endptSGVERSION
Avaya-96xxIPTelephone-MIB ·
.1.3.6.1.4.1.6889.2.69.2.9.42
Object
scalar
RFC1213-MIBDisplayString
Security Gateway Version. This variable returns the version information, if any, of the Security Gateway with wich the telephone has a VPN tunnel established, else NULL.
Context
- MIB
- Avaya-96xxIPTelephone-MIB
- OID
.1.3.6.1.4.1.6889.2.69.2.9.42- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- endptVPN
- Siblings
- 45
Syntax
RFC1213-MIBDisplayString
- Source
- RFC1213-MIBDisplayString
- Base type
OctetString
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| endptALWCLRNOTIFY ISAKP Notification flag. This variable returns 1 if
unencrypted ISAKMP Notification Payloads will be accepted, else 0. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.2.9.1 |
| endptEXTIPADD Endpoint External IP address. This variable returns a 4-octet string specifying the
endpoint's current outer IP address when in VPN mode. | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.6889.2.69.2.9.10 |
| endptEXTNETMASK External Subnet mask. This variable returns a 4-octet string specifying the subnet
mask to be used outside of the VPN tunnel when in VPN mode. | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.6889.2.69.2.9.11 |
| endptIKECONFIGMODE IKE Configuration flag. This variable returns 1 if the ISAKMP configuration method
to be used, else 2.. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.2.9.12 |
| endptIKEDH In-Use Diffie-Hellman Group for IKE SA. This variable returns the negotiated IKE Phase 1
DH Group number. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.2.9.13 |
| endptIKEDHGRP Proposed Diffie-Hellman Group for IKE SA. This variable returns 1 if the DH Group
Description proposed for IKE Phase 1 is the First Oakley Group, 2 if the proposal is for the
Sec… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.2.9.14 |
| endptIKEID IKE Phase 1 identity, This variable returns the identity (also known as in XAUTH as
group name) used during IKE Phase 1 negotiation. | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.6889.2.69.2.9.15 |
| endptIKEIDTYPE IKE SA identification type. This varable returns 1 if the Identification Type used for
IKE Phase 1 is ID_IPV4_ADDR, 2 if the ID Type is ID_FQDN, 3 if the ID Type is ID_USER_FQDN,… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.2.9.16 |
| endptIKEOVERTCP IKE TCP usage policy. This variable returns 0 if IKE is only to use UDP, 1 if TCP is to be
tried after an IKE times out using UDP, or 2 if only TCP is to be used. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.2.9.17 |
| endptIKEP1AUTH In-Use IKE Phase 1 authentication algorithm. This variable returns 1 if MD5 was negotiated,
and 2 if SHA was negotiated. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.2.9.18 |
| endptIKEP1AUTHALG Proposed IKE Phase 1 authentication algorithm. This variable returns 0 if if either hash
algorithm is acceptable for IKE Phase 1, 1 if MD5 is proposed, or 2 if SHA is proposed:. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.2.9.19 |
| endptAUTHTYPE VPN Authentication Method. This variable returns 3 if the VPN authentication
method is Pre-Shared Key (PSK); 4 if the method is PSK with XAUTH, 5 if the method is RSA
signatures … | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.2.9.2 |
| endptIKEP1ENC In-Use IKE Phase 1 encryption algorithm. This variable returns 1 if AES-CBC-128 was
negotiated, 2 if 3DES-CBC was negotiated, 3 if DES-CBC was negotiated, 4 if AES-CBC-192 was
neg… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.2.9.20 |
| endptIKEP1ENCALG IKE Phase 1 encryption algorithm. This variable returns.0 if any encryption algoithm
is acceptable for IKE Phase 1, 1 if AES-CBC-128 is proposed, 2 if 3DES-CBC is proposed, 3 if… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.2.9.21 |
| endptIKEP1LIFESEC IKE Security Association lifetime. This variable returns the proposed number of seconds
for the SA Life Duration for IKE Phase 1. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.2.9.22 |
| endptIKEP2AUTH In-Use IKE Phase 2 authentication algorithm. This variable returns 1 if MD5 was
negotiated, and 2 if SHA was negotiated. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.2.9.23 |
| endptIKEP2AUTHALG IKE Phase 2 authentication algorithm. This variable returns 0 if either hash algorithm
is acceptable for IKE Phase 1, 1 if MD5 is proposed, or 2 if SHA is proposed:. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.2.9.24 |
| endptIKEP2ENC In-Use IKE Phase 2 encryption algorithm. This variable returns 1 if AES-CBC-128 was
negotiated, 2 if 3DES-CBC was negotiated, 3 if DES-CBC was negotiated, 4 if AES-CBC-192
was neg… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.2.9.25 |
| endptIKEP2ENCALG IKE Phase 1 encryption algorithm. This variable returns.0 if any encryption algoithm
is acceptable for IKE Phase 1, 1 if AES-CBC-128 is proposed, 2 if 3DES-CBC is proposed, 3 if… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.2.9.26 |
| endptIKEP2LIFESEC IPsec Security Association lifetime. This variable returns the proposed number of seconds
for the SA Life Duration for IKE Phase 2. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.2.9.27 |
| endptIKESALIFEKB IKE Security Association KB Lifetime. This variable returns the IKE SA lifetime in kilobytes. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.2.9.28 |
