capiConfigV42bis
BIANCA-BRICK-CAPI-MIB ·
.1.3.6.1.4.1.272.4.7.6.1.7
Object
column
mandatory
r/w
Enumeration
Specifies whether V.42bis data compression should be used. If data compression is activated here,the receiving or sending side is first queried whether it supports data compression. The BRICK supports V.42bis data compression using up to 2 B-channels.
Context
- MIB
- BIANCA-BRICK-CAPI-MIB
- OID
.1.3.6.1.4.1.272.4.7.6.1.7- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- capiConfigEntry
- Table
- capiConfigTable
- Siblings
- 10
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | on |
2 | off |
3 | not-available |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| capiConfigStkNumber mandatory The isdnStkNumber this configuration belongs to. | column | Integer32 | .1.3.6.1.4.1.272.4.7.6.1.1 |
| capiConfigFax12000 mandatory Enable or disable the 12000Bps Mode for fax transmission.
A lot of fax receivers have problems with this tranmission
mode. Default value is off | column | Enumeration | .1.3.6.1.4.1.272.4.7.6.1.10 |
| capiConfigFaxTXLevel mandatory Set the transmit level to -x dB db0 = 0dB, db3 = -3dB.
In Germany -6dB (db6) is normally used for facsimile
transmission. | column | Enumeration | .1.3.6.1.4.1.272.4.7.6.1.11 |
| capiConfigFaxG3RcvSpeed mandatory The G3 facsimile receive speed. For CM-EBRI this
should be set to maximum.
Set this field to `delete' to remove this entry.
The entry can be deleted only if there is no entry
… | column | Enumeration | .1.3.6.1.4.1.272.4.7.6.1.2 |
| capiConfigFaxG3ECM mandatory Specifies whether ECM (error correction mode)
should be used for G3 facsimile transmissions. | column | Enumeration | .1.3.6.1.4.1.272.4.7.6.1.3 |
| capiConfigFaxG3Header mandatory Specifies whether the header-line and logo
('BIANCA/FAX'), should appear on outgoing facsimiles. The
value 'logo_header' allows the header-line and the logo
to be printed on the … | column | Enumeration | .1.3.6.1.4.1.272.4.7.6.1.4 |
| capiConfigVoiceCoding mandatory Switches the bit order for voice-data. | column | Enumeration | .1.3.6.1.4.1.272.4.7.6.1.5 |
| capiConfigSendAlerting mandatory For CAPI 1.1 this specifies when the CAPI server
should send alert messages for incoming calls. | column | Enumeration | .1.3.6.1.4.1.272.4.7.6.1.6 |
| capiConfigModemDefault mandatory Specifies the modem profile of the mdmProfileTable
which contains the default modem parameters to use
for modem connections. | column | Enumeration | .1.3.6.1.4.1.272.4.7.6.1.8 |
| capiConfigFaxModulation mandatory Set the default transmission protocol for fax.
- v17 max. 14400 Bps new standard
- v33 max. 14000 Bps early standard
- v29 max. 9600 Bps fax standard
- v17s v17 with Swiss cap… | column | Enumeration | .1.3.6.1.4.1.272.4.7.6.1.9 |