capiPlciSelectB2Proto
BIANCA-BRICK-CAPI-MIB ·
.1.3.6.1.4.1.272.4.7.3.1.5
Object
column
mandatory
Enumeration
The current B2 protocol setting (CAPI 1.1 applications only).
Context
- MIB
- BIANCA-BRICK-CAPI-MIB
- OID
.1.3.6.1.4.1.272.4.7.3.1.5- Type
- column
- Access
- readonly
- Status
- mandatory
- Parent
- capiPlciEntry
- Table
- capiPlciTable
- Siblings
- 15
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | undef |
2 | x75 |
3 | hdlccrc |
4 | trans |
5 | sdlc |
6 | x75btx |
7 | fax |
8 | lapd |
9 | v110trans |
10 | v110sdlc |
11 | v110x75 |
12 | txonly |
241 | modem |
242 | v110sync |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| capiPlciNumber mandatory The PLCI (physical link connection identifier) of the
application. | column | - | .1.3.6.1.4.1.272.4.7.3.1.1 |
| capiPlciB1Config mandatory Current CAPI 2.0 B1 protocol configuration setting. | column | OctetString | .1.3.6.1.4.1.272.4.7.3.1.10 |
| capiPlciB2Proto mandatory Current CAPI 2.0 B2 protocol setting. | column | Enumeration | .1.3.6.1.4.1.272.4.7.3.1.11 |
| capiPlciB2Config mandatory Current CAPI 2.0 B2 protocol configuration setting. | column | OctetString | .1.3.6.1.4.1.272.4.7.3.1.12 |
| capiPlciB3Proto mandatory Current CAPI 2.0 B3 protocol setting. | column | Enumeration | .1.3.6.1.4.1.272.4.7.3.1.13 |
| capiPlciB3Config mandatory Current CAPI 2.0 B3 protocol configuration setting. | column | OctetString | .1.3.6.1.4.1.272.4.7.3.1.14 |
| capiPlciCipValue mandatory The current CIPValue setting. | column | Integer32 | .1.3.6.1.4.1.272.4.7.3.1.15 |
| capiPlciInfoMask mandatory The current InfoMask setting. | column | - | .1.3.6.1.4.1.272.4.7.3.1.16 |
| capiPlciApplication mandatory The application-number (capiApplNumber). | column | Integer32 | .1.3.6.1.4.1.272.4.7.3.1.2 |
| capiPlciController mandatory The ISDN controller number. This value refers to the
isdnStkNumber. | column | - | .1.3.6.1.4.1.272.4.7.3.1.3 |
| capiPlciState mandatory The current link state as described in the CAPI state
diagram. | column | Enumeration | .1.3.6.1.4.1.272.4.7.3.1.4 |
| capiPlciSelectB2Dlpd mandatory Current B2 protocol descriptor. DLPD = data link
protocol descriptor (CAPI 1.1 applications only). | column | OctetString | .1.3.6.1.4.1.272.4.7.3.1.6 |
| capiPlciSelectB3Proto mandatory Current B3 protocol setting (CAPI 1.1 applications
only). | column | Enumeration | .1.3.6.1.4.1.272.4.7.3.1.7 |
| capiPlciSelectB3Ncpd mandatory The current B3 Ncpd setting. NCPD = network control
protocol descriptor (CAPI 1.1 applications only). | column | OctetString | .1.3.6.1.4.1.272.4.7.3.1.8 |
| capiPlciB1Proto mandatory Current CAPI 2.0 B1 protocol setting. | column | Enumeration | .1.3.6.1.4.1.272.4.7.3.1.9 |