x25ToTcpX25LocNSAP
BIANCA-BRICK-X25TOTCP-MIB ·
.1.3.6.1.4.1.272.4.6.9.1.5
Object
column
mandatory
r/w
The local NSAP in the X25 call. If empty, the
local NSAP will not be matched. The NSAP is preceeded
by an 'X' if it is an OSI compatible NSAP or by a 'N' if
the NSAP is in a not OSI compatible format. The wildcards
'*', '?', '[', ']', '{', '}' may be used.
Context
- MIB
- BIANCA-BRICK-X25TOTCP-MIB
- OID
.1.3.6.1.4.1.272.4.6.9.1.5- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- x25ToTcpEntry
- Table
- x25ToTcpTable
- Siblings
- 26
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| x25ToTcpIndex mandatory The unique number of the MIB row. | column | Integer32 | .1.3.6.1.4.1.272.4.6.9.1.1 |
| x25ToTcpX25Cug mandatory If this object has a value other than -1, a Closed User Group
facility will be generated for outgoing X.25 calls. The value
will be the value of the object. | column | Integer32 | .1.3.6.1.4.1.272.4.6.9.1.10 |
| x25ToTcpX25CugOutgoing mandatory If this object has a value other than -1, a Closed User Group
Outgoing facility will be generated for outgoing X.25 calls.
The value will be the value of the object. | column | Integer32 | .1.3.6.1.4.1.272.4.6.9.1.11 |
| x25ToTcpX25CugBilateral mandatory If this object has a value other than -1, a Closed User Group
Bilateral facility will be generated for outgoing X.25 calls.
The value will be the value of the object. | column | Integer32 | .1.3.6.1.4.1.272.4.6.9.1.12 |
| x25ToTcpIpLocAddr mandatory This object describes the the Local address of the
IP-datagrams belonging
to the set. If both objects are set to 0.0.0.0 the local
addresses for the datagrams in the set is not s… | column | RFC1155-SMIIpAddress | .1.3.6.1.4.1.272.4.6.9.1.15 |
| x25ToTcpIpLocPort mandatory This object is used for incoming TCP calls. A value
other than -1 specifies the local port number that
is used for matching.
Multiple local ports can be defined to extend the
a… | column | Integer32 | .1.3.6.1.4.1.272.4.6.9.1.17 |
| x25ToTcpIpRemAddr mandatory This object describes together with x25ToTcpIpRemMask the
range of the Remote addresses of the IP-datagrams belonging
to the set. If both objects are set to 0.0.0.0 the local
add… | column | RFC1155-SMIIpAddress | .1.3.6.1.4.1.272.4.6.9.1.19 |
| x25ToTcpDescr mandatory This object contains a textual description of the row. | column | - | .1.3.6.1.4.1.272.4.6.9.1.2 |
| x25ToTcpIpRemMask mandatory This object describes together with x25ToTcpIpRemAddr the
range of the Remote addresses of the IP-datagrams belonging
to the set. If both objects are set to 0.0.0.0 the local
add… | column | RFC1155-SMIIpAddress | .1.3.6.1.4.1.272.4.6.9.1.20 |
| x25ToTcpIpRemPort mandatory This object describes together with x25ToTcpIpRemPortRange the
range of local portnumbers of the IP-datagrams belonging to
the set. All portnumbers between and including the two
o… | column | Integer32 | .1.3.6.1.4.1.272.4.6.9.1.21 |
| x25ToTcpIpRemPortRange mandatory This object describes together with x25ToTcpIpRemPort the
range of local portnumbers of the IP-datagrams belonging to
the set. All portnumbers between and including the two
object… | column | Integer32 | .1.3.6.1.4.1.272.4.6.9.1.22 |
| x25ToTcpClass mandatory | column | Enumeration | .1.3.6.1.4.1.272.4.6.9.1.23 |
| x25ToTcpMetric mandatory Metric to put order on table entries | column | Integer32 | .1.3.6.1.4.1.272.4.6.9.1.25 |
| x25ToTcpDirection mandatory This object describes, if the row its belongs to is
valid in the direction from tcp to x25, x25 to tcp or
both direction. | column | Enumeration | .1.3.6.1.4.1.272.4.6.9.1.26 |
| x25ToTcpPacketizing mandatory This object describes, how x25 packets are encoded on
the IP stream:
none: no packetizing. Packetizing information
is lost.
pos: packetization according… | column | Enumeration | .1.3.6.1.4.1.272.4.6.9.1.27 |
| x25ToTcpReset mandatory This object describes, how the reception of a reset
packet on the X.25 link shall be handled:
clear: the connection will be cleared
accept: the reset will be confirmed and
… | column | Enumeration | .1.3.6.1.4.1.272.4.6.9.1.28 |
| x25ToTcpIntr mandatory Not supported yet!
(This object describes, how the reception of an interrupt
packet on the X.25 link shall be handled:
clear: the connection will be cleared
ignore: the intr … | column | Enumeration | .1.3.6.1.4.1.272.4.6.9.1.29 |
| x25ToTcpState mandatory The State of the MIB row. | column | Enumeration | .1.3.6.1.4.1.272.4.6.9.1.3 |
| x25ToTcpMonitor mandatory If this object is set to on, the row will only be valid
for the direction x25 to tcp, when the IpRemoteAddr is
reachable by ICMP echo packets. Otherwise it is not
used and an alte… | column | Enumeration | .1.3.6.1.4.1.272.4.6.9.1.30 |
| x25ToTcpMonState mandatory This object describes the reachability of the Remote IP
Adress:
not_monitored: the address is not monitored
unreachable: the address is monitored, but does
not reply … | column | Enumeration | .1.3.6.1.4.1.272.4.6.9.1.31 |
| x25ToTcpX25CUDMode mandatory This object specifies the matching direction for the call
user data field. When set to right-to-left, the rightmost
digits of the call user data field are compared against
the x25… | column | Enumeration | .1.3.6.1.4.1.272.4.6.9.1.32 |
| x25ToTcpX25LocAddr mandatory The local X.121 address in the X25 call. If empty, the
local address will not be matched. Extended Adresses are
indicated by a leading '@'. The wildcards '*', '?', '[',
']', '{', … | column | - | .1.3.6.1.4.1.272.4.6.9.1.4 |
| x25ToTcpX25RemAddr mandatory The remote X.121 address in the X25 call. If empty, the
remote address will not be matched. Extended Adresses are
indicated by a leading '@'. The wildcards '*', '?', '[',
']', '{'… | column | - | .1.3.6.1.4.1.272.4.6.9.1.6 |
| x25ToTcpX25RemNSAP mandatory The remote NSAP in the X25 call. If empty, the
local NSAP will not be matched. The NSAP is preceeded
by an 'X' if it is an OSI compatible NSAP or by a 'N' if
the NSAP is in a not … | column | - | .1.3.6.1.4.1.272.4.6.9.1.7 |
| x25ToTcpX25ProtocolId mandatory The protocol id of the X25 call. The protocol id
will not be used for the matching process, when this
object is set to -1 | column | Integer32 | .1.3.6.1.4.1.272.4.6.9.1.8 |
| x25ToTcpX25CallUserData mandatory For outgoing calls, this field contains the Call User Data
field of the outgoing X.25 Call Request packet.
For incoming X.25 calls, the field will be compared against
the first or… | column | OctetString | .1.3.6.1.4.1.272.4.6.9.1.9 |