bdenvTestPt4MarginPercent

BDCOM-SYS · .1.3.6.1.4.1.3320.2.1.93
MIB view Table view

Object

scalar mandatory Integer32 
+/- Percentage that will shut the router
down, (e.g. 15%) typically +12 volt

Context

MIB
BDCOM-SYS
OID
.1.3.6.1.4.1.3320.2.1.93
Type
scalar
Access
readonly
Status
mandatory
Parent
bdlsystem
Siblings
111

Syntax

Integer32
Source
COPS-PR-SPPIInteger32
Base type
Integer32

Values & Constraints

Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
bdromId mandatory
This variable contains a printable octet string which contains the System Bootstrap description and version identification.
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.3320.2.1.1
bdbufferElMax mandatory
Contains the maximum number of buffer elements.
scalarInteger32.1.3.6.1.4.1.3320.2.1.10
bdenvTestPt5last mandatory
Value of TestPt5 when last shutdown occurred.
scalarInteger32.1.3.6.1.4.1.3320.2.1.100
bdenvTestPt6last mandatory
Value of TestPt6 when last shutdown occurred.
scalarInteger32.1.3.6.1.4.1.3320.2.1.101
bdenvTestPt1warn mandatory
Is this test point at a warning level?
scalarEnumeration.1.3.6.1.4.1.3320.2.1.102
bdenvTestPt2warn mandatory
Is this test point at a warning level?
scalarEnumeration.1.3.6.1.4.1.3320.2.1.103
bdenvTestPt3warn mandatory
Is this test point at a warning level?
scalarEnumeration.1.3.6.1.4.1.3320.2.1.104
bdenvTestPt4warn mandatory
Is this test point at a warning level?
scalarEnumeration.1.3.6.1.4.1.3320.2.1.105
bdenvTestPt5warn mandatory
Is this test point at a warning level?
scalarEnumeration.1.3.6.1.4.1.3320.2.1.106
bdenvTestPt6warn mandatory
Is this test point at a warning level?
scalarEnumeration.1.3.6.1.4.1.3320.2.1.107
bdenvFirmVersion mandatory
Description of Environmental Card firmware
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.3320.2.1.108
bdenvTechnicianID mandatory
Technician ID
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.3320.2.1.109
bdbufferElHit mandatory
Contains the number of buffer element hits.
scalarInteger32.1.3.6.1.4.1.3320.2.1.11
bdenvType mandatory
The type of environmental card
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.3320.2.1.110
bdenvBurnDate mandatory
The calibration / burn in date
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.3320.2.1.111
bdenvSerialNumber mandatory
Serial Number of environmental monitor card
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.3320.2.1.112
bdbufferElMiss mandatory
Contains the number of buffer element misses.
scalarInteger32.1.3.6.1.4.1.3320.2.1.12
bdbufferElCreate mandatory
Contains the number of buffer element creates.
scalarInteger32.1.3.6.1.4.1.3320.2.1.13
bdbufferSmSize mandatory
Contains the size of small buffers.
scalarInteger32.1.3.6.1.4.1.3320.2.1.14
bdbufferSmTotal mandatory
Contains the total number of small buffers.
scalarInteger32.1.3.6.1.4.1.3320.2.1.15
bdbufferSmFree mandatory
Contains the number of free small buffers.
scalarInteger32.1.3.6.1.4.1.3320.2.1.16
bdbufferSmMax mandatory
Contains the maximum number of small buffers.
scalarInteger32.1.3.6.1.4.1.3320.2.1.17
bdbufferSmHit mandatory
Contains the number of small buffer hits.
scalarInteger32.1.3.6.1.4.1.3320.2.1.18
bdbufferSmMiss mandatory
Contains the number of small buffer misses.
scalarInteger32.1.3.6.1.4.1.3320.2.1.19
bdwhyReload mandatory
This variable contains a printable octet string which contains the reason why the system was last restarted.
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.3320.2.1.2
bdbufferSmTrim mandatory
Contains the number of small buffer trims.
scalarInteger32.1.3.6.1.4.1.3320.2.1.20
bdbufferSmCreate mandatory
Contains the number of small buffer creates.
