endptLOGSRVR
Avaya-96xxIPTelephone-MIB ·
.1.3.6.1.4.1.6889.2.69.2.1.41
Object
scalar
RFC1213-MIBDisplayString
Event Log server address. This variable
returns at most one IP address, in dotted-decimal
or DNS format, of the server to be used for event
logging. This function is intended for Avaya use,
in debugging if necessary.
Context
- MIB
- Avaya-96xxIPTelephone-MIB
- OID
.1.3.6.1.4.1.6889.2.69.2.1.41- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- endptID
- Siblings
- 95
Syntax
RFC1213-MIBDisplayString
- Source
- RFC1213-MIBDisplayString
- Base type
OctetString
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| endptAGCHAND Handset AGC status. This variable returns 1
if the endpoint's handset Automatic Gain Control
capability is currently enabled, else 0. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.2.1.1 |
| endptCNASRVR CNA server addresses. This variable returns zero
or more Chatter server addresses for network analysis, in
dotted decimal or DNS format. | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.6889.2.69.2.1.10 |
| endptCODECR Receive codec. This variable returns the
designation of the Receive codec currently in use. | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.6889.2.69.2.1.11 |
| endptCODECT Transmit codec. This variable returns the
designation of the Transmit codec currently in use. | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.6889.2.69.2.1.12 |
| endptDHCPLEASEREBIND Rebind time of IPADD lease. This
variable returns an unsigned integer specifying
the length of time at which to rebind the IPADD
lease, in seconds as received by DHCP option 59… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.2.1.13 |
| endptDHCPLEASERENEW Renewal time of IPADD lease. This
variable returns an unsigned integer specifying
the length of time at which to renew the IPADD
lease, in seconds as received by DHCP option 58… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.2.1.14 |
| endptDHCPLEASETIME Duration of IPADD lease. This variable
returns an unsigned integer specifying the length
of time of the IPADD lease, in seconds as received
by DHCP option 51. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.2.1.15 |
| endptDNSSRVR List of DNS server addresses. This variable
returns a sequence of IP addresses, in dotted-decimal
format and separated by commas, of DNS servers
available for use. | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.6889.2.69.2.1.16 |
| endptDOMAIN List of DNS domain labels. This variable
returns a sequence of labels, separated by periods, for
use as the highest-level domain in resolving DNS names
in system values. | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.6889.2.69.2.1.17 |
| endptDOT1X Current value for 802.1X handling. This variable returns
0 if Supplicant operation is Enabled, 1 if Supplicant operation is
Enabled with proxy Logoff, and 2 if Supplica… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.2.1.18 |
| endptDSCPAUD DSCP for audio. This variable specifies the
Differentiated Services Code Point for audio
currently in use (between 0 and 63 inclusive). | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.2.1.19 |
| endptAGCHEAD Headset AGC status. This variable returns 1
if the endpoint's headset Automatic Gain Control
capability is currently enabled, else 0. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.2.1.2 |
| endptDSCPBBE DSCP BBE priority value. This variable returns
an integer between 0 and 7 inclusive specifying the
far-end endpoint's DiffServ Better than Best Effort audio
priority value. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.2.1.20 |
| endptDSCPSIG DSCP for signaling. This variable specifies
the Differentiated Services Code Point for signaling
currently in use (between 0 and 63 inclusive). | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.2.1.21 |
| endptDSPVERSION DSP Version. This variable returns a string
of up to 10 characters, that identifies the version of
the DSP firmware in the endpoint. | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.6889.2.69.2.1.22 |
| endptFEIPADD Audio endpoint address. This variable returns
a 4-octet string specifying the address of the far-end
audio endpoint currently in use. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.6889.2.69.2.1.23 |
| endptFEPORT Audio endpoint port number. This variable returns
the far-end endpoint's transport layer port number for
audio, currently in use. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.2.1.24 |
| endptGIPADD List of router addresses. This variable returns a
sequence of IP addresses, in dotted-decimal format and
separated by commas, of routers available for use. | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.6889.2.69.2.1.25 |
| endptGIPINUSE Router address. This variable returns
a 4-octet string specifying the IP address of
the router currently in use. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.6889.2.69.2.1.26 |
| endptGROUP Group identifier. This variable returns the
integer corresponding to the current group identifier. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.2.1.27 |
| endptHTTPDIR HTTP server Directory. This variable returns
the path used in formation of the URI for HTTP GET
operations. | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.6889.2.69.2.1.28 |
| endptHTTPSRVR HTTP server IP addresses. This variable
returns a comma-separated list of HTTP server IP
addresses available for use, in dotted-decimal or
DNS format. | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.6889.2.69.2.1.29 |
| endptAGCSPKR Speakerphone AGC status. This variable returns
1 if the endpoint's speakerphone Automatic Gain Control
capability is currently enabled, else 0. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.2.1.3 |
| endptHTTPUSED HTTP initialization server IP address. This
variable returns a 4-octet IP address for the HTTP server
used during initialization (all zeroes if no server
successfully used dur… | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.6889.2.69.2.1.30 |
| endptICMPDU Current value for ICMP Destination message handling.
