wlcWlanIfProfileSkipChannels5GHz
BIANCA-BRICK-WIRELESS-CONTROLLER-MIB ·
.0.61.1.17.1.7
Object
column
r/w
Bits
If a bit is set the accordingly channel will be skipped from the channel scan list (channel 36-173 for 5 GHz). Default is to scan all channels (i.e. no bit is set).
Context
- MIB
- BIANCA-BRICK-WIRELESS-CONTROLLER-MIB
- OID
.0.61.1.17.1.7- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- wlcWlanIfProfileEntry
- Table
- wlcWlanIfProfileTable
- Siblings
- 24
Syntax
Bits
Values & Constraints
Enumerated Values
0 | channel-36 |
1 | channel-40 |
2 | channel-44 |
3 | channel-48 |
4 | channel-52 |
5 | channel-56 |
6 | channel-60 |
7 | channel-64 |
8 | channel-100 |
9 | channel-104 |
10 | channel-108 |
11 | channel-112 |
12 | channel-116 |
13 | channel-120 |
14 | channel-124 |
15 | channel-128 |
16 | channel-132 |
17 | channel-136 |
18 | channel-140 |
19 | channel-149 |
20 | channel-153 |
21 | channel-157 |
23 | channel-161 |
24 | channel-165 |
25 | channel-169 |
26 | channel-173 |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| wlcWlanIfProfileIndex Unique index of a WIFI interface profile. | column | Integer32 | .0.61.1.17.1.1 |
| wlcWlanIfProfileBurst Sending wireless frames without backoff time. | column | Enumeration | .0.61.1.17.1.10 |
| wlcWlanIfProfileCountry This attribute identifies the country in which the station is operating.
The first two octets of this string are the two character country code as
described in document ISO/IEC 31… | column | OctetString | .0.61.1.17.1.11 |
| wlcWlanIfProfileBand Frequency band. 'b24-GHz' -> 2.4 GHz band, 'b5-GHz' -> 5 GHz band,
'b58-GHz' -> 5.8 GHz band, 'b24-5-GHz' -> 2.4 GHz and 5 GHz band. | column | Enumeration | .0.61.1.17.1.12 |
| wlcWlanIfProfileAckWindow Additional 802.11 ACK timeout in microseconds.
This must be set to non-zero value for radio distances
larger than about 700m.
Recommended setting is about 10 microseconds per kil… | column | milliseconds Integer32 | .0.61.1.17.1.13 |
| wlcWlanIfProfileBeaconPeriod This attribute contains the number of TU that this
BSS uses for scheduling Beacon transmissions. | column | Integer32 | .0.61.1.17.1.14 |
| wlcWlanIfProfileDTIMPeriod The number of DTIM intervals between
the start of CFPs for this BSS. | column | Integer32 | .0.61.1.17.1.15 |
| wlcWlanIfProfileSpatialStreams This attribute indicates the maximum number of spatial
streams enabled. The default value of this attribute is 3. | column | Integer32 | .0.61.1.17.1.16 |
| wlcWlanIfProfileGreenfield This attribute, when TRUE, indicates that the HT Greenfield
option is enabled. The default value of this attribute is FALSE. | column | SNMPv2-TCTruthValue | .0.61.1.17.1.17 |
| wlcWlanIfProfileShortGI This attribute, when TRUE, indicates that the Short Guard
option is enabled for 40 MHz operation. The default value of this attribute
is FALSE. | column | SNMPv2-TCTruthValue | .0.61.1.17.1.18 |
| wlcWlanIfProfileRxSTBC This attribute, when TRUE, indicates that the entity's
capability of receiving frames that are sent using the Space-Time Block Code
(STBC) is enabled. The default value of this at… | column | SNMPv2-TCTruthValue | .0.61.1.17.1.19 |
| wlcWlanIfProfileName The name of the requested profile. | column | SNMPv2-TCDisplayString | .0.61.1.17.1.2 |
| wlcWlanIfProfileTxSTBC This attribute, when TRUE, indicates that the entity's
capability of transmitting frames using Space-Time Block Code (STBC) option
is enabled. The default value of this attribute … | column | SNMPv2-TCTruthValue | .0.61.1.17.1.20 |
| wlcWlanIfProfileFortyMHzOperation This attribute, when TRUE, indicates that the 40 MHz
Operation is enabled. The default value of this attribute is FALSE. | column | SNMPv2-TCTruthValue | .0.61.1.17.1.21 |
| wlcWlanIfProfileShortRetry This attribute shall indicate the maximum number of
transmission attempts of a frame, the length of which is less
than or equal to dot11RTSThreshold, that shall be made before a
f… | column | Integer32 | .0.61.1.17.1.22 |
| wlcWlanIfProfileLongRetry This attribute shall indicate the maximum number of
transmission attempts of a frame, the length of which is
greater than dot11RTSThreshold, that shall be made before a
failure co… | column | Integer32 | .0.61.1.17.1.23 |
| wlcWlanIfProfileBgScanning Enable/disable background-scanning. | column | Enumeration | .0.61.1.17.1.24 |
| wlcWlanIfProfileAirtimeFairness If AirtimeFairness is enabled(1), background or best-effort traffic
sent from AP to STA is fairly scheduled among all stations
associated to this radio profile, in respect of airt… | column | Enumeration | .0.61.1.17.1.25 |
| wlcWlanIfProfileType The WLAN physical interface type:
off(1) interface disabled
access-point(2) access point
client(3) client mode
delete(32) delete | column | Enumeration | .0.61.1.17.1.3 |
| wlcWlanIfProfileMode Mixed and compatibility modes between various 802.11 substandards. | column | Enumeration | .0.61.1.17.1.4 |
| wlcWlanIfProfileSpeed The value defines the bitrate or the coding scheme to use for data frames.
Default value auto(31) enables automatic rate adaption. | column | Enumeration | .0.61.1.17.1.5 |
| wlcWlanIfProfileSkipChannels24GHz If a bit is set the according channel will be skipped from
the channel scan list (channel 1-14 for 2.4 GHz).
Default is to scan all channels (i.e. no bit is set). | column | Bits | .0.61.1.17.1.6 |
| wlcWlanIfProfileRtsThreshold This attribute shall indicate the number of octets in an
MPDU, below which an RTS/CTS handshake shall not be
performed, except as RTS/CTS is used as a cross modulation
protection … | column | Integer32 | .0.61.1.17.1.8 |
| wlcWlanIfProfileFragmentationThreshold This attribute shall specify the current maximum size, in
octets, of the PSDU that may be delivered to the PHY.
This maximum size does not apply in the case of A-MPDU. An
MSDU, A-… | column | Integer32 | .0.61.1.17.1.9 |