ipNatPrIntPort
BINTEC-IPEXT-MIB ·
.0.6.1.10
Object
column
r/w
Integer32
This object specifies the internal target host's port-number
for incoming packets matching the table entry. If this
object is set to -1, the target portnumber will be
taken from the original incoming packet.
No translation of the portnumber will take place in this
case. If the set of portnumbers for this table entry is
a range instead of a single portnumber, this object will
specify the base of the target range of portnumbers. The
internal portnumber will be constructed as follows:
new-target-port := old-target-port
- ipNatPrExtPort
+ ipNatPrIntPort
Context
- MIB
- BINTEC-IPEXT-MIB
- OID
.0.6.1.10- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- ipNatPresetEntry
- Table
- ipNatPresetTable
- Siblings
- 12
Syntax
Integer32
Values & Constraints
Object Constraints
range: -1-65535
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ipNatPrIfIndex This object specifies the interface index, for which the
table entry shall be valid. If set to 0, the entry will
be valid for all interfaces configured to use NAT. | column | Integer32 | .0.6.1.1 |
| ipNatPrIntMask With ipNatPrIntAddr, this object specifies the internal target
host's IP address for incoming packets matching the table
entry.
An incoming packet matching this ent… | column | RFC1155-SMIIpAddress | .0.6.1.11 |
| ipNatPrTimeout When there is no traffic associated with a NAT entry, this
entry is discarded at the end of a timeout value. This object
holds this timeout value in seconds. If set to the defau… | column | seconds Integer32 | .0.6.1.12 |
| ipNatPrDescr A textual string describing this NAT forwarding rule. | column | OctetString | .0.6.1.13 |
| ipNatPrProtocol This object specifies the protocol, for which the table
entry shall be valid. | column | Enumeration | .0.6.1.2 |
| ipNatPrRemoteAddr This object specifies together with ipNatPrRemoteMask the
the set of IP addresses of remote hosts initiating a
session. The table entry will be valid for an incoming
packet, when … | column | RFC1155-SMIIpAddress | .0.6.1.3 |
| ipNatPrRemoteMask This object specifies together with ipNatPrRemoteAddr
the set of IP addresses of remote hosts initiating the
session. The table entry will be valid for an incoming
packet, when th… | column | RFC1155-SMIIpAddress | .0.6.1.4 |
| ipNatPrExtAddr This object specifies together with ipNatPrExtMask the
set of destination IP addresses, for which the table entry
shall be valid. The entry is valid, if the target IP
address of a… | column | RFC1155-SMIIpAddress | .0.6.1.5 |
| ipNatPrExtMask This object specifies together with ipNatPrExtAddr the
set of destination IP addresses, for which the table entry
shall be valid. The entry is valid, if the target IP
address of a… | column | RFC1155-SMIIpAddress | .0.6.1.6 |
| ipNatPrExtPort This object specifies together with ipNatPrExtPortRange the
range of port numbers for incoming packets, for which the table
entry shall be valid. If both objects are set to -1, th… | column | Integer32 | .0.6.1.7 |
| ipNatPrExtPortRange This object specifies together with ipNatPrExtPort the
range of portnumbers for incoming packets, for which the table
entry shall be valid. If both objects are set to -1, the
entr… | column | Integer32 | .0.6.1.8 |
| ipNatPrIntAddr With ipNatPrIntMask, this object specifies the internal target
host's IP address for incoming packets matching the table
entry.
An incoming packet matching this ent… | column | RFC1155-SMIIpAddress | .0.6.1.9 |