scalarInteger32.1.3.6.1.4.1.3320.2.1.21
bdbufferMdSize mandatory
Contains the size of medium buffers.
scalarInteger32.1.3.6.1.4.1.3320.2.1.22
bdbufferMdTotal mandatory
Contains the total number of medium buffers.
scalarInteger32.1.3.6.1.4.1.3320.2.1.23
bdbufferMdFree mandatory
Contains the number of free medium buffers.
scalarInteger32.1.3.6.1.4.1.3320.2.1.24
bdbufferMdMax mandatory
Contains the maximum number of medium buffers.
scalarInteger32.1.3.6.1.4.1.3320.2.1.25
bdbufferMdHit mandatory
Contains the number of medium buffer hits.
scalarInteger32.1.3.6.1.4.1.3320.2.1.26
bdbufferMdMiss mandatory
Contains the number of medium buffer misses.
scalarInteger32.1.3.6.1.4.1.3320.2.1.27
bdbufferMdTrim mandatory
Contains the number of medium buffer trims.
scalarInteger32.1.3.6.1.4.1.3320.2.1.28
bdbufferMdCreate mandatory
Contains the number of medium buffer creates.
scalarInteger32.1.3.6.1.4.1.3320.2.1.29
bdhostName mandatory
This variable represents the name of the host in printable ascii characters.
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.3320.2.1.3
bdbufferBgSize mandatory
Contains the size of big buffers.
scalarInteger32.1.3.6.1.4.1.3320.2.1.30
bdbufferBgTotal mandatory
Contains the total number of big buffers.
scalarInteger32.1.3.6.1.4.1.3320.2.1.31
bdbufferBgFree mandatory
Contains the number of free big buffers.
scalarInteger32.1.3.6.1.4.1.3320.2.1.32
bdbufferBgMax mandatory
Contains the maximum number of big buffers.
scalarInteger32.1.3.6.1.4.1.3320.2.1.33
bdbufferBgHit mandatory
Contains the number of big buffer hits.
scalarInteger32.1.3.6.1.4.1.3320.2.1.34
bdbufferBgMiss mandatory
Contains the number of big buffer misses.
scalarInteger32.1.3.6.1.4.1.3320.2.1.35
bdbufferBgTrim mandatory
Contains the number of big buffer trims.
scalarInteger32.1.3.6.1.4.1.3320.2.1.36
bdbufferBgCreate mandatory
Contains the number of big buffer creates.
scalarInteger32.1.3.6.1.4.1.3320.2.1.37
bdbufferLgSize mandatory
Contains the size of large buffers.
scalarInteger32.1.3.6.1.4.1.3320.2.1.38
bdbufferLgTotal mandatory
Contains the total number of large buffers.
scalarInteger32.1.3.6.1.4.1.3320.2.1.39
bddomainName mandatory
This variable is the domain portion of the domain name of the host.
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.3320.2.1.4
bdbufferLgFree mandatory
Contains the number of free large buffers.
scalarInteger32.1.3.6.1.4.1.3320.2.1.40
bdbufferLgMax mandatory
Contains the maximum number of large buffers.
scalarInteger32.1.3.6.1.4.1.3320.2.1.41
bdbufferLgHit mandatory
Contains the number of large buffer hits.
scalarInteger32.1.3.6.1.4.1.3320.2.1.42
bdbufferLgMiss mandatory
Contains the number of large buffer misses.
scalarInteger32.1.3.6.1.4.1.3320.2.1.43
bdbufferLgTrim mandatory
Contains the number of large buffer trims.
scalarInteger32.1.3.6.1.4.1.3320.2.1.44
bdbufferLgCreate mandatory
Contains the number of large buffer creates.
scalarInteger32.1.3.6.1.4.1.3320.2.1.45
bdbufferFail mandatory
Count of the number of buffer allocation failures.
scalarInteger32.1.3.6.1.4.1.3320.2.1.46
bdbufferNoMem mandatory
Count of the number of buffer create failures due to no free memory.
scalarInteger32.1.3.6.1.4.1.3320.2.1.47
bdnetConfigAddr mandatory
Holds the address of the host that supplied the network-confg file.
scalarRFC1155-SMIIpAddress.1.3.6.1.4.1.3320.2.1.48
bdnetConfigName mandatory
Holds the name of the network configuration file.
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.3320.2.1.49
bdauthAddr mandatory
This variable contains the last SNMP authorization failure IP address.
scalarRFC1155-SMIIpAddress.1.3.6.1.4.1.3320.2.1.5
bdnetConfigSet mandatory
