endptNVPHY1STAT

Avaya-96xxIPTelephone-MIB · .1.3.6.1.4.1.6889.2.69.2.2.17
MIB view Table view

Object

scalar SNMPv2-SMIInteger32 
NVM Ethernet line interface status.  This 
variable returns 0 if the endpoint's Ethernet line 
interface in NVM iscurrently NOT enabled, 1 if the 
Ethernet line interface in NVM is currently for 
auto-negotiation, 2 for 10Mbps half-duplex, 3 for 
10Mbps full-duplex, 4 for 100Mbps half-duplex, and
5 for 100Mbps full-duplex.

Context

MIB
Avaya-96xxIPTelephone-MIB
OID
.1.3.6.1.4.1.6889.2.69.2.2.17
Type
scalar
Access
readonly
Status
current
Parent
endptNVM
Siblings
26

Syntax

SNMPv2-SMIInteger32
Source
SNMPv2-SMIInteger32
Base type
Integer32

Values & Constraints

Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
endptNVAGCHAND
Non-Volatile Memory (NVM)Handset AGC status. This variable returns 1 if the endpoint's handset Automatic Gain Control capability in NVM is currently enabled, else 0.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.6889.2.69.2.2.1
endptNVFILESRVR obsolete
NVM File server address. This variable returns a 4-octet string specifying the IP address of the file server as stored in NVM.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.6889.2.69.2.2.10
endptNVGIPADD
NVM Router address. This variable returns a 4- octet string specifying the IP address of the router as stored in NVM.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.6889.2.69.2.2.11
endptNVIPADD
NVM IP address. This variable returns a 4-octet string specifying the endpoint's IP address stored in NVM.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.6889.2.69.2.2.12
endptNVL2Q
NVM 802.1Q flag. This variable returns 0 if the Layer 2 802.1Q framing parameter in NVM is set to 'auto', 1 if it is set to on/enabled, else 2 for off/disabled.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.6889.2.69.2.2.13
endptNVL2QVLAN
NVM VLAN Identifier. This variable returns an integer between 0 and 4094 inclusive specifying the Layer 2 802.1Q VLAN Identifier value stored in NVM.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.6889.2.69.2.2.14
endptNVLOGSTAT
NVM Event Log flag. This variable returns 0 if the endpoint's event logging capability in NVM is currently NOT enabled, else 1.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.6889.2.69.2.2.15
endptNVNETMASK
NVM Subnet mask. This variable returns a 4-octet string specifying the subnet mask as stored in NVM.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.6889.2.69.2.2.16
endptNVPHY2STAT
NVM Secondary Ethernet interface setting. This variable returns 0 if the endpoint's secondary Ethernet interface in NVM is currently NOT enabled(or none exists), 1 if the hub …
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.6889.2.69.2.2.18
endptNVSSON
NVM Site-specific option number. This variable returns an integer between 128 and 254 inclusive, specifying the SSON stored in NVM. The default is 176.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.6889.2.69.2.2.19
endptNVAGCHEAD
NVM Headset AGC status. This variable returns 1 if the endpoint's headset Automatic Gain Control capability in NVM is currently enabled, else 0.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.6889.2.69.2.2.2
endptNVVLANTEST
NVM VLAN pause parameter. This variable returns the number of seconds stored in NVM for the endppoint to wait for a DHCPOFFER message when using a non-zero VLAN ID. Valid valu…
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.6889.2.69.2.2.20
endptNVLANGFILE
Language file. This variable returns the name of the language file in non-volatile memory.
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.6889.2.69.2.2.21
endptNVTRUSTLIST
List of trusted certificates. This variable returns 0-255 ASCII characters: 0 or more filenames or URLs separated by commas and without intervening spaces, containing the list of …
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.6889.2.69.2.2.22
endptNVVOXFILE
Voice language file. This variable returns 0-32 ASCII characters: 0 or 1filename, identifying the voice language file, if any, in non-volatile memory.
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.6889.2.69.2.2.23
endptNVRINGTONESTYLE
Ringing style identifier. This variable returns the number of seconds stored in NVM for the endppoint to wait for a DHCPOFFER message when using a non-zero VLAN ID. Valid val…
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.6889.2.69.2.2.24
endptNVSBM24BRIGHTNESS1
SBM24 backlight level. This variable returns the value of the backlight brightness for the first SBM24 attached, to the telephone, if any. Valid values are integers from 1 to 5 …
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.6889.2.69.2.2.25
endptNVSBM24BRIGHTNESS2
SBM24 backlight level. This variable returns the value of the backlight brightness for the second SBM24 attached, to the telephone, if any. Valid values are integers from 1 to 5…
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.6889.2.69.2.2.26
endptNVSBM24BRIGHTNESS3
SBM24 backlight level. This variable returns the value of the backlight brightness for the third SBM24 attached, to the telephone, if any. Valid values are integers from 1 to 5 …
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.6889.2.69.2.2.27
endptNVAGCSPKR
Speakerphone AGC status. This variable returns 1 if the endpoint's speakerphone Automatic Gain Control capability in NVM is currently enabled, else 0.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.6889.2.69.2.2.3
endptNVALERT obsolete
Alerting Mode flag. This variable returns 1 if the alerting mode setting in non-volatile memory is enabled, else 0.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.6889.2.69.2.2.4
endptNVAUTH
Script file authentication flag. This variable returns 1 if the endpoint must authenticate script files, else 0.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.6889.2.69.2.2.5
endptNVBRIGHTNESS
Display Brightness setting. This variable returns the value of the display contrast setting in non-volatile memory. Range is 0-5, with 4 the default.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.6889.2.69.2.2.6
endptNVCALLSRVR obsolete
NVM IP address of call server if manually entered. Default is four zeroes.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.6889.2.69.2.2.7
endptNVCHADDR
Manually-entered DHCP chaddr value. This variable returns a manually-entered value for the DHCP chaddr field as stored in non-volatile memory, if any. A Hexadecimal value with …
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.6889.2.69.2.2.8
endptNVCONTRAST
Display Contrast setting. This variable returns the value of the display contrast setting in non-volatile memory. Range is 0-15, with 8 the default.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.6889.2.69.2.2.9