configChangeGrandParentObjectIndex

BASIS-GENERIC-MIB · .1.3.6.1.4.1.351.110.2.1.34
MIB view Table view

Object

scalar mandatory Integer32 
Grand Parent object index, could be
- line index
          
This object will indicate the index of the immediate
higher level object (line) of configChangeParentObjectIndex.
This object is applicable only when configChangeParentObjectIndex 
represents a port index.
          
Following specifies the mapping between the 
configChangeParentObjectIndex and its corresponding
configChangeGrandParentObjectIndex.
          
When the 'Port Configuration Change' bit is set 
the configChangeGrandParentObjectIndex will represent
a 'Line Index' which in turn has the following
special meaning in FRSM-2CT3 cards.
          
- configChangeParentObjectIndex range between 1..56
 indicates that the configuration change refers to the DS1 line
 index. A value of (128 + n) refers to DS3 line index 
 numbered 'n'.
          
This object is applicable only in traps.
A GET on this may not return a useful result.
          
This object is not applicable to MGX 8850 
release 1.x.x and MGX8220.

Context

MIB
BASIS-GENERIC-MIB
OID
.1.3.6.1.4.1.351.110.2.1.34
Type
scalar
Access
readonly
Status
mandatory
Parent
cardInformation
Siblings
35

Syntax

Integer32

Values & Constraints

Object Constraints
range: 1-1024

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
moduleSlotNumber mandatory
Slot number this card is present
scalarInteger32.1.3.6.1.4.1.351.110.2.1.1
lineModuleDescription mandatory
This object contains description of the line module.
scalarOctetString.1.3.6.1.4.1.351.110.2.1.10
lineModuleSerialNum mandatory
This object contains Serial number of the line module.
scalarOctetString.1.3.6.1.4.1.351.110.2.1.11
lineModuleHWRev mandatory
This object contains Hardware revision for line module.
scalarOctetString.1.3.6.1.4.1.351.110.2.1.12
lineModuleFWRev mandatory
Firmware revision for line module. The current version does not have any firmware, hence will always contains zero length octet string.
scalarOctetString.1.3.6.1.4.1.351.110.2.1.13
lineModuleState mandatory
line module status.
scalarEnumeration.1.3.6.1.4.1.351.110.2.1.14
moduleTrapAlarmSeverity mandatory
This object is sent to managers as part of all Trap PDUs, to determine the module alarm severity. An implementation may not support all the possible values. The Possi…
scalarEnumeration.1.3.6.1.4.1.351.110.2.1.15
mibVersionNumber mandatory
MIB version number. Updated when any part of the MIB changes.
scalarInteger32.1.3.6.1.4.1.351.110.2.1.16
configChangeTypeBitMap mandatory
Configuration change Type BitMap bit 0 set = Card Configuration Change bit 1 set = Line Configuration Change bit 2 set = Port Configuration Change bit 3 set = Chan Configuration C…
scalarInteger32.1.3.6.1.4.1.351.110.2.1.17
configChangeObjectIndex mandatory
Configuration change object index, could be line number or port number or channel number depends on the type bitmap, for port resouce partition change (bit 17), this index is act…
scalarInteger32.1.3.6.1.4.1.351.110.2.1.18
configChangeStatus mandatory
This object is applicable only for traps. The SNMP operation may not be meaningful. The value contained in this object is same as the value of the other objects which a…
scalarInteger32.1.3.6.1.4.1.351.110.2.1.19
functionModuleType mandatory
This object holds the type of the card. The card can type is for Processor module as well as service module.
scalarEnumeration.1.3.6.1.4.1.351.110.2.1.2
cardIntegratedAlarmBitMap mandatory
Bit position represents the different types of alarm for ASC: bit 0: ShelfFunctionModuleState (BNM only) (failed/boot/mismatch/heldinReset) bit 1: Lin…
scalarInteger32.1.3.6.1.4.1.351.110.2.1.20
cleiCode mandatory
Common Language Equipment(CLEI) Code.
