l2tpTunnelProfileSessionDataSequencing

BIANCA-BRICK-L2TP-MIB · .1.3.6.1.4.1.272.4.23.8.20.10.110
MIB view Table view

Object

column mandatory r/w Enumeration 
This object specifies if sequence numbers are used on
the data channel of sessions supported by this tunnel.
Additionally, if this object is set to delete (1), the
entry is marked for discard.

Context

MIB
BIANCA-BRICK-L2TP-MIB
OID
.1.3.6.1.4.1.272.4.23.8.20.10.110
Type
column
Access
readwrite
Status
mandatory
Parent
l2tpTunnelProfileEntry
Table
l2tpTunnelProfileTable
Siblings
17

Syntax

Enumeration

Values & Constraints

Enumerated Values
1delete
2disabled
3enabled

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
l2tpTunnelProfileIndex mandatory
The unique index for this entry.
columnInteger32.1.3.6.1.4.1.272.4.23.8.20.10.10
l2tpTunnelProfileHelloInterval mandatory
The interval in seconds between two consecutive hello requests sent by L2TP during the tunnel life. If this object is set to 0 (zero), no hello requests are sent by L2TP on thi…
columnInteger32.1.3.6.1.4.1.272.4.23.8.20.10.100
l2tpTunnelProfileMinRetryTime mandatory
The initial interval in seconds between two consecutive attempts to send an L2TP control packet. The value of this interval is doubled with each new attempt, until the maximum …
columnInteger32.1.3.6.1.4.1.272.4.23.8.20.10.120
l2tpTunnelProfileMaxRetryTime mandatory
The maximum interval in seconds between two consecutive attempts to send an L2TP control packet.
columnInteger32.1.3.6.1.4.1.272.4.23.8.20.10.130
l2tpTunnelProfileMaxRetries mandatory
The maximum number of retries to send an L2TP control packet. The total number of attempts will be one more than this value.
columnInteger32.1.3.6.1.4.1.272.4.23.8.20.10.140
l2tpTunnelProfileName mandatory
The friendly name for this entry.
columnOctetString.1.3.6.1.4.1.272.4.23.8.20.10.15
l2tpTunnelProfileRadiusAssignment mandatory
This object enables/disables the use of Radius for requesting main and backup remote IP addresses. Only meaningful in LAC mode.
columnEnumeration.1.3.6.1.4.1.272.4.23.8.20.10.150
l2tpTunnelProfileRadiusGroupId mandatory
Determines the logical RADIUS server group to be addressed for sending the RADIUS Access-Request messages. Only meaningful in LAC mode. See also radiusSrvGroupId.
columnInteger32.1.3.6.1.4.1.272.4.23.8.20.10.160
l2tpTunnelProfileRemoteIpAddress mandatory
The main remote IP address for the tunnel. Only meaningful in LAC mode. If l2tpTunnelProfileRadiusAssignment is set to 'enabled', this object is ignored and the L2TP daemon will…
columnRFC1155-SMIIpAddress.1.3.6.1.4.1.272.4.23.8.20.10.20
l2tpTunnelProfileRemoteIpAddressBackup mandatory
The backup remote IP address for the tunnel. Only meaningful in LAC mode. If l2tpTunnelProfileRadiusAssignment is set to 'enabled', this object is ignored and the L2TP daemon wi…
columnRFC1155-SMIIpAddress.1.3.6.1.4.1.272.4.23.8.20.10.25
l2tpTunnelProfileRemoteUdpPort mandatory
The remote UDP port number for the tunnel. Only meaningful in LAC mode.
columnInteger32.1.3.6.1.4.1.272.4.23.8.20.10.30
l2tpTunnelProfileRemoteHostname mandatory
The name of the remote host. Use an empty string for default profile.
columnOctetString.1.3.6.1.4.1.272.4.23.8.20.10.40
l2tpTunnelProfileLocalIpAddress mandatory
The local IP address for the tunnel. If this value is set to 0, the IP address of the egress interface will be used in outgoing L2TP packets.
columnRFC1155-SMIIpAddress.1.3.6.1.4.1.272.4.23.8.20.10.50
l2tpTunnelProfileLocalUdpPort mandatory
The local UDP port number for the tunnel. Only meaningful in LAC mode. If this value is set to 0 (zero), the port number is allocated dynamically.
columnInteger32.1.3.6.1.4.1.272.4.23.8.20.10.60
l2tpTunnelProfileLocalHostname mandatory
The name of the local host.
columnOctetString.1.3.6.1.4.1.272.4.23.8.20.10.70
l2tpTunnelProfilePassword mandatory
The password used for tunnel authentication.
columnOctetString.1.3.6.1.4.1.272.4.23.8.20.10.80
l2tpTunnelProfileReceiveWindowSize mandatory
The received window size used by L2TP on the local side of this tunnel. Currently, the only supported value is 1.
columnInteger32.1.3.6.1.4.1.272.4.23.8.20.10.90