redLineModuleType
BASIS-SHELF-MIB ·
.1.3.6.1.4.1.351.110.1.3.1.1.11
Object
column
mandatory
Enumeration
This is the line module type for the primary card. This object is NOT configurable and it only has the type of the current line module that is present in this slot. Note that the types that end with a -R are of redundant back card type which do not have a connector on the its faceplate and they are used for the redundant card but they can be plugged into the primary by mistake and this object would show its type.
Context
- MIB
- BASIS-SHELF-MIB
- OID
.1.3.6.1.4.1.351.110.1.3.1.1.11- Type
- column
- Access
- readonly
- Status
- mandatory
- Parent
- smRedMapEntry
- Table
- smRedMapTable
- Siblings
- 10
Syntax
Enumeration
Values & Constraints
Enumerated Values
16 | lm-DB15-4T1 |
17 | lm-DB15-4E1 |
18 | lm-BNC-4E1 |
19 | lm-DB15-4T1-R |
20 | lm-DB15-4E1-R |
21 | lm-BNC-4E1-R |
22 | lm-RJ48-8T1 |
23 | lm-RJ48-8E1 |
24 | lm-SMB-8E1 |
25 | lm-RJ48-T3T1 |
26 | lm-RJ48-E3E1 |
27 | lm-RJ48-T3E1 |
28 | lm-SMB-E3E1 |
29 | lm-RJ48-E3T1 |
30 | lm-SMB-T3E1 |
32 | lm-T3E3-D |
33 | lm-T3E3-B |
48 | lm-RJ48-8T1-R |
49 | lm-RJ48-8E1-R |
50 | lm-SMB-8E1-R |
60 | lm-HS1-4X21 |
61 | lm-HS1-3HSSI |
62 | lm-HS1-4V35 |
63 | lm-12In1-8s |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| redPrimarySlotNum mandatory The index to the table. This is the slot number of the
primary module in the redundant configuration.
For MGX8850 Release 1.x,skip PXM slot 7,8,23,24, SRM slot 15,… | column | Integer32 | .1.3.6.1.4.1.351.110.1.3.1.1.1 |
| redFeature mandatory This is the feature of the primary card. | column | Integer32 | .1.3.6.1.4.1.351.110.1.3.1.1.10 |
| redRowStatus mandatory This will add, delete or modify the redundancy
Note that mod is NOT used but it is there for consistency.
This object is for creating and deleting an entry in
smRed… | column | Enumeration | .1.3.6.1.4.1.351.110.1.3.1.1.2 |
| redPrimaryType mandatory This object holds the type of the primary card
Some of the card types are not supported in the table but
they are defined here for consistency with the shelf card types. | column | Enumeration | .1.3.6.1.4.1.351.110.1.3.1.1.3 |
| redPrimaryState mandatory This object holds the state of the primary card
Some of the states are not supported in the table but
they are defined here for consistency with the cardStates.
heldInReset, boot … | column | Enumeration | .1.3.6.1.4.1.351.110.1.3.1.1.4 |
| redSecondarySlotNum mandatory This is the slot number of the redundant card for the
primary card. SecondarySlotNum will be 0 when no secondary
card covering the primary card. SecondarySlotNum in case
of MGX885… | column | Integer32 | .1.3.6.1.4.1.351.110.1.3.1.1.5 |
| redSecondaryType mandatory This object holds the type of the redundant card
Note that redSecondaryType is the same as redPrimaryType
unless it is changed for a new service module.
Some of the card types are… | column | Enumeration | .1.3.6.1.4.1.351.110.1.3.1.1.6 |
| redSecondaryState mandatory This object holds the state of the secondary card
Supported values are :
nocard (1) : Module not present in the slot
standby (2) : Module is in 'sta… | column | Enumeration | .1.3.6.1.4.1.351.110.1.3.1.1.7 |
| redType mandatory This object describes the type of redundancy.
The supported values are :
yCable (1) : 1:1 (y cable) redundancy configuration. In this
configuration,there is only one… | column | Enumeration | .1.3.6.1.4.1.351.110.1.3.1.1.8 |
| redCoveringSlot mandatory This is the slot number of the primary card for which
the secondary card is covering
Note that redCoveringSlot is set to 0 when the primary
is not being protected. If this prim… | column | Integer32 | .1.3.6.1.4.1.351.110.1.3.1.1.9 |