This variable returns 0 if the telephone does not transmit ICMP
Destination Unreachable messages are not transmitted; 1 if s… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.2.1.31 |
| endptICMPRED Current value for ICMP Redirect message handling. This
variable returns 1 if received Redict messages are handled as
specified in RFC 1122, Sections 3.2.2.2 and 3.3.1.2, else 0.
… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.2.1.32 |
| endptIPADD Endpoint IP address. This variable returns a 4-octet string
specifying the endpoint's current IP address. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.6889.2.69.2.1.33 |
| endptJMSEC Jitter buffer size. This variable returns the number of
milliseconds of delay added to compensate for network jitter, from
0-300 milliseconds. The default is 10. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.2.1.34 |
| endptL2Q 802.1Q framing flag. This variable returns 0
if the Layer 2 802.1Q framing parameter is set to
'auto', 1 if it is set to on/enabled, else 2 for
off/disabled. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.2.1.35 |
| endptL2QAUD Audio priority. This variable returns an
integer between 0 and 7 inclusive specifying the
current Layer 2 802.1Q audio priority value. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.2.1.36 |
| endptL2QSIG Signaling priority. This variable returns
an integer between 0 and 7 inclusive specifying the
current Layer 2 802.1Q signaling priority value. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.2.1.37 |
| endptL2QSTAT 802.1Q tagging flag. This variable returns 0
if the Layer 2 802.1Q tagging parameter is currently
OFF, else 1. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.2.1.38 |
| endptL2QVLAN Administered Telephone VLAN Identifier. This variable
returns an integer between 0 and 4094 inclusive specifying the
administered Layer 2 802.1Q VLAN Identifier value. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.2.1.39 |
| endptAPPINUSE Application file name. This variable returns
the name of the application file in the endpoint. | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.6889.2.69.2.1.4 |
| endptL2QVLANINUSE Telephone VLAN Identifier in use. This variable
returns an integer between 0 and 4094 inclusive specifying
the current Layer 2 802.1Q VLAN Identifier value. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.2.1.40 |
| endptMACADDR MAC address. This variable returns a 6-octet
string specifying the endpoint's MAC address. | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.6889.2.69.2.1.42 |
| endptMODEL Model identifier. This variable returns
a string of up to 8 ASCII characters. | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.6889.2.69.2.1.43 |
| endptNETMASK Subnet mask. This variable returns a
4-octet string specifying the subnet mask
currently in use. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.6889.2.69.2.1.44 |
| endptPHONECC Phone comcode. This variable returns a string
of up to 9 numerical characters, specifying the comcode
of the endpoint itself. | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.6889.2.69.2.1.45 |
| endptPHONESN Housing serial number. This variable
returns a string of up to 18 ASCII characters,
specifying the serial number on the outside
of the endpoint's housing. | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.6889.2.69.2.1.46 |
| endptPHY1DUPLEX Ethernet line interface duplex setting. This variable
returns 1 if the interface is half-duplex and 2 if the interface
is full duplex. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.2.1.47 |
| endptPHY1SPEED Ethernet interface speed. This variable
returns a string specifying the endpoint's Ethernet
interface speed in Mbps: '100' or '10'. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.2.1.48 |
| endptPHY1STAT Ethernet line interface status. This
variable returns 0 if the endpoint's Ethernet line
interface is currently NOT enabled, 1 if the Ethernet
line interface is currentl… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.2.1.49 |
| endptAPPNAME Application file ID. This variable returns
a string specifying the system-specific application
file that should be used for telephone operation. | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.6889.2.69.2.1.5 |
| endptPHY2DUPLEX Secondary Ethernet interface duplex setting. This
variable returns 0 if no link is established, 1 if the interface
is half-duplex,and 2 if the interface is full duplex. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.2.1.50 |
| endptPHY2PRIO Secondary Ethernet interface Layer 2 priority. This
variable returns 0 through 7, and is used with endptVLANSEP.
