ipExtRtNextHop
BINTEC-IPEXT-MIB ·
.0.4.1.15
Object
This object is used on point-to-multipoint interfaces with indirect routes (see ipExrRtType) to specify the IP-address of the gateway on the network, where the datagram should be routed to.
Context
- MIB
- BINTEC-IPEXT-MIB
- OID
.0.4.1.15- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- ipExtRtEntry
- Table
- ipExtRtTable
- Siblings
- 23
Syntax
RFC1155-SMIIpAddress
- Source
- RFC1155-SMIIpAddress
- Base type
OctetString
Values & Constraints
Type Constraints
range: 4
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ipExtRtProtocol This object specifies the value of the protocolfield in
the ip header for all IP-datagrams belonging to the set.
If this object is set to dont-verify, the value of the
protocol fi… | column | Enumeration | .0.4.1.1 |
| ipExtRtDstPortRange This object describes together with ipExtRtDstPort the
range of target-portnumbers of the IP-datagrams belonging to
the set. All portnumbers between and including the two
objects … | column | Integer32 | .0.4.1.10 |
| ipExtRtTos This object describes together with ipExtRtTosMask the
range of the Type of Service field (TOS) in the IP-header
of the IP-datagrams belonging to the set. A TOS value is
consider… | column | Integer32 | .0.4.1.11 |
| ipExtRtTosMask This object describes together with ipExtRtTos the
range of the Type of Service field (TOS) in the IP-header
of the IP-datagrams belonging to the set. A TOS value is
considered w… | column | Integer32 | .0.4.1.12 |
| ipExtRtDstIfMode This object describes different behavior depending on the
ifOperStatus of the destination interface:
dialup-wait:
The route matches, when the ifOperStatus of the
… | column | Enumeration | .0.4.1.13 |
| ipExtRtDstIfIndex This object specifies the destination interface for the
IP-datagrams belonging to the set. If the value of this
object is set to 0, the datagrams of the set are discarded
and an I… | column | Integer32 | .0.4.1.14 |
| ipExtRtType This object specifies, on point-to-multipoint interface
whether the datagram shall be sent to the destination
IP address in the IP datagram header (direct) or
to a gateway (indire… | column | Enumeration | .0.4.1.16 |
| ipExtRtMetric1 This object is used to specify an order on the entries
in the ipExtRtTable. If a datagram is matching multiple
entries, the entry with the lowest value of ipExtRtMetric1
is choose… | column | Integer32 | .0.4.1.17 |
| ipExtRtMetric2 Undefined yet; for further extension | column | Integer32 | .0.4.1.18 |
| ipExtRtMetric3 Undefined yet; for further extension | column | Integer32 | .0.4.1.19 |
| ipExtRtSrcIfIndex This object specifies the source index of the IP-datagrams.
If this object has a value other than 0, only datagrams
received over the interface with the appropriate interface
ind… | column | Integer32 | .0.4.1.2 |
| ipExtRtMetric4 Undefined yet; for further extension | column | Integer32 | .0.4.1.20 |
| ipExtRtMetric5 Undefined yet; for further extension | column | Integer32 | .0.4.1.21 |
| ipExtRtProto This object describes, how the route has been gained.
This will normaly be netmgmt, because there is currently
no routing protocol, that is able to handle extended routes. | column | Enumeration | .0.4.1.22 |
| ipExtRtAge This object specifies the age of the route. | column | RFC1155-SMITimeTicks | .0.4.1.23 |
| ipExtRtDescription A textual string describing this extended route. | column | OctetString | .0.4.1.24 |
| ipExtRtSrcAddr This object describes together with ipExtRtSrcMask the
range of the source-addresses of the IP-datagrams belonging
to the set. If both objects are set to 0.0.0.0 the source-
addr… | column | RFC1155-SMIIpAddress | .0.4.1.3 |
| ipExtRtSrcMask This object describes together with ipExtRtSrcAddr the
range of the source-addresses of the IP-datagrams belonging
to the set. If both objects are set to 0.0.0.0 the source-
addr… | column | RFC1155-SMIIpAddress | .0.4.1.4 |
| ipExtRtSrcPort This object describes together with ipExtRtSrcPortRange the
range of source portnumbers of the IP-datagrams belonging to
the set. All portnumbers between and including the two
obj… | column | Integer32 | .0.4.1.5 |
| ipExtRtSrcPortRange This object describes together with ipExtRtSrcPort the
range of source portnumbers of the IP-datagrams belonging to
the set. All portnumbers between and including the two
objects … | column | Integer32 | .0.4.1.6 |
| ipExtRtDstAddr This object describes together with ipExtRtDstMask the
range of the target-addresses of the IP-datagrams belonging
to the set. If both objects are set to 0.0.0.0 the target-
addr… | column | RFC1155-SMIIpAddress | .0.4.1.7 |
| ipExtRtDstMask This object describes together with ipExtRtDstAddr the
range of the target-addresses of the IP-datagrams belonging
to the set. If both objects are set to 0.0.0.0 the target-
addr… | column | RFC1155-SMIIpAddress | .0.4.1.8 |
| ipExtRtDstPort This object describes together with ipExtRtDstPortRange the
range of target-portnumbers of the IP-datagrams belonging to
the set. All portnumbers between and including the two
obj… | column | Integer32 | .0.4.1.9 |