ipDhcpPoolAliveCheck

BINTEC-DYNIP-MIB · .0.52.3.1.9

MIB view Table view

Object

column r/w Enumeration

Enables or disables the alive checking for the associated pool. 
The alive check allows the system to purge dynamic entries 
whose lease is still valid but the client no longer exists.
 - disabled     : disables alive check for pool users
 - enabled      : enables alive check for pool users

Context

MIB: BINTEC-DYNIP-MIB
OID: .0.52.3.1.9
Type: column
Access: readwrite
Status: current
Parent: ipDhcpPoolEntry
Table: ipDhcpPoolTable
Siblings: 15

Syntax

Enumeration

Values & Constraints

Enumerated Values

`1`	disabled
`2`	enabled

Related Objects

Sibling Objects

Object	Type	Syntax	OID
ipDhcpPoolIfIndex The index for the interface for which the DHCP subsystem is answering DHCP requests using the associated dynamic address pool.	column	SNMPv2-SMIInteger32	`.0.52.3.1.1`
ipDhcpPoolAliveInterval This object specifies a time period in seconds for checking whether the client is still alive. If this object is set to 0, no alive check is performed. If in case of manual assi…	column	SNMPv2-SMIInteger32	`.0.52.3.1.10`
ipDhcpPoolTftpServer1 The IP address of the first TFTP server given to the client via 'TFTP server option' (DHCP option 150). If in case of manual assigned IP address either ipStatAddrTftpServer1 or …	column	SNMPv2-SMIIpAddress	`.0.52.3.1.11`
ipDhcpPoolTftpServer2 The IP address of the second TFTP server given to the client via 'TFTP server option' (DHCP option 150). If in case of manual assigned IP address either ipStatAddrTftpServer1 or…	column	SNMPv2-SMIIpAddress	`.0.52.3.1.12`
ipDhcpPoolOfferOptionsGroupID Identifies the option or set of options which are added to the original DHCP OFFER message issued by the DHCP server before delivering it to the DHCP client. The options are de…	column	Integer32	`.0.52.3.1.13`
ipDhcpPoolAckOptionsGroupID Identifies the option or set of options which are added to the original DHCP ACK message issued by the DHCP server before delivering it to the DHCP client. The options are defi…	column	Integer32	`.0.52.3.1.14`
ipDhcpPoolGatewayEnabled Specifies if 'router option' is delivered within BOOTP REPLY message. If this object is set to 'yes' router option is filled depending on ipDhcpPoolGateway. If this object is set…	column	Enumeration	`.0.52.3.1.15`
ipDhcpPoolSendRepliesToRelay As soon as a DHCP request includes a client IP address (ciaddr), RFC 1542 recommends that the server unicast the relevant DHCP reply message to the client IP address. Neverthel…	column	Enumeration	`.0.52.3.1.16`
ipDhcpPoolDynAddrPoolId Uniquely identifies associated dynamic address pool from which the DHCP requests are served from.	column	DynIpPoolId	`.0.52.3.1.2`
ipDhcpPoolAssignmentMode Indicates, to which DHCP clients addresses from the associated dynamic address pool will be assigned: to clients in local network (local) or/and to clients that ask for ip addres…	column	Bits	`.0.52.3.1.3`
ipDhcpPoolEnabled Enable, disable or delete the table entry.	column	Enumeration	`.0.52.3.1.4`
ipDhcpPoolLeaseTime Specifies the amount of time (in minutes) IP addresses of the associated pool are leased to clients. If in case of manual assigned IP address ipStatAddrLeaseTime value is specifi…	column	Integer32	`.0.52.3.1.5`
ipDhcpPoolGateway The default gateway given to the client via 'router option'. An IP address of 0.0.0.0 uses the local IP address of the interface where the request came in if the server and clien…	column	SNMPv2-SMIIpAddress	`.0.52.3.1.6`
ipDhcpPoolRadiusAcct Enables or disables the radius accounting for IP addresses of the associated pool: - disabled : disables radius accounting - enabled : enables radius accounting If in case…	column	Enumeration	`.0.52.3.1.7`
ipDhcpPoolRadiusGroupId This object specifies the radius group Id which is used by the radius daemon to find the associated server entry in radiusSrvTable for accounting purposes. See description of rad…	column	SNMPv2-SMIInteger32	`.0.52.3.1.8`