capiX25DefWinSize
BIANCA-BRICK-CAPI-MIB ·
.1.3.6.1.4.1.272.4.7.12
Object
scalar
mandatory
r/w
Integer32
Specifies the X.25 default Windowsize used in ISO8208 (X.25 DTE <-> DTE) Filetransferprotocol. Applications such as OFTP normally uses 7 but some Applications did not use X.25 negotiation, so the CAPI uses here a default from 2 and the connection is closed by a X.25 Reset. Setting this value to 7 is not standard but useful for the customer to avoid this error.
Context
- MIB
- BIANCA-BRICK-CAPI-MIB
- OID
.1.3.6.1.4.1.272.4.7.12- Type
- scalar
- Access
- readwrite
- Status
- mandatory
- Parent
- capi
- Siblings
- 10
Syntax
Integer32
Values & Constraints
Object Constraints
range: 1-7
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| capiApplTable mandatory The capiApplTable contains information for all currently
registered CAPI 1.1 and CAPI 2.0 applications, and their
respective CAPI_REGISTER information.
Creating entries… | table | - | .1.3.6.1.4.1.272.4.7.1 |
| capiTcpNoDelay mandatory Enable or Disable TCP Nagle Algorithm for CAPI.
disable: Normal operation with Nagle support.
enable : Disable Nagle TCP Algorithm.
Enable TcpNoDelay increases Network load and de… | scalar | Enumeration | .1.3.6.1.4.1.272.4.7.10 |
| capiFaxG3Header mandatory Specifies whether the header-line and logo
('BIANCA/FAX'), should appear on outgoing facsimiles. The
value 'logo_header' allows the header-line and the logo
to be printed on the … | scalar | Enumeration | .1.3.6.1.4.1.272.4.7.11 |
| capiListenTable mandatory The capiListenTable contains the listen settings for each
CAPI application.
Creating entries: Entries can only be created by the
system and is performed automatically u… | table | - | .1.3.6.1.4.1.272.4.7.2 |
| capiPlciTable mandatory The capiPlciTable contains information for each currently
connected CAPI application (i.e. has a Physical Link
Connection Identifier associated with it).
Creating entri… | table | - | .1.3.6.1.4.1.272.4.7.3 |
| capiNcciTable mandatory The capiNcciTable contains information for each CAPI
NCCI (network control connection identifier). An NCCI
describes a logical connection on level 3. Several NCCIs
operating on th… | table | - | .1.3.6.1.4.1.272.4.7.4 |
| capiInfoTable mandatory The capiInfoTable contains the last 10 CAPI info codes
and their message identifiers for where the error occured.
The most recent message is at inx 09 with older messages
rolling … | table | - | .1.3.6.1.4.1.272.4.7.5 |
| capiConfigTable mandatory The capiConfigTable contains configuration information
for each ISDN stack. Setting these fields is optional, and
is not required.
Creating entries: Entries are created… | table | - | .1.3.6.1.4.1.272.4.7.6 |
| capiMultiControllerTable mandatory This table contains mappings between controller numbers
used by CAPI applications and the ISDN stacks available on
the BRICK (i.e., the Number field of the isdnStkTable).
The V… | table | - | .1.3.6.1.4.1.272.4.7.7 |
| capiAdminStatus mandatory Enable or disable CAPI | scalar | Enumeration | .1.3.6.1.4.1.272.4.7.9 |