radiusSrvGroupDescr

BIANCA-BRICK-RADIUS-MIB · .1.3.6.1.4.1.272.254.8.1.1.29
MIB view Table view

Object

column mandatory r/w OctetString 
Description for the logical group of RADIUS servers
that is identified by radiuSrvGroupId.

Context

MIB
BIANCA-BRICK-RADIUS-MIB
OID
.1.3.6.1.4.1.272.254.8.1.1.29
Type
column
Access
readwrite
Status
mandatory
Parent
radiusServerEntry
Table
radiusServerTable
Siblings
29

Syntax

OctetString

Values & Constraints

Object Constraints
range: 0-20

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
radiusSrvProtocol mandatory
Type of authentication server. To configure the radius authentication use authentication(1), for radius accounting accounting(2), for user authentication on login shell login(3), …
columnEnumeration.1.3.6.1.4.1.272.254.8.1.1.1
radiusSrvValidate mandatory
This additional option is only used for bogus RADIUS servers, which send response messages with a wrong calculated MD5 checksum. All messages generated by the brick, however, will…
columnEnumeration.1.3.6.1.4.1.272.254.8.1.1.10
radiusSrvDialout mandatory
This option provides a means for RADIUS dialout configuration. When set to enabled(1), routing information is read into the brick after system startup. This information must be co…
columnEnumeration.1.3.6.1.4.1.272.254.8.1.1.11
radiusSrvDefaultPW mandatory
This is the default USER-PASSWORD the brick sends where no password is available (for example, in requests for the calling number or boot requests). Some RADIUS servers rely on a …
column-.1.3.6.1.4.1.272.254.8.1.1.12
radiusSrvReloadInterval mandatory
Reload interval for RADIUS dialout configuration in minutes. The default is 0 (no reload is performed automatically.
columnInteger32.1.3.6.1.4.1.272.254.8.1.1.13
radiusSrvAuthRequests mandatory
Total number of access requests sent.
columnRFC1155-SMICounter.1.3.6.1.4.1.272.254.8.1.1.14
radiusSrvAuthAccepts mandatory
Total number of access accepts received.
columnRFC1155-SMICounter.1.3.6.1.4.1.272.254.8.1.1.15
radiusSrvAuthRejects mandatory
Total number of access rejects received.
columnRFC1155-SMICounter.1.3.6.1.4.1.272.254.8.1.1.16
radiusSrvAuthReqRetrans mandatory
Total number of retransmitted access requests.
columnRFC1155-SMICounter.1.3.6.1.4.1.272.254.8.1.1.17
radiusSrvAuthReqFailed mandatory
Total number of failed (not rejected) access requests.
columnRFC1155-SMICounter.1.3.6.1.4.1.272.254.8.1.1.18
radiusSrvAuthReqPending mandatory
Total number of pending access requests.
columnRFC1155-SMICounter.1.3.6.1.4.1.272.254.8.1.1.19
radiusSrvAddress mandatory
The Radius Server IP Address.
columnRFC1155-SMIIpAddress.1.3.6.1.4.1.272.254.8.1.1.2
radiusSrvAcctStarts mandatory
Total number of accounting starts sent.
columnRFC1155-SMICounter.1.3.6.1.4.1.272.254.8.1.1.20
radiusSrvAcctStops mandatory
Total number of accounting stops sent.
columnRFC1155-SMICounter.1.3.6.1.4.1.272.254.8.1.1.21
radiusSrvKeepalive mandatory
Enables the periodicaly keep alive check of 'inactive' (see radiusSrvState) server.
columnEnumeration.1.3.6.1.4.1.272.254.8.1.1.22
radiusSrvGroupId mandatory
ID for creating logical groups of RADIUS servers to be addressed for RADIUS ACCESS and ACCOUNTING requests. Note: the priority within a defined group is still determined by radius…
columnInteger32.1.3.6.1.4.1.272.254.8.1.1.23
radiusSrvNasLocation mandatory
Description of the NAS location - to be used for accounting in some vendor-specific modes (see radiusSrvVendorMode).
column-.1.3.6.1.4.1.272.254.8.1.1.24
radiusSrvVendorMode mandatory
Vendor-specific NAS emulation needed for dedicated customer projects.
columnEnumeration.1.3.6.1.4.1.272.254.8.1.1.25
radiusSrvAcctOns mandatory
Total number of accounting 'ON' messages sent.
columnRFC1155-SMICounter.1.3.6.1.4.1.272.254.8.1.1.26
radiusSrvAcctOffs mandatory
Total number of accounting 'OFF' messages sent.
columnRFC1155-SMICounter.1.3.6.1.4.1.272.254.8.1.1.27
radiusSrvAcctResponses mandatory
Total number of received accounting response messages.
columnRFC1155-SMICounter.1.3.6.1.4.1.272.254.8.1.1.28
radiusSrvPort mandatory
The radius server port. Please notice that RFC2138 assigns port 1812 and 1813 for authentication and accounting, respectively. Many Radius servers still use the former assigned po…
columnInteger32.1.3.6.1.4.1.272.254.8.1.1.3
radiusSrvNasOspfAreaId mandatory
OSPF area ID to be used for all temporarily created WAN interfaces associated with this NAS location and RADIUS server context.
columnRFC1155-SMIIpAddress.1.3.6.1.4.1.272.254.8.1.1.30
radiusSrvSecret mandatory
The shared secret between radius server and Brick.
column-.1.3.6.1.4.1.272.254.8.1.1.4
radiusSrvPriority mandatory
The radius server with the lowest priority is the first used for request. If there is no response (see also the values Timeout and Retries) the radius server with the next lowest …
columnInteger32.1.3.6.1.4.1.272.254.8.1.1.5
radiusSrvTimeout mandatory
The amount of milliseconds (1/1000s) waiting for an outstanding request. Default is 1000 (1 second).
columnInteger32.1.3.6.1.4.1.272.254.8.1.1.6
radiusSrvRetries mandatory
The number of retries sent for each request, until the server state is set to inactive. Default value is 1. To prevent the radiusSrvState ever switch to inactive, set this value t…
columnInteger32.1.3.6.1.4.1.272.254.8.1.1.7
radiusSrvState mandatory
When operational, the server state is active(1). If the radius server does not respond, its state is set to inactive(2). The administrator can set the state manually to disabled(3…
columnEnumeration.1.3.6.1.4.1.272.254.8.1.1.8
radiusSrvPolicy mandatory
If set to authoritative(1), a negative answer to a request will be accepted. This is not necessarily true when set to non-authoritative(2), where the next radius server will be as…
columnEnumeration.1.3.6.1.4.1.272.254.8.1.1.9