hwFailures
BASIS-GENERIC-MIB ·
.1.3.6.1.4.1.351.110.2.1.25
Object
scalar
mandatory
Integer32
Hardware failure code.
Context
- MIB
- BASIS-GENERIC-MIB
- OID
.1.3.6.1.4.1.351.110.2.1.25- Type
- scalar
- Access
- readonly
- Status
- mandatory
- Parent
- cardInformation
- Siblings
- 35
Syntax
Integer32
- Source
- COPS-PR-SPPIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| moduleSlotNumber mandatory Slot number this card is present | scalar | Integer32 | .1.3.6.1.4.1.351.110.2.1.1 |
| lineModuleDescription mandatory This object contains description of the line module. | scalar | OctetString | .1.3.6.1.4.1.351.110.2.1.10 |
| lineModuleSerialNum mandatory This object contains Serial number of the line module. | scalar | OctetString | .1.3.6.1.4.1.351.110.2.1.11 |
| lineModuleHWRev mandatory This object contains Hardware revision for line module. | scalar | OctetString | .1.3.6.1.4.1.351.110.2.1.12 |
| lineModuleFWRev mandatory Firmware revision for line module.
The current version does not have any
firmware, hence will always contains
zero length octet string. | scalar | OctetString | .1.3.6.1.4.1.351.110.2.1.13 |
| lineModuleState mandatory line module status. | scalar | Enumeration | .1.3.6.1.4.1.351.110.2.1.14 |
| moduleTrapAlarmSeverity mandatory This object is sent to managers as part of all Trap PDUs, to
determine the module alarm severity. An implementation may
not support all the possible values.
The Possi… | scalar | Enumeration | .1.3.6.1.4.1.351.110.2.1.15 |
| mibVersionNumber mandatory MIB version number. Updated when any part of
the MIB changes. | scalar | Integer32 | .1.3.6.1.4.1.351.110.2.1.16 |
| configChangeTypeBitMap mandatory Configuration change Type BitMap
bit 0 set = Card Configuration Change
bit 1 set = Line Configuration Change
bit 2 set = Port Configuration Change
bit 3 set = Chan Configuration C… | scalar | Integer32 | .1.3.6.1.4.1.351.110.2.1.17 |
| configChangeObjectIndex mandatory Configuration change object index, could be
line number or port number or channel number
depends on the type bitmap, for port resouce
partition change (bit 17), this index is act… | scalar | Integer32 | .1.3.6.1.4.1.351.110.2.1.18 |
| configChangeStatus mandatory This object is applicable only for traps.
The SNMP operation may not be meaningful.
The value contained in this object is same as
the value of the other objects which a… | scalar | Integer32 | .1.3.6.1.4.1.351.110.2.1.19 |
| functionModuleType mandatory This object holds the type of the card. The card
can type is for Processor module as well as service module. | scalar | Enumeration | .1.3.6.1.4.1.351.110.2.1.2 |
| cardIntegratedAlarmBitMap mandatory Bit position represents the different types of alarm
for ASC:
bit 0: ShelfFunctionModuleState (BNM only)
(failed/boot/mismatch/heldinReset)
bit 1: Lin… | scalar | Integer32 | .1.3.6.1.4.1.351.110.2.1.20 |
| cleiCode mandatory Common Language Equipment(CLEI) Code. | scalar | OctetString | .1.3.6.1.4.1.351.110.2.1.21 |
| macAddress mandatory Ethernet address (base address) stored in
NVRAM, entered by manfacturing. | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.351.110.2.1.22 |
| macAddrBlkSize mandatory The MAC address block size, entered by
manufacturing. | scalar | Integer32 | .1.3.6.1.4.1.351.110.2.1.23 |
| finalTestTechnician mandatory The Final Test Technician Employee Identification Number. | scalar | OctetString | .1.3.6.1.4.1.351.110.2.1.24 |
| hwHistory mandatory RMA Test History - RMA Failure Code. | scalar | Integer32 | .1.3.6.1.4.1.351.110.2.1.26 |
| secLineModuleType mandatory This object contains the type of secondary
line module(back card).