scalarOctetString.1.3.6.1.4.1.351.110.2.1.21
macAddress mandatory
Ethernet address (base address) stored in NVRAM, entered by manfacturing.
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.351.110.2.1.22
macAddrBlkSize mandatory
The MAC address block size, entered by manufacturing.
scalarInteger32.1.3.6.1.4.1.351.110.2.1.23
finalTestTechnician mandatory
The Final Test Technician Employee Identification Number.
scalarOctetString.1.3.6.1.4.1.351.110.2.1.24
hwFailures mandatory
Hardware failure code.
scalarInteger32.1.3.6.1.4.1.351.110.2.1.25
hwHistory mandatory
RMA Test History - RMA Failure Code.
scalarInteger32.1.3.6.1.4.1.351.110.2.1.26
secLineModuleType mandatory
This object contains the type of secondary line module(back card). Physically it is the bottom card behind the backplane. Normally with connectors for physical devices. These ar…
scalarEnumeration.1.3.6.1.4.1.351.110.2.1.27
secLineModuleDescription mandatory
Description of the Secondary line module. This Object is applicable only to selected MGX switches.
scalarOctetString.1.3.6.1.4.1.351.110.2.1.28
secLineModuleSerialNum mandatory
Serial number of the secondary(bottom) line module. This object is applicable only to selected MGX switches.
scalarOctetString.1.3.6.1.4.1.351.110.2.1.29
functionModuleDescription mandatory
Describes the card
scalarOctetString.1.3.6.1.4.1.351.110.2.1.3
secLineModuleHWRev mandatory
Hardware revision for secondary (bottom) line module This object is applicable only to selected MGX switches.
scalarOctetString.1.3.6.1.4.1.351.110.2.1.30
secLineModuleFWRev mandatory
Firmware revision for Secondary line module This object is applicable only to selected MGX switches. If there is no Firmware revision, then this object returns 0.
scalarOctetString.1.3.6.1.4.1.351.110.2.1.31
secLineModuleState mandatory
line module status of secondary (bottom) back card. This object is applicable only to selected MGX switches.
scalarEnumeration.1.3.6.1.4.1.351.110.2.1.32
configChangeParentObjectIndex mandatory
Parent object index, could be - line index - port index This object will indicate the index of the immediate higher level object (line or port) of configChangeObjectInd…
scalarInteger32.1.3.6.1.4.1.351.110.2.1.33
configChangeSMSpecificObject mandatory
configChangeSMSpecificObject is a generic object which is Service Module Specific. It can be used for different purposes in different cards. The usage of the same with regard …
scalarInteger32.1.3.6.1.4.1.351.110.2.1.35
transId mandatory
Per card transaction ID. This object is used to keep track of configuration change on the card. The transId will be incremented by one for every configuration change on the card.
scalarInteger32.1.3.6.1.4.1.351.110.2.1.36
functionModuleSerialNum mandatory
Serial number of the function Module.
scalarOctetString.1.3.6.1.4.1.351.110.2.1.4
functionModuleHWRev mandatory
Hardware revision number for function Module.
scalarOctetString.1.3.6.1.4.1.351.110.2.1.5
functionModuleFWRev mandatory
Firmware revision number of the function Module.
scalarOctetString.1.3.6.1.4.1.351.110.2.1.6
functionModuleState mandatory
This object holds the status of a card in a particular shelf-slot. The possible values are : nocard(1) : card not present. standby(2) : card in st…
scalarEnumeration.1.3.6.1.4.1.351.110.2.1.7
functionModuleResetReason mandatory
Last reason for card to reset. The possible values are : powerUp(1) : power up parityError(2) : parity error watchDog(3) : watchdog resourceOve…
scalarEnumeration.1.3.6.1.4.1.351.110.2.1.8
lineModuleType mandatory
This object contains the Line Module(back card) type. Physically it is behind the backplane, normally with connectors for physical devices. These are specific to the front or func…
scalarEnumeration.1.3.6.1.4.1.351.110.2.1.9