Cause the loading of a new network-confg file using TFTP.
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.3320.2.1.50
bdhostConfigAddr obsolete
Contains the address of the host that provided the host-config file.
scalarRFC1155-SMIIpAddress.1.3.6.1.4.1.3320.2.1.51
bdhostConfigName obsolete
Contains the name of the last configured host-confg file.
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.3320.2.1.52
bdhostConfigSet obsolete
Cause the loading of a new host-confg file using TFTP.
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.3320.2.1.53
bdwriteMem mandatory
Write configuration into non-volatile memory / erase config memory if 0.
scalarInteger32.1.3.6.1.4.1.3320.2.1.54
bdwriteNet mandatory
Write configuration to host using TFTP.
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.3320.2.1.55
bdbusyPer mandatory
CPU busy percentage in the last 5 second period. Not the last 5 realtime seconds but the last 5 second period in the scheduler.
scalarInteger32.1.3.6.1.4.1.3320.2.1.56
bdavgBusy1 mandatory
1 minute exponentially-decayed moving average of the CPU busy percentage.
scalarInteger32.1.3.6.1.4.1.3320.2.1.57
bdavgBusy5 mandatory
5 minute exponentially-decayed moving average of the CPU busy percentage.
scalarInteger32.1.3.6.1.4.1.3320.2.1.58
bdidleCount mandatory
BDCom internal variable. not to be used
scalarInteger32.1.3.6.1.4.1.3320.2.1.59
bdbootHost mandatory
Contains the IP address of the host that supplied the currently running software.
scalarRFC1155-SMIIpAddress.1.3.6.1.4.1.3320.2.1.6
bdidleWired mandatory
BDCom internal variable. not to be used
scalarInteger32.1.3.6.1.4.1.3320.2.1.60
bdContactInfo mandatory
BDCom's name and address
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.3320.2.1.61
bdbufferHgSize mandatory
Contains the size of huge buffers.
scalarInteger32.1.3.6.1.4.1.3320.2.1.62
bdbufferHgTotal mandatory
Contains the total number of huge buffers.
scalarInteger32.1.3.6.1.4.1.3320.2.1.63
bdbufferHgFree mandatory
Contains the number of free huge buffers.
scalarInteger32.1.3.6.1.4.1.3320.2.1.64
bdbufferHgMax mandatory
Contains the maximum number of huge buffers.
scalarInteger32.1.3.6.1.4.1.3320.2.1.65
bdbufferHgHit mandatory
Contains the number of huge buffer hits.
scalarInteger32.1.3.6.1.4.1.3320.2.1.66
bdbufferHgMiss mandatory
Contains the number of huge buffer misses.
scalarInteger32.1.3.6.1.4.1.3320.2.1.67
bdbufferHgTrim mandatory
Contains the number of huge buffer trims.
scalarInteger32.1.3.6.1.4.1.3320.2.1.68
bdbufferHgCreate mandatory
Contains the number of huge buffer creates.
scalarInteger32.1.3.6.1.4.1.3320.2.1.69
bdping obsolete
The ping mib object is obsolete as of IOS 10.2 It has been superseded by the BDCom Ping MIB
scalarInteger32.1.3.6.1.4.1.3320.2.1.7
bdnetConfigProto mandatory
Holds the protocol that supplied the network-confg file.
scalarInteger32.1.3.6.1.4.1.3320.2.1.70
bdhostConfigProto mandatory
Holds the protocol that supplied the host- confg file.
scalarInteger32.1.3.6.1.4.1.3320.2.1.71
bdsysConfigAddr mandatory
Holds the address of the host that supplied the system boot image.
scalarRFC1155-SMIIpAddress.1.3.6.1.4.1.3320.2.1.72
bdsysConfigName mandatory
Holds the name of the system boot image.
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.3320.2.1.73
bdsysConfigProto mandatory
Holds the protocol that supplied the system boot image.
scalarInteger32.1.3.6.1.4.1.3320.2.1.74
bdsysClearARP mandatory
Perform a clearing of the entire ARP cache and invalidation of route caches.
scalarInteger32.1.3.6.1.4.1.3320.2.1.75
bdsysClearInt mandatory
Clear interface given IfIndex as value.
scalarInteger32.1.3.6.1.4.1.3320.2.1.76
