ipQoSTosSetRate
BINTEC-IPEXT-MIB ·
.0.22.1.7
Object
column
obsolete
r/w
Integer32
WARNING: this object is obsolete and must not be used. It
exists in this table for configuration conversion purposes.
Below is its previous definition:
Maximum amount of packets per second that should be TOS
changed.
Context
- MIB
- BINTEC-IPEXT-MIB
- OID
.0.22.1.7- Type
- column
- Access
- readwrite
- Status
- obsolete
- Parent
- ipQoSEntry
- Table
- ipQoSTable
- Siblings
- 29
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-65535
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ipQoSIndex Unique rule index. | column | Integer32 | .0.22.1.1 |
| ipQoSTosRemark obsolete WARNING: this object is obsolete and must not be used. It
exists in this table for configuration conversion purposes.
Below is its previous definition:
Value for TO… | column | Integer32 | .0.22.1.10 |
| ipQoSServiceClass This object specifies together with ipQoSClassId the class
of service used for the congestion management, priorization
and traffic shapping. If set to high-priority(2) (high
prior… | column | Enumeration | .0.22.1.11 |
| ipQoSClassId This object specifies together with ipQoSServiceClass
(normal(1) only) the class of service used for congestion
avoidance, congestion management, priorization and traffic
shapping… | column | Integer32 | .0.22.1.12 |
| ipQoSDirection This object specifies the direction for witch this classifier
rule applies on this interface, possible values:
outgoing(1) = used for outgoing packets only
incoming(2) = used for … | column | Enumeration | .0.22.1.13 |
| ipQoSTosSetRateLimitation obsolete WARNING: this object is obsolete and must not be used. It
exists in this table for configuration conversion purposes.
Below is its previous definition:
This field s… | column | Enumeration | .0.22.1.14 |
| ipQoSTosSetRateBps obsolete WARNING: this object is obsolete and must not be used. It
exists in this table for configuration conversion purposes.
Below is its previous definition:
Maximum amou… | column | bps Integer32 | .0.22.1.15 |
| ipQoSTosSetBurstBps obsolete WARNING: this object is obsolete and must not be used. It
exists in this table for configuration conversion purposes.
Below is its previous definition:
Maximum amou… | column | bps Integer32 | .0.22.1.16 |
| ipQoSClassifyAction This object specifies the action to be performed if the
associated filter matches. If set to disabled the filter is
not consulted and the next rule is processed immediately,
possi… | column | Enumeration | .0.22.1.17 |
| ipQoSExceedRateLimitation This field specifies a rate limitation between in-profile and
out-profile datagrams. Possible values:
none(1) = no limitation is defined.
packets(2) = a limitation is defined … | column | Enumeration | .0.22.1.18 |
| ipQoSExceedRate Maximum amount of packets per second that are considered
in-profile. Packets in excess of (ipQosExceedRate +
ipQosExceedBurst) are considered out-profile. | column | Integer32 | .0.22.1.19 |
| ipQoSFilterIndex References the associated filter (see IpFilterTable). | column | Integer32 | .0.22.1.2 |
| ipQoSExceedBurst Maximum additional amount of packets per second that are
considered in-profile. Packets in excess of (ipQosExceedRate
+ ipQosExceedBurst) are considered out-profile. | column | Integer32 | .0.22.1.20 |
| ipQoSExceedRateBps Maximum amount of traffic in bits per second that is
considered in-profile. Traffic in excess of
(ipQosExceedRateBps + ipQosExceedBurstBps) is considered
out-profile. | column | bps Integer32 | .0.22.1.21 |
| ipQoSExceedBurstBps Maximum amount of additional traffic that is considered
in-profile. Traffic in excess of
(ipQosExceedRateBps + ipQosExceedBurstBps) is considered
out-profile. | column | bps Integer32 | .0.22.1.22 |
| ipQoSTosAndMask AND mask applied to TOS field inside IP header of in-profile
datagrams. | column | Integer32 | .0.22.1.23 |
| ipQoSTosOrMask OR mask applied to TOS field inside IP header of in-profile
datagrams. | column | Integer32 | .0.22.1.24 |
| ipQoSLevel2PrioAndMask AND mask applied to level 2 priority associated with
in-profile datagrams. | column | Integer32 | .0.22.1.25 |
| ipQoSLevel2PrioOrMask OR mask applied to level 2 priority associated with
in-profile datagrams. | column | Integer32 | .0.22.1.26 |
| ipQoSTosAndMaskExceed AND mask applied to TOS field inside IP header of out-profile
datagrams. | column | Integer32 | .0.22.1.27 |
| ipQoSTosOrMaskExceed OR mask applied to TOS field inside IP header of out-profile
datagrams. | column | Integer32 | .0.22.1.28 |
| ipQoSLevel2PrioAndMaskExceed AND mask applied to level 2 priority associated with
out-profile datagrams. | column | Integer32 | .0.22.1.29 |
| ipQoSNextRuleIndex Specifies the next classifier rule to be processed if the
rule's associated filter does not match. The value 0 is used
to mark the end of the rule set. | column | Integer32 | .0.22.1.3 |
| ipQoSLevel2PrioOrMaskExceed OR mask applied to level 2 priority associated with
out-profile datagrams. | column | Integer32 | .0.22.1.30 |
| ipQoSDescr A textual string describing this classifier rules. | column | OctetString | .0.22.1.31 |
| ipQoSAction obsolete WARNING: this object is obsolete and must not be used. It
exists in this table for configuration conversion purposes.
Below is its previous definition:
This object … | column | Enumeration | .0.22.1.4 |
| ipQoSTos obsolete WARNING: this object is obsolete and must not be used. It
exists in this table for configuration conversion purposes.
Below is its previous definition:
Value for TO… | column | Integer32 | .0.22.1.5 |
| ipQoSTosSetBurst obsolete WARNING: this object is obsolete and must not be used. It
exists in this table for configuration conversion purposes.
Below is its previous definition:
Maximum amou… | column | Integer32 | .0.22.1.8 |
| ipQoSTosSetExceedAction obsolete WARNING: this object is obsolete and must not be used. It
exists in this table for configuration conversion purposes.
Below is its previous definition:
This object … | column | Enumeration | .0.22.1.9 |