wlcAuthEapolProfileAuthPeriod
BIANCA-BRICK-WIRELESS-CONTROLLER-MIB ·
.0.61.1.8.1.8
Object
column
r/w
Integer32
The time after a disassociation/deauthentication should be committed by the client if there is no EAPOL Message from authenticator. Time can be changed in steps of 1 seconds.
Context
- MIB
- BIANCA-BRICK-WIRELESS-CONTROLLER-MIB
- OID
.0.61.1.8.1.8- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- wlcAuthEapolProfileEntry
- Table
- wlcAuthEapolProfileTable
- Siblings
- 14
Syntax
Integer32
- Source
- COPS-PR-SPPIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| wlcAuthEapolProfileIndex Unique index of a auth eapol profile. | column | Integer32 | .0.61.1.8.1.1 |
| wlcAuthEapolProfileTxPeriod A period used by the authenticator PAE state machine
to determine when an EAPOL PDU is to be transmitted.
Time can be changed in steps of 1 seconds.
Default value is 30 seconds. | column | s Integer32 | .0.61.1.8.1.10 |
| wlcAuthEapolProfileSuppTimeout A timeout used by the backend authentication state machine
in order to determine timeout conditions in the exchanges
between the authenticator and the supplicant.
Time can be ch… | column | s Integer32 | .0.61.1.8.1.11 |
| wlcAuthEapolProfileReAuthPeriod A period used by the reauthentication timer state machine
to determine when reauthentication of the supplicant takes place.
Time can be changed in steps of 1 seconds.
Default val… | column | s Integer32 | .0.61.1.8.1.12 |
| wlcAuthEapolProfileReAuthEnabled The state variable reAuthEnabled controls
whether periodic reauthentication takes place.
Default value is false. | column | SNMPv2-TCTruthValue | .0.61.1.8.1.13 |
| wlcAuthEapolProfileMaxReq The maximum number of times that the state machine will
retransmit an EAP Request packet to the supplicant before
it times out the authentication session.
Default value is 2. | column | Integer32 | .0.61.1.8.1.14 |
| wlcAuthEapolProfileKeyTxEnabled The EAPOL protocol optionally supports the transmission
of global key information from the Authenticator to the
Supplicant, following a successful authentication exchange,
in ci… | column | SNMPv2-TCTruthValue | .0.61.1.8.1.15 |
| wlcAuthEapolProfileAdminStatus Enable or delete the requested auth eapol profile. | column | Enumeration | .0.61.1.8.1.2 |
| wlcAuthEapolProfilePTK1Timeout The time after which the first EAPOL-key Message in the pairwise
temporal key negotiation phase (PTK1) is retransmitted if
there is no reply from supplicant.
Time can be changed … | column | milliseconds Integer32 | .0.61.1.8.1.3 |
| wlcAuthEapolProfilePTK3Timeout The time after which the third EAPOL-key Message in the pairwise
temporal key negotiation phase (PTK3) is retransmitted if
there is no reply from supplicant.
Time can be changed … | column | milliseconds Integer32 | .0.61.1.8.1.4 |
| wlcAuthEapolProfileGTKTimeout The time after which the first EAPOL-key Message in the group
temporal key negotiation phase (GTK) is retransmitted if
there is no reply from supplicant.
Time can be changed in s… | column | milliseconds Integer32 | .0.61.1.8.1.5 |
| wlcAuthEapolProfilePairwiseUpdateCount The number of times EAPOL Message 1 and Message 3 in the
pairwise temporal key negotiation phase (PTK) will be
retried. | column | Integer32 | .0.61.1.8.1.6 |
| wlcAuthEapolProfileGroupUpdateCount The number of times Message 1 in the group temporal key
negotiation phase (GTK) will be retried. | column | Integer32 | .0.61.1.8.1.7 |
| wlcAuthEapolProfileQuietPeriod Period of time during which the authenticator will
not attempt to acquire a supplicant.
Time can be changed in steps of 1 seconds.
Default value is 60 seconds. | column | s Integer32 | .0.61.1.8.1.9 |