ipStatAddrTftpServer1
BINTEC-DYNIP-MIB ·
.0.52.7.1.14
Object
The IP address of the first TFTP server given to the client via 'TFTP server option' (DHCP option 150). If this address is 0.0.0.0, then only the IP address specified in ipDynAddrTftpServer2 will be considered. If both addresses are 0.0.0.0, no DHCP option 150 will be returned to the client. If both ipStatAddrTftpServer1 and ipStatAddrTftpServer2 are not specified (value 255.255.255.255), the DHCP option 150 returned to the client will be configured according to the values specified in entries ipDhcpPoolTftpServer1 and ipDhcpPoolTftpServer2.
Context
- MIB
- BINTEC-DYNIP-MIB
- OID
.0.52.7.1.14- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- ipStatAddrEntry
- Table
- ipStatAddrTable
- Siblings
- 16
Syntax
SNMPv2-SMIIpAddress
- Source
- SNMPv2-SMIIpAddress
- Base type
OctetString
Values & Constraints
Type Constraints
range: 4
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ipStatAddrAddress The IP address to assign to the client. The IP address has
to come from a dynamic IP address pool. | column | SNMPv2-SMIIpAddress | .0.52.7.1.1 |
| ipStatAddrLeaseTime Specifies the amount of time (in minutes) the IP address is
leased to the client.
If no lease time is specified (-1) the value from the related
entry in ipDhcpPoolTable determine… | column | Integer32 | .0.52.7.1.10 |
| ipStatAddrAliveInterval This object specifies a time period in seconds for checking
whether the client is still alive. The alive check allows the
system to purge dynamic entries whose lease is still va… | column | SNMPv2-SMIInteger32 | .0.52.7.1.11 |
| ipStatAddrRadiusAcct Enables or disables the radius accounting for this entry.
- default : related entry in ipDhcpPoolTable determines
the radius accounting
- disable : disables radius ac… | column | Enumeration | .0.52.7.1.12 |
| ipStatAddrRadiusGroupId This object specifies the radius group Id which is used by the
radius daemon to find the associated server entry in
radiusSrvTable for accounting purposes. See description of
rad… | column | SNMPv2-SMIInteger32 | .0.52.7.1.13 |
| ipStatAddrTftpServer2 The IP address of the second TFTP server given to the client
via 'TFTP server option' (DHCP option 150).
If this address is 0.0.0.0, then only the IP address specified
in ipDynA… | column | SNMPv2-SMIIpAddress | .0.52.7.1.15 |
| ipStatAddrOfferOptionsGroupID Identifies the option or set of options which are added
to the original DHCP OFFER message issued by the DHCP
server before delivering it to the DHCP client. The
options are de… | column | Integer32 | .0.52.7.1.16 |
| ipStatAddrAckOptionsGroupID Identifies the option or set of options which are added
to the original DHCP ACK message issued by the DHCP
server before delivering it to the DHCP client. The
options are defi… | column | Integer32 | .0.52.7.1.17 |
| ipStatAddrUserType This object specifies the subsystem which does the static
assignment (actual only DHCP). | column | Enumeration | .0.52.7.1.2 |
| ipStatAddrGatewayEnabled Specifies if 'router option' is delivered within BOOTP
REPLY message. If this object is set to 'yes' router option
is filled depending on ipStatAddrGateway respectively
ipDhcpPo… | column | Enumeration | .0.52.7.1.3 |
| ipStatAddrGateway The default gateway given to the client via 'router option'.
An IP address of 0.0.0.0 uses the local IP address of the
interface where the request came in if the server and clien… | column | SNMPv2-SMIIpAddress | .0.52.7.1.4 |
| ipStatAddrDnsServer1 This object specifies the Primary Domain Name Server to be
given to the client via 'domain name server option'.
If both ipStatAddrDnsServer1 and ipStatAddrDnsServer2 are not
spe… | column | SNMPv2-SMIIpAddress | .0.52.7.1.5 |
| ipStatAddrDnsServer2 This object specifies the Secondary Domain Name Server to be
given to the client via 'domain name server option'.
If both ipStatAddrDnsServer1 and ipDynAddrDnsServer2 are not
sp… | column | SNMPv2-SMIIpAddress | .0.52.7.1.6 |
| ipStatAddrClientId Specifies the client identifier of the DHCP client.
If not empty it is used to compare with the client identifier
in DHCP request message. | column | OctetString | .0.52.7.1.7 |
| ipStatAddrPhysAddress Specifies the hardware (MAC) address of the DHCP client.
If not empty it is used to compare with the hardware address
in DHCP request message. | column | SNMPv2-TCPhysAddress | .0.52.7.1.8 |
| ipStatAddrHostName The hostname of this client.
It is the hostname to be used by the client and delivered via
the reply. | column | SNMPv2-TCDisplayString | .0.52.7.1.9 |