redPrimaryType

BASIS-SHELF-MIB · .1.3.6.1.4.1.351.110.1.3.1.1.3

Object

column mandatory Enumeration

This object holds the type of the primary card
Some of the card types are not supported in the table but
they are defined here for consistency with the shelf card types.

Context

MIB: BASIS-SHELF-MIB
OID: .1.3.6.1.4.1.351.110.1.3.1.1.3
Type: column
Access: readonly
Status: mandatory
Parent: smRedMapEntry
Table: smRedMapTable
Siblings: 10

Syntax

Enumeration

Values & Constraints

Enumerated Values

`1`	other
`2`	bsc
`10`	aum-T3
`20`	tim
`30`	frsm-4T1
`31`	frsm-4E1
`34`	frsm-hs1
`35`	frsm-8T1
`36`	frsm-8E1
`37`	frsm-hs1b
`40`	ausm-4T1
`41`	ausm-4E1
`50`	ausm-8T1
`51`	ausm-8E1
`52`	ausmB-8T1
`53`	ausmB-8E1
`60`	cesm-4T1
`61`	cesm-4E1
`70`	imatm-T3T1
`71`	imatm-E3E1
`72`	imatmB-T1
`73`	imatmB-E1
`80`	frasm-8T1
`90`	cesm-8T1
`91`	cesm-8E1
`100`	bscsm-2
`101`	bscsm-4
`110`	atmt-8T1
`111`	atmt-8E1
`120`	frt-8T1
`121`	frt-8E1
`130`	frsm-2ct3
`131`	frsm-2t3
`132`	frsm-2e3
`133`	frsm-hs2
`134`	frsm-2t3b
`135`	frsm-2e3b
`136`	frsm-hs2b-hssi
`137`	frsm-hs2b-12In1
`140`	cesm-T3
`141`	cesm-E3
`150`	vism-8T1
`151`	vism-8E1
`1000`	pxm1
`1001`	pxm1-2t3e3
`1002`	pxm1-4oc3
`1003`	pxm1-oc12
`2000`	rpm
`2001`	rpm-pr

Related Objects

Sibling Objects

Object	Type	Syntax	OID
redPrimarySlotNum mandatory The index to the table. This is the slot number of the primary module in the redundant configuration. For MGX8850 Release 1.x,skip PXM slot 7,8,23,24, SRM slot 15,…	column	Integer32	`.1.3.6.1.4.1.351.110.1.3.1.1.1`
redFeature mandatory This is the feature of the primary card.	column	Integer32	`.1.3.6.1.4.1.351.110.1.3.1.1.10`
redLineModuleType mandatory This is the line module type for the primary card. This object is NOT configurable and it only has the type of the current line module that is present in this slot. Note that the…	column	Enumeration	`.1.3.6.1.4.1.351.110.1.3.1.1.11`
redRowStatus mandatory This will add, delete or modify the redundancy Note that mod is NOT used but it is there for consistency. This object is for creating and deleting an entry in smRed…	column	Enumeration	`.1.3.6.1.4.1.351.110.1.3.1.1.2`
redPrimaryState mandatory This object holds the state of the primary card Some of the states are not supported in the table but they are defined here for consistency with the cardStates. heldInReset, boot …	column	Enumeration	`.1.3.6.1.4.1.351.110.1.3.1.1.4`
redSecondarySlotNum mandatory This is the slot number of the redundant card for the primary card. SecondarySlotNum will be 0 when no secondary card covering the primary card. SecondarySlotNum in case of MGX885…	column	Integer32	`.1.3.6.1.4.1.351.110.1.3.1.1.5`
redSecondaryType mandatory This object holds the type of the redundant card Note that redSecondaryType is the same as redPrimaryType unless it is changed for a new service module. Some of the card types are…	column	Enumeration	`.1.3.6.1.4.1.351.110.1.3.1.1.6`
redSecondaryState mandatory This object holds the state of the secondary card Supported values are : nocard (1) : Module not present in the slot standby (2) : Module is in 'sta…	column	Enumeration	`.1.3.6.1.4.1.351.110.1.3.1.1.7`
redType mandatory This object describes the type of redundancy. The supported values are : yCable (1) : 1:1 (y cable) redundancy configuration. In this configuration,there is only one…	column	Enumeration	`.1.3.6.1.4.1.351.110.1.3.1.1.8`
redCoveringSlot mandatory This is the slot number of the primary card for which the secondary card is covering Note that redCoveringSlot is set to 0 when the primary is not being protected. If this prim…	column	Integer32	`.1.3.6.1.4.1.351.110.1.3.1.1.9`