pimInAsserts
BINTEC-PIM-MIB ·
.0.54.2.1.23
Object
scalar
SNMPv2-SMICounter32
The number of Asserts received by this router. Asserts are multicast to all routers on a network. This counter is incremented by all routers that receive an assert, not only those routers that are contesting the assert.
Context
- MIB
- BINTEC-PIM-MIB
- OID
.0.54.2.1.23- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- pim
- Siblings
- 50
Syntax
SNMPv2-SMICounter32
- Source
- SNMPv2-SMICounter32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| pimInterfaceTable The (conceptual) table listing the router's PIM interfaces.
PIM is enabled on all interfaces listed in this table. | table | - | .0.54.2.1.1 |
| pimBidirDFElectionTable The (conceptual) table listing the per-RP Designated
Forwarder (DF) Election state for each interface for all the
RPs in BIDIR mode. | table | - | .0.54.2.1.10 |
| pimStarStarRPEntries The number of entries in the pimStarStarRPTable. | scalar | SNMPv2-SMIGauge32 | .0.54.2.1.101 |
| pimStarStarRPIEntries The number of entries in the pimStarStarRPITable. | scalar | SNMPv2-SMIGauge32 | .0.54.2.1.102 |
| pimStarStarRPTable The (conceptual) table listing the non-interface specific
(*,*,RP) state that PIM has. | table | - | .0.54.2.1.103 |
| pimStarStarRPITable The (conceptual) table listing the interface specific
(*,*,RP) state that PIM has. | table | - | .0.54.2.1.104 |
| pimStaticRPTable This table is used to create and manage static
configuration of RPs.
If the group prefixes configured for two or more rows in
this table overlap, the row with the great… | table | - | .0.54.2.1.11 |
| pimAnycastRPSetTable This table is used to create and manage Anycast-RP via PIM
Register messages, as opposed to via other protocols such as
MSDP.
Entries must be configured in this table i… | table | - | .0.54.2.1.12 |
| pimGroupMappingTable The (conceptual) table listing mappings from multicast
group prefixes to the PIM mode and RP address to use for
groups within that group prefix.
Rows in this table are … | table | - | .0.54.2.1.13 |
| pimKeepalivePeriod The duration of the Keepalive Timer. This is the period
during which the PIM router will maintain (S,G) state in the
absence of explicit (S,G) local membership or (S,G) join
mess… | scalar | seconds Unsigned32 | .0.54.2.1.14 |
| pimRegisterSuppressionTime The duration of the Register Suppression Timer. This is
the period during which a PIM Designated Router (DR) stops
sending Register-encapsulated data to the Rendezvous Point
(RP)… | scalar | seconds Unsigned32 | .0.54.2.1.15 |
| pimStarGEntries The number of entries in the pimStarGTable. | scalar | SNMPv2-SMIGauge32 | .0.54.2.1.16 |
| pimStarGIEntries The number of entries in the pimStarGITable. | scalar | SNMPv2-SMIGauge32 | .0.54.2.1.17 |
| pimSGEntries The number of entries in the pimSGTable. | scalar | SNMPv2-SMIGauge32 | .0.54.2.1.18 |
| pimSGIEntries The number of entries in the pimSGITable. | scalar | SNMPv2-SMIGauge32 | .0.54.2.1.19 |
| pimNeighborTable The (conceptual) table listing the router's PIM neighbors. | table | - | .0.54.2.1.2 |
| pimSGRptEntries The number of entries in the pimSGRptTable. | scalar | SNMPv2-SMIGauge32 | .0.54.2.1.20 |
| pimSGRptIEntries The number of entries in the pimSGRptITable. | scalar | SNMPv2-SMIGauge32 | .0.54.2.1.21 |
| pimOutAsserts The number of Asserts sent by this router. | scalar | SNMPv2-SMICounter32 | .0.54.2.1.22 |
| pimLastAssertInterface The interface on which this router most recently sent or
received an assert, or zero if this router has not sent or
received an assert. | scalar | IF-MIBInterfaceIndexOrZero | .0.54.2.1.24 |
| pimLastAssertGroupAddressType The address type of the multicast group address in the most
recently sent or received assert. If this router has not
sent or received an assert then this object is set to
unknown… | scalar | INET-ADDRESS-MIBInetAddressType | .0.54.2.1.25 |
| pimLastAssertGroupAddress The multicast group address in the most recently sent or
received assert. The InetAddressType is given by the
pimLastAssertGroupAddressType object. | scalar | INET-ADDRESS-MIBInetAddressIPv6 | .0.54.2.1.26 |
| pimLastAssertSourceAddressType The address type of the multicast source address in the
most recently sent or received assert. If the most recent
assert was (*,G), or if this router has not sent or received
an … | scalar | INET-ADDRESS-MIBInetAddressType | .0.54.2.1.27 |
| pimLastAssertSourceAddress The multicast source address in the most recently sent or
received assert. The InetAddressType is given by the
pimLastAssertSourceAddressType object. | scalar | INET-ADDRESS-MIBInetAddressIPv6 | .0.54.2.1.28 |
| pimNeighborLossTrapPeriod The minimum time that must elapse between pimNeighborLoss
traps originated by this router. The maximum value 65535
represents an 'infinite' time, in which case no
pimNeighborLoss… | scalar | seconds Unsigned32 | .0.54.2.1.29 |
| pimNbrSecAddressTable The (conceptual) table listing the secondary addresses
advertised by each PIM neighbor (on a subset of the rows of
the pimNeighborTable defined above). | table | - | .0.54.2.1.3 |
| pimNeighborLossCount The number of neighbor loss events that have occurred.
