l2tpTunnelSessionDataSequencing
BIANCA-BRICK-L2TP-MIB ·
.1.3.6.1.4.1.272.4.23.8.30.10.130
Object
column
mandatory
r/w
Enumeration
This object specifies if sequence numbers are used on the data channel of sessions supported by this tunnel.
Context
- MIB
- BIANCA-BRICK-L2TP-MIB
- OID
.1.3.6.1.4.1.272.4.23.8.30.10.130- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- l2tpTunnelEntry
- Table
- l2tpTunnelTable
- Siblings
- 17
Syntax
Enumeration
Values & Constraints
Enumerated Values
2 | disabled |
3 | enabled |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| l2tpTunnelRemoteIpAddress mandatory The remote IP address for the tunnel. | column | RFC1155-SMIIpAddress | .1.3.6.1.4.1.272.4.23.8.30.10.10 |
| l2tpTunnelPassword mandatory The password used for tunnel authentication. | column | OctetString | .1.3.6.1.4.1.272.4.23.8.30.10.100 |
| l2tpTunnelHelloInterval mandatory The interval in seconds between two consecutive hello
requests sent by L2TP during the tunnel life. If this
object is set to 0 (zero), no hello requests are sent
by L2TP on thi… | column | Integer32 | .1.3.6.1.4.1.272.4.23.8.30.10.120 |
| l2tpTunnelMinRetryTime mandatory The initial interval in seconds between two consecutive
attempts to send an L2TP control packet. The value of
this interval is doubled with each new attempt, until
the maximum … | column | Integer32 | .1.3.6.1.4.1.272.4.23.8.30.10.140 |
| l2tpTunnelMaxRetryTime mandatory The maximum interval in seconds between two consecutive
attempts to send an L2TP control packet. | column | Integer32 | .1.3.6.1.4.1.272.4.23.8.30.10.150 |
| l2tpTunnelMaxRetries mandatory The maximum number of retries to send an L2TP control
packet. The total number of attempts will be one more
than this value. | column | Integer32 | .1.3.6.1.4.1.272.4.23.8.30.10.160 |
| l2tpTunnelState mandatory The current state of the tunnel as specified in
RFC2661. Selecting shutdown(5) value results in tunnel
hangup. Any other value is ignored. | column | Enumeration | .1.3.6.1.4.1.272.4.23.8.30.10.170 |
| l2tpTunnelRemoteUdpPort mandatory The remote UDP port number for the tunnel. | column | Integer32 | .1.3.6.1.4.1.272.4.23.8.30.10.20 |
| l2tpTunnelRemoteTunnelId mandatory The ID used by the remote end for the tunnel. | column | Integer32 | .1.3.6.1.4.1.272.4.23.8.30.10.30 |
| l2tpTunnelRemoteReceiveWindowSize mandatory The receive window size used by L2TP on the remote
side of this tunnel. | column | Integer32 | .1.3.6.1.4.1.272.4.23.8.30.10.35 |
| l2tpTunnelRemoteHostname mandatory The name of the remote host. | column | OctetString | .1.3.6.1.4.1.272.4.23.8.30.10.40 |
| l2tpTunnelRemoteVendorName mandatory The vendor name of the remote host L2TP layer. | column | OctetString | .1.3.6.1.4.1.272.4.23.8.30.10.50 |
| l2tpTunnelLocalIpAddress mandatory The local IP address for the tunnel. | column | RFC1155-SMIIpAddress | .1.3.6.1.4.1.272.4.23.8.30.10.60 |
| l2tpTunnelLocalUdpPort mandatory The local UDP port number for the tunnel. | column | Integer32 | .1.3.6.1.4.1.272.4.23.8.30.10.70 |
| l2tpTunnelLocalTunnelId mandatory The ID used by the local end for the tunnel. | column | Integer32 | .1.3.6.1.4.1.272.4.23.8.30.10.80 |
| l2tpTunnelLocalReceiveWindowSize mandatory The receive window size used by L2TP on the local
side of this tunnel. Currently, the only supported
value is 1. | column | Integer32 | .1.3.6.1.4.1.272.4.23.8.30.10.85 |
| l2tpTunnelLocalHostname mandatory The name of the local host. | column | OctetString | .1.3.6.1.4.1.272.4.23.8.30.10.90 |