wlcWlanIfType – BIANCA-BRICK-WIRELESS-CONTROLLER-MIB

Object

column r/w Enumeration

The current WLAN physical interface type for the WTP
off(1)		 interface disabled
access-point(2) access point
client(3)	 client mode
default(4)	 the type of the corresponding wlcWlanIfProfile
delete(32)      delete

Context

MIB: BIANCA-BRICK-WIRELESS-CONTROLLER-MIB
OID: .0.61.1.16.1.5
Type: column
Access: readwrite
Status: current
Parent: wlcWlanIfEntry
Table: wlcWlanIfTable
Siblings: 13

Syntax

Enumeration

Values & Constraints

Enumerated Values

`1`	off
`2`	access-point
`3`	client
`7`	default
`32`	delete

Related Objects

Sibling Objects

Object	Type	Syntax	OID
wlcWlanIfIndex Unique index which is incremented for each new WLAN interface entry.	column	Integer32	`.0.61.1.16.1.1`
wlcWlanIfTxPower Transmitter output power in dBm.	column	dBm Integer32	`.0.61.1.16.1.10`
wlcWlanIfClientScanState This attribute holds the foreground scanning status. Writing scanning(2) in idle state triggers a new foreground scan cycle. All entries for this client interface in the wlcScan…	column	Enumeration	`.0.61.1.16.1.11`
wlcWlanIfClientIndex Index pointer to the wlcClientProfileTable.	column	Integer32	`.0.61.1.16.1.12`
wlcWlanIfHWIndex Index pointer to the wlcWlanHWTable.	column	Integer32	`.0.61.1.16.1.13`
wlcWlanIfRadioIndexWTP WLAN interface index on the WTP.	column	Integer32	`.0.61.1.16.1.14`
wlcWlanIfWTPIndex The wlcWlanIfWTPIndex is the uniqe WTP index see wlcWTPIndex.	column	Integer32	`.0.61.1.16.1.2`
wlcWlanIfWTPMacAddress wlcWlanIfWTPMacAddress is the first ethernet MAC address of the WTP.	column	SNMPv2-TCMacAddress	`.0.61.1.16.1.3`
wlcWlanIfProfIndex The wlcWlanIfProfIndex is the configured WLAN interface profile. See wlcWlanIfProfileIndex.	column	Integer32	`.0.61.1.16.1.4`
wlcWlanIfChannel The physical channel.	column	Integer32	`.0.61.1.16.1.6`
wlcWlanIfAutoSelectedChannel The auto selected channel.	column	Integer32	`.0.61.1.16.1.7`
wlcWlanIfSecondaryChannel The wlcWlanIfSecondaryChannel describes if the secondary channel (40Mhz bandwidth) is below(1) or above(2) of the current selected channel.	column	Enumeration	`.0.61.1.16.1.8`
wlcWlanIfAutoSecondaryChannel The wlcWlanIfAutoSecondaryChannel describes if the secondary channel (40Mhz bandwidth) is below(1) or above(2) of the auto selected channel.	column	Enumeration	`.0.61.1.16.1.9`