| endptIKESALIFESEC IKE Security Association time Lifetime. This variable returns the IKE SA lifetime in seconds. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.2.9.29 |
| endptCFGPROF VPN Configuration Profile. This variable returns 2 if the VPN Configuration Profile
is based on Checkpoint Security Gateway, 3 if the profile is based on Cisco PSK with XAUTH,
5 … | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.2.9.3 |
| endptIKETRANSPORT In-Use IKE transport protocol. This variable returns 0 if IKE is not in use, 1 if UDP is being
used for IKE transport, or 2 if TCP is being used for IKE transport. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.2.9.30 |
| endptIKEXCHGMODE IKE Phase 1 negotiation mode. This variable returns 1 if the IKE Phase 1 exchange usesd is
Aggressive Mode, else 2 for Main Mode. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.2.9.31 |
| endptIPSECSALIFEKB IPsec Security Association KB Lifetime. This variable returns the IPsec SA lifetime in
kilobytes. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.2.9.32 |
| endptIPSECSALIFESEC IPsec Security Association time Lifetime. This variable returns the IPsec SA lifetime
in seconds. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.2.9.33 |
| endptIPSECSUBNET VPN Tunnel IP Address ranges. This variable returns the IP address ranges that will use
the VPN tunnel, with 0.0.0.0/0 meaning all IP addresses. | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.6889.2.69.2.9.34 |
| endptNORTELAUTH Nortel gateway authentication method. If Nortel gateway user authentication is to
be used, this variable returns 1 if a local username and password are to be used; 2 if a RADIUS… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.2.9.35 |
| endptPFSDH In-Use Diffie-Hellman Group for IPsec SA. This variable returns the negotiated IKE PFS
DH Group number. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.2.9.36 |
| endptPFSDHGRP Diffie-Hellman Group for IPsec SA. This variable returns 1 if the DH Group Description
proposed for IPSec SA is the First Oakley Group, 2 if the proposal is for the Second Oakle… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.2.9.37 |
| endptPSWDTYPE VPN Password Permissions. This variable returns 1 if the password may be alphanumeric
and is to be stored in non-volatile memory as the value of NVVPNPSWD, 2 if the password may … | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.2.9.38 |
| endptSGINUSE VPN Security Gateway address. This variable returns a 4-octet string specifying the IP
address of the VPN Security Gateway in use, else 0.0.0.0. | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.6889.2.69.2.9.39 |
| endptCOPYTOS TOS Copy flag. This variable returns 1 if the value of the TOS bits will be copied
from the inner IP header to the outer IP header, else this variable returns 2 and the TOS
bits… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.2.9.4 |
| endptSGIP VPN Security Gateway list. This variable returns the list of VPN security gateway IP
addresses available to the telephone. | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.6889.2.69.2.9.40 |
| endptSGVENDOR VPN Security Gateway Vendor. This variable returns 1 if the IKE implementation matches
Juniper/NetScreen, 2 if it matches Cisco, 3 if it matches Check Point/Nokia, 5 if it matche… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.2.9.41 |
| endptVPNMODE VPN Support Specification. This variable returns 1 if VPN functionality is enabled, else 0. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.2.9.43 |
| endptVPNUSER VPN User Name. This variable returns the user name to be used during authentication. | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.6889.2.69.2.9.44 |
| endptVPNUSERTYPE VPN User Name Permissions. This variable returns 1 if the user can change the VPN username,
else 0. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.2.9.45 |
| endptXAUTH XAUTH status. This variable returns 2 if XAUTH is disabled, else 1. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.2.9.46 |
| endptDHCPSRVR List of DHCP server addresses. This variable returns a sequence of zero or more
IP addresses, in dotted-decimal format and separated by commas, of enterprise DHCP
servers from … | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.6889.2.69.2.9.5 |
| endptDROPCLEAR Clear IPSec packet treatment. This variable returns 1 if received unencrypted
(clear) IPsec packets are to be dropped, else 0 | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.2.9.6 |
| endptENCAPS Encapsulation Port Numbers. This variable returns 0 if negotiation of NAT
traversal is as specified in IETF RFC 3947 (except that IKE negotiation begins with a
source port of 2… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.2.9.7 |
| endptEXTDNSSRVR List of external DNS server addresses. This variable returns a sequence of IP
addresses, in dotted-decimal format and separated by commas, of DNS servers available for
use outsi… | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.6889.2.69.2.9.8 |
| endptEXTGIPADD List of external router addresses. This variable returns a sequence of IP addresses,
in dotted-decimal format and separated by commas, of routers available for use outside of
the… | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.6889.2.69.2.9.9 |