wlanIfaceDot11nAmsdu
BEGEMOT-WIRELESS-MIB ·
.1.3.6.1.4.1.12325.1.210.1.3.1.34
Object
column
r/w
WlanIfaceDot11nPduType
The value of this object specifies whether sending and receiving of AMSDU frames is enabled on an interface operating in 802.11n mode.
Context
- MIB
- BEGEMOT-WIRELESS-MIB
- OID
.1.3.6.1.4.1.12325.1.210.1.3.1.34- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- wlanIfaceConfigEntry
- Table
- wlanIfaceConfigTable
- Siblings
- 44
Syntax
WlanIfaceDot11nPduType
- Source
- WlanIfaceDot11nPduType
- Base type
Enumeration
Values & Constraints
Type Values
0 | disabled |
1 | rxOnly |
2 | txOnly |
3 | txAndRx |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| wlanIfacePacketBurst The value of this object controls whether packet bursting is
enabled on the interface. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.12325.1.210.1.3.1.1 |
| wlanIfaceFragmentThreshold The value of this object controls the threshold for which
transmitted frames are broken into fragments. Setting the value
of this object to 2346 will disable transmit fragmentatio… | column | Integer32 | .1.3.6.1.4.1.12325.1.210.1.3.1.10 |
| wlanIfaceRTSThreshold The value of this object controls the threshold for which
transmitted frames are preceded by transmission of an RTS
control frame. Setting the value of this object to 2346 will
di… | column | bytes Integer32 | .1.3.6.1.4.1.12325.1.210.1.3.1.11 |
| wlanIfaceWlanPrivacySubscribe The value of this object specifies whether Wireless Privacy
Subscriber support is enabled on the interface. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.12325.1.210.1.3.1.12 |
| wlanIfaceBgScan The value of this object specifies whether background scanning
is enabled for an interface operating in station mode. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.12325.1.210.1.3.1.13 |
| wlanIfaceBgScanIdle The value of this object specifies the minimum time a station must
be idle before a background scan is initiated on an interface
operating in station mode. | column | milliseconds SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12325.1.210.1.3.1.14 |
| wlanIfaceBgScanInterval The value of this object specifies the interval at which background
scanning is attempted when operating in station mode. | column | seconds SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12325.1.210.1.3.1.15 |
| wlanIfaceBeaconMissedThreshold The value of this object specifies the number of consecutive missed
beacons before an interface operating in station mode will attempt
to search for a new access point. | column | frames Integer32 | .1.3.6.1.4.1.12325.1.210.1.3.1.16 |
| wlanIfaceDesiredBssid The value of this object specifies the MAC address of the desired
access point to use when an interface is operating as a station. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.12325.1.210.1.3.1.17 |
| wlanIfaceRoamingMode The value of this object specifies the desired system behavior
when the interface is operating as a station and the communication
with the current access point is broken. | column | Enumeration | .1.3.6.1.4.1.12325.1.210.1.3.1.18 |
| wlanIfaceDot11d The value of this object specifies whether 802.11d specification
support is enabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.12325.1.210.1.3.1.19 |
| wlanIfaceCountryCode The value of this object controls the country regulatory
constraints for operation of this wireless interface. The first
two octets of this string is the two character country cod… | column | OctetString | .1.3.6.1.4.1.12325.1.210.1.3.1.2 |
| wlanIfaceDot11h The value of this object specifies whether 802.11h support
including spectrum management is enabled. The value is only
meaningfull for interfaces that support 802.11h specificatio… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.12325.1.210.1.3.1.20 |
| wlanIfaceDynamicWds The value of this object specifies whether Dynamic WDS (DWDS)
support is enabled. The value is only meaningful for interfaces
that support Dynamic WDS. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.12325.1.210.1.3.1.21 |
| wlanIfacePowerSave The value of this object specifies whether powersave operation
is enabled. The value is only meaningful for interfaces that
support powersave operation. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.12325.1.210.1.3.1.22 |
| wlanIfaceApBridge The value of this object specifies whether packets between
wireless clients will be passed directly by an interface
operating in host ap mode. Disabling it may be useful in
situat… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.12325.1.210.1.3.1.23 |
| wlanIfaceBeaconInterval The value of this object specifies the interval at with beacon
frames are sent when an interface is operating in ad-hoc or ap
mode. The beacon interval is specified in TU's (1024 … | column | Integer32 | .1.3.6.1.4.1.12325.1.210.1.3.1.24 |
| wlanIfaceDtimPeriod The value of this object specifies the DTIM period at which
buffered multicast data frames are transmitted by an interface
operating in host ap mode. Its value indicates the numbe… | column | Integer32 | .1.3.6.1.4.1.12325.1.210.1.3.1.25 |
| wlanIfaceHideSsid The value of this object specifies whether broadcasting of the
SSID in beacon frames and responding to undirected probe request
frames is enabled for an interface operating in ap … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.12325.1.210.1.3.1.26 |
| wlanIfaceInactivityProccess The value of this object specifies whether inactivity processing
for associated station on an interface operating in ap mode is
enabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.12325.1.210.1.3.1.27 |
| wlanIfaceDot11gProtMode The value of this object specifies the technique used for