This count is incremented when the neighbor timer expires,
and the router has no other neighbors on the same inte… | scalar | SNMPv2-SMICounter32 | .0.54.2.1.30 |
| pimInvalidRegisterTrapPeriod The minimum time that must elapse between
pimInvalidRegister traps originated by this router. The
default value of 65535 represents an 'infinite' time, in
which case no pimInvali… | scalar | seconds Unsigned32 | .0.54.2.1.31 |
| pimInvalidRegisterMsgsRcvd The number of invalid PIM Register messages that have been
received by this device.
A PIM Register message is invalid if either
o the destination address of … | scalar | SNMPv2-SMICounter32 | .0.54.2.1.32 |
| pimInvalidRegisterAddressType The address type stored in pimInvalidRegisterOrigin,
pimInvalidRegisterGroup and pimInvalidRegisterRp.
If no unexpected Register messages have been received, then
this … | scalar | INET-ADDRESS-MIBInetAddressType | .0.54.2.1.33 |
| pimInvalidRegisterOrigin The source address of the last unexpected Register message
received by this device. | scalar | INET-ADDRESS-MIBInetAddressIPv6 | .0.54.2.1.34 |
| pimInvalidRegisterGroup The IP multicast group address to which the last unexpected
Register message received by this device was addressed. | scalar | INET-ADDRESS-MIBInetAddressIPv6 | .0.54.2.1.35 |
| pimInvalidRegisterRp The RP address to which the last unexpected Register
message received by this device was delivered. | scalar | INET-ADDRESS-MIBInetAddressIPv6 | .0.54.2.1.36 |
| pimInvalidJoinPruneTrapPeriod The minimum time that must elapse between
pimInvalidJoinPrune traps originated by this router. The
default value of 65535 represents an 'infinite' time, in
which case no pimInval… | scalar | seconds Unsigned32 | .0.54.2.1.37 |
| pimInvalidJoinPruneMsgsRcvd The number of invalid PIM Join/Prune messages that have
been received by this device.
A PIM Join/Prune message is invalid if either
o the Group to RP mapping… | scalar | SNMPv2-SMICounter32 | .0.54.2.1.38 |
| pimInvalidJoinPruneAddressType The address type stored in pimInvalidJoinPruneOrigin,
pimInvalidJoinPruneGroup and pimInvalidJoinPruneRp.
If no unexpected Join/Prune messages have been received,
this … | scalar | INET-ADDRESS-MIBInetAddressType | .0.54.2.1.39 |
| pimStarGTable The (conceptual) table listing the non-interface specific
(*,G) state that PIM has. | table | - | .0.54.2.1.4 |
| pimInvalidJoinPruneOrigin The source address of the last unexpected Join/Prune
message received by this device. | scalar | INET-ADDRESS-MIBInetAddressIPv6 | .0.54.2.1.40 |
| pimInvalidJoinPruneGroup The IP multicast group address carried in the last
unexpected Join/Prune message received by this device. | scalar | INET-ADDRESS-MIBInetAddressIPv6 | .0.54.2.1.41 |
| pimInvalidJoinPruneRp The RP address carried in the last unexpected Join/Prune
message received by this device. | scalar | INET-ADDRESS-MIBInetAddressIPv6 | .0.54.2.1.42 |
| pimRPMappingTrapPeriod The minimum time that must elapse between
pimRPMappingChange traps originated by this router. The
default value of 65535 represents an 'infinite' time, in
which case no pimRPMapp… | scalar | seconds Unsigned32 | .0.54.2.1.43 |
| pimRPMappingChangeCount The number of changes to active RP mappings on this device.
Information about active RP mappings is available in
pimGroupMappingTable. Only changes to active mappings … | scalar | SNMPv2-SMICounter32 | .0.54.2.1.44 |
| pimInterfaceElectionTrapPeriod The minimum time that must elapse between
pimInterfaceElection traps originated by this router. The
default value of 65535 represents an 'infinite' time, in
which case no pimInte… | scalar | seconds Unsigned32 | .0.54.2.1.45 |
| pimInterfaceElectionWinCount The number of times this device has been elected DR or DF
on any interface.
Elections occur frequently on newly-active interfaces, as
triggered Hellos establish adjacen… | scalar | SNMPv2-SMICounter32 | .0.54.2.1.46 |
| pimRefreshInterval The interval between successive State Refresh messages sent
by an Originator. This timer period is called the
RefreshInterval in the PIM-DM specification. This object is
used on… | scalar | seconds Unsigned32 | .0.54.2.1.47 |
| pimStarGITable The (conceptual) table listing the interface-specific (*,G)
state that PIM has. | table | - | .0.54.2.1.5 |
| pimSGTable The (conceptual) table listing the non-interface specific
(S,G) state that PIM has. | table | - | .0.54.2.1.6 |
| pimSGITable The (conceptual) table listing the interface-specific (S,G)
state that PIM has. | table | - | .0.54.2.1.7 |
| pimSGRptTable The (conceptual) table listing the non-interface specific
(S,G,rpt) state that PIM has. | table | - | .0.54.2.1.8 |
| pimSGRptITable The (conceptual) table listing the interface-specific
(S,G,rpt) state that PIM has. | table | - | .0.54.2.1.9 |