capiConfigFaxG3ECM
BIANCA-BRICK-CAPI-MIB ·
.1.3.6.1.4.1.272.4.7.6.1.3
Object
column
mandatory
r/w
Enumeration
Specifies whether ECM (error correction mode) should be used for G3 facsimile transmissions.
Context
- MIB
- BIANCA-BRICK-CAPI-MIB
- OID
.1.3.6.1.4.1.272.4.7.6.1.3- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- capiConfigEntry
- Table
- capiConfigTable
- Siblings
- 10
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | on |
2 | off |
3 | not-available |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| capiConfigStkNumber mandatory The isdnStkNumber this configuration belongs to. | column | Integer32 | .1.3.6.1.4.1.272.4.7.6.1.1 |
| capiConfigFax12000 mandatory Enable or disable the 12000Bps Mode for fax transmission.
A lot of fax receivers have problems with this tranmission
mode. Default value is off | column | Enumeration | .1.3.6.1.4.1.272.4.7.6.1.10 |
| capiConfigFaxTXLevel mandatory Set the transmit level to -x dB db0 = 0dB, db3 = -3dB.
In Germany -6dB (db6) is normally used for facsimile
transmission. | column | Enumeration | .1.3.6.1.4.1.272.4.7.6.1.11 |
| capiConfigFaxG3RcvSpeed mandatory The G3 facsimile receive speed. For CM-EBRI this
should be set to maximum.
Set this field to `delete' to remove this entry.
The entry can be deleted only if there is no entry
… | column | Enumeration | .1.3.6.1.4.1.272.4.7.6.1.2 |
| capiConfigFaxG3Header mandatory Specifies whether the header-line and logo
('BIANCA/FAX'), should appear on outgoing facsimiles. The
value 'logo_header' allows the header-line and the logo
to be printed on the … | column | Enumeration | .1.3.6.1.4.1.272.4.7.6.1.4 |
| capiConfigVoiceCoding mandatory Switches the bit order for voice-data. | column | Enumeration | .1.3.6.1.4.1.272.4.7.6.1.5 |
| capiConfigSendAlerting mandatory For CAPI 1.1 this specifies when the CAPI server
should send alert messages for incoming calls. | column | Enumeration | .1.3.6.1.4.1.272.4.7.6.1.6 |
| capiConfigV42bis mandatory Specifies whether V.42bis data compression should be
used. If data compression is activated here,the receiving
or sending side is first queried whether it supports data
compressio… | column | Enumeration | .1.3.6.1.4.1.272.4.7.6.1.7 |
| capiConfigModemDefault mandatory Specifies the modem profile of the mdmProfileTable
which contains the default modem parameters to use
for modem connections. | column | Enumeration | .1.3.6.1.4.1.272.4.7.6.1.8 |
| capiConfigFaxModulation mandatory Set the default transmission protocol for fax.
- v17 max. 14400 Bps new standard
- v33 max. 14000 Bps early standard
- v29 max. 9600 Bps fax standard
- v17s v17 with Swiss cap… | column | Enumeration | .1.3.6.1.4.1.272.4.7.6.1.9 |