bdenvPresent mandatory
Is there an environmental monitor card in this box?, 0 - No, 1-AGS card present, wrong firmware, 2-AGS CARD present, firmware ok, 3-7000 support
scalarInteger32.1.3.6.1.4.1.3320.2.1.77
bdenvTestPt1Descr mandatory
Description of the test point 1. Typically ambient air or the temperature of air entering the router
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.3320.2.1.78
bdenvTestPt1Measure mandatory
Current value of test point 1. Typically a temperature in centigrade.
scalarInteger32.1.3.6.1.4.1.3320.2.1.79
bdfreeMem obsolete
The freeMem mib object is obsolete as of IOS 11.1 It has been replaced with the BDCom memory pool mib
scalarInteger32.1.3.6.1.4.1.3320.2.1.8
bdenvTestPt2Descr mandatory
Description of the test point 2. Typically airflow or the temperature of air leaving the router
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.3320.2.1.80
bdenvTestPt2Measure mandatory
Current value of test point 2. Typically a temperature in centigrade.
scalarInteger32.1.3.6.1.4.1.3320.2.1.81
bdenvTestPt3Descr mandatory
Description of the test point 3. Typically +5 volt
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.3320.2.1.82
bdenvTestPt3Measure mandatory
Current value of test point 3. Typically the value in millivolts of the +5v supply
scalarInteger32.1.3.6.1.4.1.3320.2.1.83
bdenvTestPt4Descr mandatory
Description of the test point 4. Typically +12 volt
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.3320.2.1.84
bdenvTestPt4Measure mandatory
Current value of test point 4. Typically the value in millivolts of the +12v supply
scalarInteger32.1.3.6.1.4.1.3320.2.1.85
bdenvTestPt5Descr mandatory
Description of the test point 5. Typically -12 volt
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.3320.2.1.86
bdenvTestPt5Measure mandatory
Current value of test point 5. Typically the value in millivolts of the -12v supply
scalarInteger32.1.3.6.1.4.1.3320.2.1.87
bdenvTestPt6Descr mandatory
Description of the test point 6. Typically -5 volt
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.3320.2.1.88
bdenvTestPt6Measure mandatory
Current value of test point 6. Typically the value in millivolts of the -5v supply
scalarInteger32.1.3.6.1.4.1.3320.2.1.89
bdbufferElFree mandatory
Contains the number of free buffer elements.
scalarInteger32.1.3.6.1.4.1.3320.2.1.9
bdenvTestPt1MarginVal mandatory
Value at which the router will shutdown. Typically the ambient air temperature that will shut the router down. (e.g. 43)
scalarInteger32.1.3.6.1.4.1.3320.2.1.90
bdenvTestPt2MarginVal mandatory
Value at which the router will shutdown. Typically the airflow air temperature that will shut the router down. (e.g. 58)
scalarInteger32.1.3.6.1.4.1.3320.2.1.91
bdenvTestPt3MarginPercent mandatory
+/- Percentage that will shut the router down, (e.g. 10%) typically +5 volt
scalarInteger32.1.3.6.1.4.1.3320.2.1.92
bdenvTestPt5MarginPercent mandatory
+/- Percentage that will shut the router down, (e.g. 15%) typically -12 volt
scalarInteger32.1.3.6.1.4.1.3320.2.1.94
bdenvTestPt6MarginPercent mandatory
+/- Percentage that will shut the router down, (e.g. 10%) typically -5 volt
scalarInteger32.1.3.6.1.4.1.3320.2.1.95
bdenvTestPt1last mandatory
Value of TestPt1 when last shutdown occurred.
scalarInteger32.1.3.6.1.4.1.3320.2.1.96
bdenvTestPt2last mandatory
Value of TestPt2 when last shutdown occurred.
scalarInteger32.1.3.6.1.4.1.3320.2.1.97
bdenvTestPt3last mandatory
Value of TestPt3 when last shutdown occurred.
scalarInteger32.1.3.6.1.4.1.3320.2.1.98
bdenvTestPt4last mandatory
Value of TestPt4 when last shutdown occurred.
scalarInteger32.1.3.6.1.4.1.3320.2.1.99