The default is 0. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.2.1.51 |
| endptPHY2SPEED Secondary Ethernet speed. This variable
returns a string specifying the endpoint's Ethernet
interface speed in Mbps: '100' or '10' or '0'. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.2.1.52 |
| endptPHY2STAT Secondary Ethernet interface status. This
variable returns 0 if the endpoint's Secondary Ethernet
interface is currently NOT enabled, 1 if the Secondary Ethernet
… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.2.1.53 |
| endptPHY2VLAN Secondary Ethernet interface VLAN ID. This
variable returns an integer between 0 and 4094 inclusive
specifying the current Layer 2 802.1Q VLAN Identifier
value f… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.2.1.54 |
| endptPORTAUD Transport-layer audio port. This variable returns
the endpoint's transport layer port number for audio,
currently in use. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.2.1.55 |
| endptPROCPSWD Local Procedure Password. This variable returns
0 if the Local Procedure Password is null, else 1. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.2.1.56 |
| endptPROCSTAT Local Procedure flag. This variable returns 0 if
Local Procedures are currently allowed for this telephone,
else 1. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.2.1.57 |
| endptPWBCC PWB comcode. This variable returns
a string of up to 9 numerical characters,
specifying the comcode or version number of
the printed wiring board of the endpoint. | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.6889.2.69.2.1.58 |
| endptPWBSN PWB serial number. This variable
returns a string of up to 18 ASCII characters,
specifying the serial number on the endpoint's
printed wiring board, or N/A if the board has
… | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.6889.2.69.2.1.59 |
| endptBAKLIGHTOFF Backlight idle timer setting. This variable returns
the number of minutes of idle time, after which the
telephone backlightis turned off. Range is 0-999, with a
default of 120.… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.2.1.6 |
| endptRTCPCONT RTCP Control flag. This variable returns
0 if the RTCP control status is off/disabled, else 1. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.2.1.60 |
| endptRTCPFLOW RTCP Flowrate. This variable returns
an integer between 5 and 30 inclusive specifying the
RTCP flowrate in milliseconds. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.2.1.61 |
| endptRTCPMON RTCP Monitor address. This variable returns a
4-octet string specifying the IP address of the RTCP
monitor currently in use. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.6889.2.69.2.1.62 |
| endptRSVPCONT RSVP Control flag. This variable returns
0 if the RSVP control status is off/disabled, else 1. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.2.1.63 |
| endptRSVPRFRSH RSVP Refresh rate. This variable returns
an integer between 1 and 3600 inclusive specifying the
RSVP refresh rate in milliseconds. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.2.1.64 |
| endptRSVPRTRY RSVP Failed Retry flag. This variable returns
0 if the RSVP Failed Retry Reservation control status is
off/disabled, else 1. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.2.1.65 |
| endptRSVPPROF RSVP profile flag. This variable returns
0 if the RSVP profile is guaranteed, else 1 for controlled
load. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.2.1.66 |
| endptSIG Signaling protocol download flag. This variable
returns the integer corresponding to the current
signaling protocol. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.2.1.67 |
| endptSNMPADD SNMP source addresses. This variable returns
one or more allowable source IP addresses for SNMP queries,
in dotted decimal or DNS format. | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.6889.2.69.2.1.68 |
| endptSTATIC Static programming override flag. This variable
returns the integer corresponding to the current level of
override permissions for static programming. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.2.1.69 |
| endptBOOTNAME Boot code file ID. This variable returns a string
specifying the boot code
