wlcWlanIfWTPMacAddress
BIANCA-BRICK-WIRELESS-CONTROLLER-MIB ·
.0.61.1.16.1.3
Object
column
SNMPv2-TCMacAddress
wlcWlanIfWTPMacAddress is the first ethernet MAC address of the WTP.
Context
- MIB
- BIANCA-BRICK-WIRELESS-CONTROLLER-MIB
- OID
.0.61.1.16.1.3- Type
- column
- Access
- readonly
- Status
- current
- Parent
- wlcWlanIfEntry
- Table
- wlcWlanIfTable
- Siblings
- 13
Values & Constraints
Type Constraints
range: 6
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| wlcWlanIfIndex Unique index which is incremented for each new WLAN interface entry. | column | Integer32 | .0.61.1.16.1.1 |
| wlcWlanIfTxPower Transmitter output power in dBm. | column | dBm Integer32 | .0.61.1.16.1.10 |
| wlcWlanIfClientScanState This attribute holds the foreground scanning status.
Writing scanning(2) in idle state triggers a new
foreground scan cycle. All entries for this client
interface in the wlcScan… | column | Enumeration | .0.61.1.16.1.11 |
| wlcWlanIfClientIndex Index pointer to the wlcClientProfileTable. | column | Integer32 | .0.61.1.16.1.12 |
| wlcWlanIfHWIndex Index pointer to the wlcWlanHWTable. | column | Integer32 | .0.61.1.16.1.13 |
| wlcWlanIfRadioIndexWTP WLAN interface index on the WTP. | column | Integer32 | .0.61.1.16.1.14 |
| wlcWlanIfWTPIndex The wlcWlanIfWTPIndex is the uniqe WTP index
see wlcWTPIndex. | column | Integer32 | .0.61.1.16.1.2 |
| wlcWlanIfProfIndex The wlcWlanIfProfIndex is the configured WLAN interface profile.
See wlcWlanIfProfileIndex. | column | Integer32 | .0.61.1.16.1.4 |
| wlcWlanIfType The current WLAN physical interface type for the WTP
off(1) interface disabled
access-point(2) access point
client(3) client mode
default(4) the type of the corresponding wlcW… | column | Enumeration | .0.61.1.16.1.5 |
| wlcWlanIfChannel The physical channel. | column | Integer32 | .0.61.1.16.1.6 |
| wlcWlanIfAutoSelectedChannel The auto selected channel. | column | Integer32 | .0.61.1.16.1.7 |
| wlcWlanIfSecondaryChannel The wlcWlanIfSecondaryChannel describes
if the secondary channel (40Mhz bandwidth) is below(1) or above(2)
of the current selected channel. | column | Enumeration | .0.61.1.16.1.8 |
| wlcWlanIfAutoSecondaryChannel The wlcWlanIfAutoSecondaryChannel describes
if the secondary channel (40Mhz bandwidth) is below(1) or above(2)
of the auto selected channel. | column | Enumeration | .0.61.1.16.1.9 |