this PIM interface. | column | INET-ADDRESS-MIBInetAddressType | .0.54.2.1.1.1.3 |
| pimInterfaceAddress The primary IP address of this router on this PIM
interface. The InetAddressType is given by the
pimInterfaceAddressType object. | column | INET-ADDRESS-MIBInetAddressIPv6 | .0.54.2.1.1.1.4 |
| pimInterfaceHelloInterval The frequency at which PIM Hello messages are transmitted
on this interface. This object corresponds to the
'Hello_Period' timer value defined in the PIM-SM
specification. A val… | column | seconds Unsigned32 | .0.54.2.1.1.1.6 |
| pimInterfaceTrigHelloInterval The maximum time before this router sends a triggered PIM
Hello message on this interface. This object corresponds to
the 'Trigered_Hello_Delay' timer value defined in the PIM-SM… | column | seconds Unsigned32 | .0.54.2.1.1.1.7 |
| pimInterfaceJoinPruneInterval The frequency at which this router sends PIM Join/Prune
messages on this PIM interface. This object corresponds to
the 't_periodic' timer value defined in the PIM-SM
specificatio… | column | seconds Unsigned32 | .0.54.2.1.1.1.8 |
| pimInterfaceDFElectionRobustness The minimum number of PIM DF-Election messages that must be
lost in order for DF election on this interface to fail. | column | SNMPv2-SMIUnsigned32 | .0.54.2.1.1.1.9 |