aliveTaskId
BIANCA-BRICK-ALIVE-MIB ·
.1.3.6.1.4.1.272.4.36.1.1.8
Object
column
mandatory
r/w
Integer32
The id of the task definition used exclusively for
table sorting purposes (multiple instances are possible).
The default value is 1.
Context
- MIB
- BIANCA-BRICK-ALIVE-MIB
- OID
.1.3.6.1.4.1.272.4.36.1.1.8- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- aliveEntry
- Table
- aliveTable
- Siblings
- 14
Syntax
Integer32
Values & Constraints
Object Constraints
range: 1-255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| aliveSurveillance mandatory Specifies what kind of event may trigger an alive entry.
Being a generalisation of MIB table ipHostsAliveTable the
latter table may be replaced by it. Possible values are:
… | column | Enumeration | .1.3.6.1.4.1.272.4.36.1.1.1 |
| aliveMasterVrId mandatory The id of the virtual router used for monitoring
the interface. The associated BRRP configuration
is stored in the biboBrrpOperTable. | column | Integer32 | .1.3.6.1.4.1.272.4.36.1.1.10 |
| aliveMasterBrrpState mandatory The operation state of the virtual router which triggers
the specified action on the slave BRRP virtual router.
The states 'initialize', 'backup' and 'master' are
identical to the… | column | Enumeration | .1.3.6.1.4.1.272.4.36.1.1.11 |
| aliveSlaveProto mandatory The protocol used for the slave (or backup) interface
(or virtual router) keepalive operation status switching.
o brrp - monitoring via the Bintec Router Redundancy… | column | Enumeration | .1.3.6.1.4.1.272.4.36.1.1.12 |
| aliveSlaveVrId mandatory The virtual router id used for interface admin status
switching. The associated BRRP configuration is stored
in the biboBrrpOperTable. | column | Integer32 | .1.3.6.1.4.1.272.4.36.1.1.13 |
| aliveSlaveBrrpState mandatory The admin state of the virtual router controlling the
slave interface.
down(1) -- the virtual routes enters the initialize state
up(2) -- the virtual router switc… | column | Enumeration | .1.3.6.1.4.1.272.4.36.1.1.14 |
| aliveSlaveBrrpDecrPrio mandatory This value is used to decrement 'biboBrrpOperPriority' when
virtual router state switches from 'up' to 'decrPrio'
(see 'aliveSlaveBrrpState')
It is used again to in… | column | Integer32 | .1.3.6.1.4.1.272.4.36.1.1.15 |
| aliveIfIndex mandatory The index of interface to monitor the operation status.
Like referenced in the ifTable.
Applicable for surveillance mode 'interface'. | column | Integer32 | .1.3.6.1.4.1.272.4.36.1.1.2 |
| aliveState mandatory The state of the watched entity.
Possible values are 'unknown', 'up' or 'down'.
This value is not used for surveillance mode 'brrp'.
The default value is 'unknown'. | column | Enumeration | .1.3.6.1.4.1.272.4.36.1.1.3 |
| aliveTrigger mandatory The variable trigger defines on change to what state
(depending on the surveillance mode) the defined action
is performed.
Possible values are 'up' or 'down'. | column | Enumeration | .1.3.6.1.4.1.272.4.36.1.1.4 |
| aliveAction mandatory This action is performed upon status change of the
respective entity to the given trigger condition.
Possible actions are 'up', 'down' or 'none'.
The default value … | column | Enumeration | .1.3.6.1.4.1.272.4.36.1.1.5 |
| aliveFirstIfIndex mandatory The first interface index affected by the action.
This value is not used for surveillance mode 'brrp'. | column | Integer32 | .1.3.6.1.4.1.272.4.36.1.1.6 |
| aliveIfIndexRange mandatory A range of interface indexes affected by the action
counted from aliveFirstIfIndex. Value '0' means that
only interface aliveFirstIfIndex is affected.
This value is not used for s… | column | Integer32 | .1.3.6.1.4.1.272.4.36.1.1.7 |
| aliveMasterProto mandatory The protocol used for interface keepalive monitoring.
Possible values are:
o brrp - monitoring via the Bintec Router Redundancy Protocol
which is a derivat… | column | Enumeration | .1.3.6.1.4.1.272.4.36.1.1.9 |