aliveSlaveBrrpDecrPrio
BIANCA-BRICK-ALIVE-MIB ·
.1.3.6.1.4.1.272.4.36.1.1.15
Object
column
mandatory
r/w
Integer32
This value is used to decrement 'biboBrrpOperPriority' when
virtual router state switches from 'up' to 'decrPrio'
(see 'aliveSlaveBrrpState')
It is used again to increment 'biboBrrpOperPriority' when
the virtual router state switches from 'decrPrio' to 'up'
(see 'aliveSlaveBrrpState')
If this value changes while router is in state decrPrio, the
old value is internally stored so that the correct inverse
operation can be performed once condition for decremented
priority becomes false again.
Default value is '10'.
Context
- MIB
- BIANCA-BRICK-ALIVE-MIB
- OID
.1.3.6.1.4.1.272.4.36.1.1.15- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- aliveEntry
- Table
- aliveTable
- Siblings
- 14
Syntax
Integer32
Values & Constraints
Object Constraints
range: 1-254
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| aliveSurveillance mandatory Specifies what kind of event may trigger an alive entry.
Being a generalisation of MIB table ipHostsAliveTable the
latter table may be replaced by it. Possible values are:
… | column | Enumeration | .1.3.6.1.4.1.272.4.36.1.1.1 |
| aliveMasterVrId mandatory The id of the virtual router used for monitoring
the interface. The associated BRRP configuration
is stored in the biboBrrpOperTable. | column | Integer32 | .1.3.6.1.4.1.272.4.36.1.1.10 |
| aliveMasterBrrpState mandatory The operation state of the virtual router which triggers
the specified action on the slave BRRP virtual router.
The states 'initialize', 'backup' and 'master' are
identical to the… | column | Enumeration | .1.3.6.1.4.1.272.4.36.1.1.11 |
| aliveSlaveProto mandatory The protocol used for the slave (or backup) interface
(or virtual router) keepalive operation status switching.
o brrp - monitoring via the Bintec Router Redundancy… | column | Enumeration | .1.3.6.1.4.1.272.4.36.1.1.12 |
| aliveSlaveVrId mandatory The virtual router id used for interface admin status
switching. The associated BRRP configuration is stored
in the biboBrrpOperTable. | column | Integer32 | .1.3.6.1.4.1.272.4.36.1.1.13 |
| aliveSlaveBrrpState mandatory The admin state of the virtual router controlling the
slave interface.
down(1) -- the virtual routes enters the initialize state
up(2) -- the virtual router switc… | column | Enumeration | .1.3.6.1.4.1.272.4.36.1.1.14 |
| aliveIfIndex mandatory The index of interface to monitor the operation status.
Like referenced in the ifTable.
Applicable for surveillance mode 'interface'. | column | Integer32 | .1.3.6.1.4.1.272.4.36.1.1.2 |
| aliveState mandatory The state of the watched entity.
Possible values are 'unknown', 'up' or 'down'.
This value is not used for surveillance mode 'brrp'.
The default value is 'unknown'. | column | Enumeration | .1.3.6.1.4.1.272.4.36.1.1.3 |
| aliveTrigger mandatory The variable trigger defines on change to what state
(depending on the surveillance mode) the defined action
is performed.
Possible values are 'up' or 'down'. | column | Enumeration | .1.3.6.1.4.1.272.4.36.1.1.4 |
| aliveAction mandatory This action is performed upon status change of the
respective entity to the given trigger condition.
Possible actions are 'up', 'down' or 'none'.
The default value … | column | Enumeration | .1.3.6.1.4.1.272.4.36.1.1.5 |
| aliveFirstIfIndex mandatory The first interface index affected by the action.
This value is not used for surveillance mode 'brrp'. | column | Integer32 | .1.3.6.1.4.1.272.4.36.1.1.6 |
| aliveIfIndexRange mandatory A range of interface indexes affected by the action
counted from aliveFirstIfIndex. Value '0' means that
only interface aliveFirstIfIndex is affected.
This value is not used for s… | column | Integer32 | .1.3.6.1.4.1.272.4.36.1.1.7 |
| aliveTaskId mandatory The id of the task definition used exclusively for
table sorting purposes (multiple instances are possible).
The default value is 1. | column | Integer32 | .1.3.6.1.4.1.272.4.36.1.1.8 |
| aliveMasterProto mandatory The protocol used for interface keepalive monitoring.
Possible values are:
o brrp - monitoring via the Bintec Router Redundancy Protocol
which is a derivat… | column | Enumeration | .1.3.6.1.4.1.272.4.36.1.1.9 |