protecting OFDM frames in a mixed 11b/11g network. | column | Enumeration | .1.3.6.1.4.1.12325.1.210.1.3.1.28 |
| wlanIfaceDot11gPureMode The value of this object specifies whether only 802.11g-capable
stations will be allowed to associate to an interface operating
as access point in 802.11g mode. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.12325.1.210.1.3.1.29 |
| wlanIfaceRegDomain This object specifies the regulatory domain to use when calculating
the regulatory constraints for operation of the interface. | column | WlanRegDomainCode | .1.3.6.1.4.1.12325.1.210.1.3.1.3 |
| wlanIfaceDot11nPureMode The value of this object specifies whether only HT-capable
stations will be allowed to associate to an interface operating
as access point in 802.11n mode. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.12325.1.210.1.3.1.30 |
| wlanIfaceDot11nAmpdu The value of this object specifies whether sending and
receiving of AMPDU frames is enabled on an interface
operating in 802.11n mode. | column | WlanIfaceDot11nPduType | .1.3.6.1.4.1.12325.1.210.1.3.1.31 |
| wlanIfaceDot11nAmpduDensity The value of this object specifies the AMPDU density parameter
for an interface operating in 802.11n mode. | column | 1/100ths-of-microsecond Integer32 | .1.3.6.1.4.1.12325.1.210.1.3.1.32 |
| wlanIfaceDot11nAmpduLimit The value of this object specifies a limit on the AMPDU packet
size for receiving AMPDU frames for an interface operating in
802.11n mode. | column | Integer32 | .1.3.6.1.4.1.12325.1.210.1.3.1.33 |
| wlanIfaceDot11nAmsduLimit The value of this object specifies a limit on the AMSDU packet
size when sending and receiving AMSDU frames for an interface
operating in 802.11n mode. | column | Integer32 | .1.3.6.1.4.1.12325.1.210.1.3.1.35 |
| wlanIfaceDot11nHighThroughput The value of this object specifies whether use of High Throughput
(HT) is enabled for an interface operating in 802.11n mode. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.12325.1.210.1.3.1.36 |
| wlanIfaceDot11nHTCompatible The value of this object specifies whether use of compatibility
support for pre-802.11n devices is enabled for an interface
operating in 802.11n mode. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.12325.1.210.1.3.1.37 |
| wlanIfaceDot11nHTProtMode The value of this object specifies the technique used for
protecting HT frames in a mixed legacy/HT network for interfaces
operating in 802.11n mode. | column | Enumeration | .1.3.6.1.4.1.12325.1.210.1.3.1.38 |
| wlanIfaceDot11nRIFS The value of this object specifies whether Reduced InterFrame
Spacing (RIFS) is enabled for an interface operating in 802.11n
mode on an HT channel. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.12325.1.210.1.3.1.39 |
| wlanIfaceDesiredSsid The desired SSID for the interface as an ASCII string.
Specifying an empty string shall remove the current configured
SSID. | column | OctetString | .1.3.6.1.4.1.12325.1.210.1.3.1.4 |
| wlanIfaceDot11nShortGI The value of this object specifies whether use of Short Guard
Interval is enabled on an interface operating in 802.11n mode
on an HT channel. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.12325.1.210.1.3.1.40 |
| wlanIfaceDot11nSMPSMode The value of this object specifies whether use of Spatial Multiplexing
Power Save (SMPS) is enabled on an interface operating in 802.11n mode
and whether SMPS mode is set to Stati… | column | Enumeration | .1.3.6.1.4.1.12325.1.210.1.3.1.41 |
| wlanIfaceTdmaSlot The value of this object specifies the slot configuration to use
when operating in TDMA mode. | column | Integer32 | .1.3.6.1.4.1.12325.1.210.1.3.1.42 |
| wlanIfaceTdmaSlotCount The value of this object specifies the number of slots to use to
setup a BSS for an interface operating in TDMA mode. | column | Integer32 | .1.3.6.1.4.1.12325.1.210.1.3.1.43 |
| wlanIfaceTdmaSlotLength The value of this object specifies a slot length that each station
has when a BSS is setup by an interface operating in TDMA mode. | column | microseconds Integer32 | .1.3.6.1.4.1.12325.1.210.1.3.1.44 |
| wlanIfaceTdmaBeaconInterval The value of this object specifies the number of superframes at
which a beacon frame is sent to synchronize the TDMA slot timing
for interfaces operating in TDMA mode. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12325.1.210.1.3.1.45 |
| wlanIfaceDesiredChannel The desired operating channel for this interface. The value of this
column is the channel index (wlanIfaceChannelId) of the corresponding
entry from the wlanIfaceChannelTable. The… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12325.1.210.1.3.1.5 |
| wlanIfaceDynamicFreqSelection The value of this object specifies whether Dynamic Frequency
Selection (DFS) as specified in 802.11h is enabled on an
interface that supports 802.11h and DFS. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.12325.1.210.1.3.1.6 |
| wlanIfaceFastFrames The value of this object controls whether use of Atheros Fast
Frames is enabled when when communicating with another Fast
Frames-capable station. The value is only meaningful for
… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.12325.1.210.1.3.1.7 |
| wlanIfaceDturbo The value of this object controls whether use of Atheros Dynamic
Turbo mode is enabled when when communicating with another Dynamic
Turbo-capable station. The value is only meanin… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.12325.1.210.1.3.1.8 |
| wlanIfaceTxPower The value of this object controls the power used to transmit
frames. Accepted values are in units of one tenths of a dBm in
steps of .5 dBm, e.g setting the value of this object t… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12325.1.210.1.3.1.9 |