Physically it is the bottom card behind the backplane.
Normally with connectors for physical devices.
These ar… | scalar | Enumeration | .1.3.6.1.4.1.351.110.2.1.27 |
| secLineModuleDescription mandatory Description of the Secondary line module.
This Object is applicable only to selected MGX switches. | scalar | OctetString | .1.3.6.1.4.1.351.110.2.1.28 |
| secLineModuleSerialNum mandatory Serial number of the secondary(bottom) line module.
This object is applicable only to selected MGX switches. | scalar | OctetString | .1.3.6.1.4.1.351.110.2.1.29 |
| functionModuleDescription mandatory Describes the card | scalar | OctetString | .1.3.6.1.4.1.351.110.2.1.3 |
| secLineModuleHWRev mandatory Hardware revision for secondary (bottom) line module
This object is applicable only to selected MGX switches. | scalar | OctetString | .1.3.6.1.4.1.351.110.2.1.30 |
| secLineModuleFWRev mandatory Firmware revision for Secondary line module
This object is applicable only to selected MGX switches.
If there is no Firmware revision,
then this object returns 0. | scalar | OctetString | .1.3.6.1.4.1.351.110.2.1.31 |
| secLineModuleState mandatory line module status of secondary (bottom) back card.
This object is applicable only to selected MGX switches. | scalar | Enumeration | .1.3.6.1.4.1.351.110.2.1.32 |
| configChangeParentObjectIndex mandatory Parent object index, could be
- line index
- port index
This object will indicate the index of the immediate
higher level object (line or port) of configChangeObjectInd… | scalar | Integer32 | .1.3.6.1.4.1.351.110.2.1.33 |
| configChangeGrandParentObjectIndex mandatory Grand Parent object index, could be
- line index
This object will indicate the index of the immediate
higher level object (line) of configChangeParentObjectIndex.
This … | scalar | Integer32 | .1.3.6.1.4.1.351.110.2.1.34 |
| configChangeSMSpecificObject mandatory configChangeSMSpecificObject is a generic object
which is Service Module Specific. It can be used
for different purposes in different cards. The
usage of the same with regard … | scalar | Integer32 | .1.3.6.1.4.1.351.110.2.1.35 |
| transId mandatory Per card transaction ID. This object is used to keep
track of configuration change on the card.
The transId will be incremented by one for every
configuration change on the card. | scalar | Integer32 | .1.3.6.1.4.1.351.110.2.1.36 |
| functionModuleSerialNum mandatory Serial number of the function Module. | scalar | OctetString | .1.3.6.1.4.1.351.110.2.1.4 |
| functionModuleHWRev mandatory Hardware revision number for function Module. | scalar | OctetString | .1.3.6.1.4.1.351.110.2.1.5 |
| functionModuleFWRev mandatory Firmware revision number of the function Module. | scalar | OctetString | .1.3.6.1.4.1.351.110.2.1.6 |
| functionModuleState mandatory This object holds the status of a card in a particular shelf-slot.
The possible values are :
nocard(1) : card not present.
standby(2) : card in st… | scalar | Enumeration | .1.3.6.1.4.1.351.110.2.1.7 |
| functionModuleResetReason mandatory Last reason for card to reset.
The possible values are :
powerUp(1) : power up
parityError(2) : parity error
watchDog(3) : watchdog
resourceOve… | scalar | Enumeration | .1.3.6.1.4.1.351.110.2.1.8 |
| lineModuleType mandatory This object contains the Line Module(back card) type.
Physically it is behind the backplane, normally with
connectors for physical devices.
These are specific to the front or func… | scalar | Enumeration | .1.3.6.1.4.1.351.110.2.1.9 |