cardIntegratedAlarmBitMap

Bit position represents the different types of alarm
for ASC:
       bit 0: ShelfFunctionModuleState (BNM only)
               (failed/boot/mismatch/heldinReset)
       bit 1: LineModuleState (BNM only) (notPresent/invalid)
       bit 2: ASMPhysicalAlarmState (BNM only)
       bit 3: ATMLMIFailure (ASC only)
       bit 4: LineAlarmState (BNM only)
       bit 5: LineStatisticalAlarmState (BNM only)
       bit 6: PLCPAlarmState (BNM only)
       bit 7: PLCPStatisticalAlarmState (BNM only)
       bit 8: SmConnectionFailureAlarm
for SM:
       bit 0: ShelfFunctionModuleState
               (failed/boot/mismatch/heldinReset)
       bit 1: LineModuleState  (notPresent/invalid)
       bit 2: PortLMIFailure
       bit 3: LineAlarmState
       bit 4: LineStatisticalAlarmState
       bit 5: FrameRelayPortState (RemoteLoopback/
                                   FailedDueToLine/
                                   FailedDueToSig)
       bit 6: ChannelState
          
for PXM/SRM Only (MGX8850 Platfrom):
	Only those marked with SRM are valid for both PXM/SRM.
       The rest are valid only for PXM.
	bit 0	: ShelfFunctionModuleState
	bit 1	: Backcard Line Module		(SRM/PXM)
	     	  This Alarm is generated when the Line Module
                 (Trunk Backcard) is removed or goes to a mismatch
                 state(or backcard type is unknown).
	bit 2  	: Backcard UIModule
		  This Alarm is generated when the UI backcard is
                 removed or goes to a mismatch state
                 (or backcard type is unknown).
	bit 3  	: ASM Physical Alarm
		  This specifies whether any of the 
                 environmental monitoring components like 
                 Temperature, Voltage Supply, Fan Speed
                 have gone into alarm.
	bit 4	: ATM LMI Failure 
	bit 5	: Line Alarm	(SRM/PXM)
	bit 6	: Line Statistical Alarm	(SRM/PXM)
	bit 7  	: Lines Alarm	(SRM/PXM)
	bit 8   : PLCP Alarm
	bit 9   : PLCP Statistical Alarm
	bit 10 	: Connections exist on removed SM
	bit 11 	: Disk related Failure on first PXM slot
	bit 12  : Disk related Failure on second PXM slot
		  The Disk Alarms are generated when any of the
                 file operations on Disk like open,read,write,
                 lseek etc fail. 
		VSM Alarms
	bit 13 	: Port LMI Failure
	bit 14  : Port State Alarm
	bit 15	: Channel Shelf Alarm
          
	bit 16	: Taskmon Task Suspended
	bit 17	: Excess Power Consumption
	bit 30  : bit set(1) major alarm, else (0) minor alarm

MIB

BASIS-GENERIC-MIB

OID

.1.3.6.1.4.1.351.110.2.1.20

Type

scalar

Access

readonly

Status

mandatory

Parent

cardInformation

Siblings

35