gpsZoneValid
BINTEC-GPS-MIB ·
.0.68.3.1.22
Object
column
Enumeration
This object shows if the current position is in the defined zone (true) or not (false).
Context
- MIB
- BINTEC-GPS-MIB
- OID
.0.68.3.1.22- Type
- column
- Access
- readonly
- Status
- current
- Parent
- gpsZoneEntry
- Table
- gpsZoneTable
- Siblings
- 26
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| gpsZoneIndex The index of a GPS location zone. | column | Integer32 | .0.68.3.1.1 |
| gpsZonePointBLongDeg Value of the degrees for the longitudinal position of point B.
This can vary between 0 and 180. | column | Integer32 | .0.68.3.1.10 |
| gpsZonePointBLongMinInt Value for the whole part of the longitudinal minutes of point B.
This can vary between 0 and 59. | column | Integer32 | .0.68.3.1.11 |
| gpsZonePointBLongMinDec Value for the decimal part of the longitudinal minutes of point B.
This can vary between 0 and 9999. | column | Integer32 | .0.68.3.1.12 |
| gpsZonePointBLongCard Represents the cardinal point to the longitude where the point is
found. This can take the values East and West.
Default is West. | column | Enumeration | .0.68.3.1.13 |
| gpsZonePointBLatDeg Value of the degrees for the latitudinal position of point B.
This can vary between 0 and 90. | column | Integer32 | .0.68.3.1.14 |
| gpsZonePointBLatMinInt Value for the whole part of the latitudinal minutes of point B.
This can vary between 0 and 59. | column | Integer32 | .0.68.3.1.15 |
| gpsZonePointBLatMinDec Value for the decimal part of the latitudinal minutes of point B.
This can vary between 0 and 9999. | column | Integer32 | .0.68.3.1.16 |
| gpsZonePointBLatCard Represents the cardinal point to the latitudinal where the point is
found. This can take the values north and south.
Default is north. | column | Enumeration | .0.68.3.1.17 |
| gpsZoneTimeToTrue This object defines the time that must lapse so the zone can pass from
FALSE to TRUE when the device has good GPS coverage. This transition is
invoked as the GPS reveiver passes t… | column | seconds Integer32 | .0.68.3.1.18 |
| gpsZoneTimeToFalse This object define the time that must laspe so the zone can pass from
TRUE to FALSE when the device has good GPS coverage. This transition is
invoked as the GPS receiver passes to… | column | seconds Integer32 | .0.68.3.1.19 |
| gpsZonePointALongDeg Value of the degrees for the longitudinal position of point A.
This can vary between 0 and 180. | column | Integer32 | .0.68.3.1.2 |
| gpsZoneHdop This object configures the HDOP limit value to take the GPS
information as valid. When the HDOP calculated by the GPS receiver
surpasses the value configured with this parameter, … | column | Integer32 | .0.68.3.1.20 |
| gpsZoneRowStatus The row-status of this GPS zone entry. | column | SNMPv2-TCRowStatus | .0.68.3.1.21 |
| gpsZoneInitialState This object defines the state the GPS zone must take when the device is
switched on and there is no GPS signal available.
true: The initial state of the zone is TRUE.
false: The i… | column | Enumeration | .0.68.3.1.23 |
| gpsZoneInitialStateTime This object defines the time for state transition defined by InitialState
when the device is switched on and no GPS signal is available. | column | seconds Integer32 | .0.68.3.1.24 |
| gpsZoneCoverageFailState This object defines the state the GPS zone must take when the GPS receiver
loses coverage or doesn't have enough to accurately calculate the
geographical position.
true: The state… | column | Enumeration | .0.68.3.1.25 |
| gpsZoneCoverageFailStateTime This object defines the time for state transition defined by
CoverageFailState when no GPS signal is available. | column | seconds Integer32 | .0.68.3.1.26 |
| gpsZoneDescription A textual string describing this zone. | column | OctetString | .0.68.3.1.27 |
| gpsZonePointALongMinInt Value for the whole part of the longitudinal minutes of point A.
This can vary between 0 and 59. | column | Integer32 | .0.68.3.1.3 |
| gpsZonePointALongMinDec Value for the decimal part of the longitudinal minutes of point A.
This can vary between 0 and 9999. | column | Integer32 | .0.68.3.1.4 |
| gpsZonePointALongCard Represents the cardinal point to the longitude where the point is
found. This can take the values East and West.
Default is West. | column | Enumeration | .0.68.3.1.5 |
| gpsZonePointALatDeg Value of the degrees for the latitudinal position of point A.
This can vary between 0 and 90. | column | Integer32 | .0.68.3.1.6 |
| gpsZonePointALatMinInt Value for the whole part of the latitudinal minutes of point A.
This can vary between 0 and 59. | column | Integer32 | .0.68.3.1.7 |
| gpsZonePointALatMinDec Value for the decimal part of the latitudinal minutes of point A.
This can vary between 0 and 9999. | column | Integer32 | .0.68.3.1.8 |
| gpsZonePointALatCard Represents the cardinal point to the latitudinal where the point is
found. This can take the values north and south.
Default is north. | column | Enumeration | .0.68.3.1.9 |