biboPPPDNSNegotiation

BIANCA-BRICK-PPP-MIB · .1.3.6.1.4.1.272.4.3.1.1.25
MIB view Table view

Object

column mandatory r/w Enumeration 
The IP control protocol extensions as described in
RFC 1877 has a means of negotiating primary and
secondary Domain Name System (DNS) server addresses.
              
When this option is disabled(1), no DNS negotiation
will be performed.
If enabled(2), DNS negotiation behavier depends on
biboPPPIpAddress switch (client or server mode).
Setting to dynamic-client(3), the remote system is asked
to tell us the IP-address(es) of primary and/or secondary
DNS. In dynamic-client-with-wins mode it is also asked for
the IP-addresses of the primary and secondary WINS.
Setting to dynamic_server(4), primary and/or secondary
DNS IP-address(es) found in ipDynAdddrPoolDnsServer1 and
ipDynAddrPoolDnsServer2 (or if empty biboAdmNameServer 
and/or biboAdmNameServ2), if asked, will be send to remote.

Context

MIB
BIANCA-BRICK-PPP-MIB
OID
.1.3.6.1.4.1.272.4.3.1.1.25
Type
column
Access
readwrite
Status
mandatory
Parent
biboPPPEntry
Table
biboPPPTable
Siblings
31

Syntax

Enumeration

Values & Constraints

Enumerated Values
1disabled
2enabled
3dynamic-client
4dynamic-server
5dynamic-client-with-wins

