ipDynaAddrUserType
BINTEC-DYNIP-MIB ·
.0.52.8.1.2
Object
column
Enumeration
Local subsystem that uses this entry respectively assigns the IP address of this entry. UserType 'unknown' means that the entry is not associated with any local subsystem.
Context
- MIB
- BINTEC-DYNIP-MIB
- OID
.0.52.8.1.2- Type
- column
- Access
- readonly
- Status
- current
- Parent
- ipDynaAddrEntry
- Table
- ipDynaAddrTable
- Siblings
- 21
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | unknown |
2 | dhcp |
3 | ppp |
4 | ipsec |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ipDynaAddrAddress The IP address assigned to the client. | column | SNMPv2-SMIIpAddress | .0.52.8.1.1 |
| ipDynaAddrHostName Hostname of the DHCP client.
This object is only relevant for entries with UserType dhcp. | column | SNMPv2-TCDisplayString | .0.52.8.1.10 |
| ipDynaAddrLeaseTime Time (in minutes) the IP address is leased to the client.
This object is only relevant for entries with UserType dhcp. | column | Integer32 | .0.52.8.1.11 |
| ipDynaAddrAliveInterval Time period in seconds for checking whether the client is
still alive. If its value is 0, no alive check is performed.
This object is only relevant for entries with UserType dhc… | column | SNMPv2-SMIInteger32 | .0.52.8.1.12 |
| ipDynaAddrRadiusAcct Displays if radius accounting is enabled for this entry.
- disable : radius accounting is disabled
- enable : radius accounting is enabled
- default : final value (disabled or en… | column | Enumeration | .0.52.8.1.13 |
| ipDynaAddrRadiusGroupId Radius group Id which is used by the radius daemon to find
the associated server entry in radiusSrvTable for accounting
purposes. See description of radiusSrvGroupId for details… | column | SNMPv2-SMIInteger32 | .0.52.8.1.14 |
| ipDynaAddrPoolId The identifier of the dynamic address pool this entry
belongs to. | column | DynIpPoolId | .0.52.8.1.15 |
| ipDynaAddrIfIndex The interface index of the interface where client is
connected. | column | SNMPv2-SMIInteger32 | .0.52.8.1.16 |
| ipDynaAddrExpires Point of time until the client owns the IP address.
Before the expiration of this term the client has to renew
its IP address.
This object is only relevant for entries with Use… | column | - | .0.52.8.1.17 |
| ipDynaAddrState The state of this entry.
- init : initial state (temporary)
- checking : the related IP address is checked for
address conflicts (temporary)
- foreign : the related I… | column | Enumeration | .0.52.8.1.18 |
| ipDynaAddrTftpServer1 The IP address of the first TFTP server given to the client
via 'TFTP server option' (DHCP option 150).
This object is only relevant for entries with UserType dhcp. | column | SNMPv2-SMIIpAddress | .0.52.8.1.19 |
| ipDynaAddrTftpServer2 The IP address of the second TFTP server given to the client
via 'TFTP server option' (DHCP option 150).
This object is only relevant for entries with UserType dhcp. | column | SNMPv2-SMIIpAddress | .0.52.8.1.20 |
| ipDynaAddrOfferOptionsGroupID Identifier of option or of set of options which are added
to the original DHCP OFFER message issued by the DHCP
server before delivering it to the DHCP client. The
options are … | column | Integer32 | .0.52.8.1.21 |
| ipDynaAddrAckOptionsGroupID Identifier of option or of set of options which are added
to the original DHCP ACK message issued by the DHCP
server before delivering it to the DHCP client. The
options are de… | column | Integer32 | .0.52.8.1.22 |
| ipDynaAddrType The type of this entry.
- dynamic : entry was created in consequence of a dynamic
IP address assignment or if IP address usage by
own or foreign device was d… | column | Enumeration | .0.52.8.1.3 |
| ipDynaAddrGatewayEnabled Displays if 'router option' is delivered within BOOTP
REPLY message. If this object is set to 'yes' router option
is filled depending on ipDhcpPoolGateway and possibly
ipStatAdd… | column | Enumeration | .0.52.8.1.4 |
| ipDynaAddrGateway The default gateway given to the client via 'router option'
if ipDynaAddrGatewayEnabled is set to 'yes'.
This object is only relevant for entries with UserType dhcp. | column | SNMPv2-SMIIpAddress | .0.52.8.1.5 |
| ipDynaAddrDnsServer1 The Primary Domain Name Server given to the client via
'domain name server option'. | column | SNMPv2-SMIIpAddress | .0.52.8.1.6 |
| ipDynaAddrDnsServer2 The Secondary Domain Name Server given to the client via
'domain name server option'. | column | SNMPv2-SMIIpAddress | .0.52.8.1.7 |
| ipDynaAddrClientId Client identifier of the DHCP client.
This object is only relevant for entries with UserType dhcp. | column | OctetString | .0.52.8.1.8 |
| ipDynaAddrPhysAddress Hardware (MAC) address of the DHCP client.
This object is only relevant for entries with UserType dhcp. | column | SNMPv2-TCPhysAddress | .0.52.8.1.9 |