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
biboPPPIfIndex mandatory
Correlating PPP interface index. This value is assigned automatically by the system.
columnInteger32.1.3.6.1.4.1.272.4.3.1.1.1
biboPPPIpAddress mandatory
The IP control protocol as described in RFC1332 has a means of negotiating IP-addresses. When this option is set to dynamic-server(2), an available IP-address found in biboPPPIpAd…
columnEnumeration.1.3.6.1.4.1.272.4.3.1.1.10
biboPPPRetryTime mandatory
Time in seconds to wait before retrying an ISDN call or PPTP control connection. This value is also used as timeout for the delayed callback (see biboPPPCallback_de…
columnInteger32.1.3.6.1.4.1.272.4.3.1.1.11
biboPPPBlockTime mandatory
Time in seconds to wait after a connection failure (e.g. the number of biboPPPMaxRetries calls failed). When set to zero, the interface state is never set to blocked.
columnInteger32.1.3.6.1.4.1.272.4.3.1.1.12
biboPPPMaxRetries mandatory
The number of dialup retries before changing to the blocked state.
columnInteger32.1.3.6.1.4.1.272.4.3.1.1.13
biboPPPShortHold mandatory
The time in seconds to wait, once the channel is silent, (that is, no data is being received or transmitted) before terminating the link. When set to zero the short hold mode is d…
columnInteger32.1.3.6.1.4.1.272.4.3.1.1.14
biboPPPInitConn mandatory
The number of channels to initially set up for this interface.
columnInteger32.1.3.6.1.4.1.272.4.3.1.1.15
biboPPPMaxConn mandatory
The maximum number of channels bundled for this interface.
columnInteger32.1.3.6.1.4.1.272.4.3.1.1.16
biboPPPMinConn mandatory
The minimum number of channels bundled for this interface.
columnInteger32.1.3.6.1.4.1.272.4.3.1.1.17
biboPPPCallback mandatory
If this object is enabled(1), and the call is recognized by the dialed number then calls are never accepted, and a callback is forced for incoming calls at once. The callback can …
columnEnumeration.1.3.6.1.4.1.272.4.3.1.1.18
biboPPPLayer1Protocol mandatory
This entry is used to select the layer 1 protocol settings for this partner. Normally the correct entry is hdlc-64.
columnEnumeration.1.3.6.1.4.1.272.4.3.1.1.19
biboPPPType mandatory
The type of the PPP multiprotocol interface. A new dialup interface is created when this field is set to the value isdn-dialup(1), isdn-dialin-only(3) or multiuser(5). …
columnEnumeration.1.3.6.1.4.1.272.4.3.1.1.2
biboPPPLoginString mandatory
A textual string containing a login sequence (script) composed of fields in the format [expect send], comparable to chat scripts commonly used on other sytems. This script is req…
columnOctetString.1.3.6.1.4.1.272.4.3.1.1.20
biboPPPVJHeaderComp mandatory
This entry is used to enable Van Jacobsen TCP/IP header compression, which reduces the size of TCP/IP packet headers and increases the efficiency of line utilization.
columnEnumeration.1.3.6.1.4.1.272.4.3.1.1.21
biboPPPLayer2Mode mandatory
This object specifies the layer 2 mode to be used for a connection. It is only relevant, if the Encapsulation involves an LAPB protocol. This is the case for x25, x25-ppp, ip-lap…
columnEnumeration.1.3.6.1.4.1.272.4.3.1.1.22
biboPPPDynShortHold mandatory
Optimizes idle time disconnects depending on the charging information received during the connection. This value specifies the minimum inactivity time (channel is silent) in perce…
columnInteger32.1.3.6.1.4.1.272.4.3.1.1.23
biboPPPLocalIdent mandatory
This is the local identification string used for PPP authentication(PAP/CHAP/MS-CHAP).
columnOctetString.1.3.6.1.4.1.272.4.3.1.1.24
biboPPPEncryption mandatory
This field specifies the data encryption scheme for en(de)crypting PPP encapsulated multi-protocol datagrams. Setting to mppe-40(2), mppe-128(3) or mppe-56(7) the Microsoft Point…
columnEnumeration.1.3.6.1.4.1.272.4.3.1.1.26
biboPPPLQMonitoring mandatory
This parameter enables (2) or disables (1) PPP Link Quality Monitoring (LQM) according RFC 1989. When set to on(2) LQM is added to the list of parameters used in LCP negotiation. …
columnEnumeration.1.3.6.1.4.1.272.4.3.1.1.27
biboPPPIpPoolId mandatory
Pool ID value to select an IP address pool for dynamic IP address assignment via IPCP. See also PPPIpPoolTable for further details.
columnInteger32.1.3.6.1.4.1.272.4.3.1.1.28
biboPPPSessionTimeout mandatory
Maximum number of seconds before termination the established PPP session, regardless there is any data throughput on the corresponding link(s). When set to 0, there no limit for t…
columnInteger32.1.3.6.1.4.1.272.4.3.1.1.29
biboPPPEncapsulation mandatory
The layer 2 encapsulation of the link. The use of ppp(1) as described in RFC 1661 is the preferred encapsulation for point-to-point links. The encapsulation is set to x25(2) for…
columnEnumeration.1.3.6.1.4.1.272.4.3.1.1.3
biboPPPLayer1DiscDelay mandatory
This parameter specifies wether the link (layer 1) should be disconnected immediately (after receiving a layer 2 disconnect) or delayed (after expiration of biboPPPShortHold secon…
columnEnumeration.1.3.6.1.4.1.272.4.3.1.1.30
biboPPPAuthDomain mandatory
The authentication domain, which is used for authenticating via MS-CHAP with enabled DomainName.
columnOctetString.1.3.6.1.4.1.272.4.3.1.1.31
biboPPPAliveCheck mandatory
When set to enabled(1), LCP Echo Request (in case of encapsulation PPP) or Cisco-HDLC keepalive messages (in case of encapsulation cisco-hdlc) are sent in regular intervals durin…
columnEnumeration.1.3.6.1.4.1.272.4.3.1.1.32
biboPPPKeepalive obsolete
When set to on(1), keepalive packets are sent in regular intervals during the connection. Keepalive packets can not be sent using the ip-lapb or x25 encapsulation.
columnEnumeration.1.3.6.1.4.1.272.4.3.1.1.4
biboPPPTimeout mandatory
The number of milliseconds waiting before retransmitting a PPP configure packet.
columnInteger32.1.3.6.1.4.1.272.4.3.1.1.5
biboPPPCompression mandatory
The throughput can be enhanced up to factor three using the V42bis compression method or the Stac LZS compression algorithm. V42bis is currently supported with the ip-lapb and mpr…
columnEnumeration.1.3.6.1.4.1.272.4.3.1.1.6
biboPPPAuthentication mandatory
The type of authentication used on the point-to-point link as described in RFC 1334. The authentication protocol supports pap(2) (Password Authentication Protocol), chap(3) (Chall…
columnEnumeration.1.3.6.1.4.1.272.4.3.1.1.7
biboPPPAuthIdent mandatory
The remote authentication identification string. The local authentication identification string is taken from the contents of the variable biboPPPLocalIdent.
columnOctetString.1.3.6.1.4.1.272.4.3.1.1.8
biboPPPAuthSecret mandatory
The authentication secret, which is used symmetrically for both local and remote sides of the PPP link.
columnOctetString.1.3.6.1.4.1.272.4.3.1.1.9