file used to initiate telephone operation. | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.6889.2.69.2.1.7 |
| endptTLSSRVR TLS server addresses. This variable returns zero
or more Transport Layer Security server addresses for
software download, in dotted decimal or DNS format. | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.6889.2.69.2.1.70 |
| endptTLSUSED TLS server address used. This variable returns the
TLS server address from TLSSRVR used, if any, during
initialization, or all zeroes if no TLS server was used. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.6889.2.69.2.1.71 |
| endptTMSEC Transmit buffer fill level. This variable returns
the transmit buffer minimum fill level, in msec, currently
in use. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.2.1.72 |
| endptVLANLIST VLAN ID list. This variable returns a list of
zero or more VLAN IDs. | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.6889.2.69.2.1.73 |
| endptVLANSEP VLAN separation value. This variable returns 0
if frames received on the secondary Ethernet interface are
unchanged before forwarding; else 1, which is the default. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.2.1.74 |
| endptFONT Font file identifier. This variable returns a text string
with the name of the font file stored in the phone, if any. | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.6889.2.69.2.1.75 |
| endptLANGFILES Language file list. This variable returns a comma-separated
text string listing the language files stored in the phone,
if any. | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.6889.2.69.2.1.76 |
| endptPHNEMERGNUM Emergency Number. This variable returns a telephone number
to be dialed when an Emergency softkey is pressed. | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.6889.2.69.2.1.77 |
| endptAUDIOENV Audio Environment parameter. This variable returns the current value
of AUDIOENV. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.2.1.78 |
| endptAUDIOSTHD Audio Handset Sidetone parameter. This variable returns the current
value of AUDIOSTHD. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.2.1.79 |
| endptBRURI Backup and restore URI. This variable returns
a string specifying the URI used for backup and restore files. | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.6889.2.69.2.1.8 |
| endptAUDIOSTHS Audio Headset Sidetone parameter. This variable returns the current
value of AUDIOSTHS. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.2.1.80 |
| endptBRAUTH Backup/Restore authentication control. This variable returns 0
if the call server IP address and telephone's registration password is NOT
not included as credentials in an Authen… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.2.1.81 |
| endptDHCPINUSE IP address of DHCP server from which phone's IP address was obtained. This
variable returns four zeroes by default or when the telephone is manually programmed. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.6889.2.69.2.1.82 |
| endptDHCPLEASEEXP DHCP lease expiration. This variable returns the time (in seconds) remaining
until the expiration of the current DHCP lease; or 0 if the lease has expired. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.2.1.83 |
| endptDHCPSTD DHCP compliance flag. This variable returns 0 (the default) if the
telephone ignores the DHCP standard and continues using its IP address after its
lease has expired, assuming t… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.2.1.84 |
| endptDHCPT1REM DHCP lease renewal expiration. This variable returns the time (in seconds) until
the start of IP address lease renewal, -1 if the lease is infinite, or 0 if the timer has expired. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.2.1.85 |
| endptDHCPT2REM DHCP lease rebinding expiration. This variable returns the time (in seconds) remaining
until the start of IP address lease renewal, -1 if the lease is infinite, or 0 if the timer … | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.2.1.86 |
| endptDOT1XSTAT 802.1X Supplicant status. This variable returns 0 if 802.1X Supplicant mode is
Disabled; 1 (the default) if the supplicant mode is set to Unicast-only, and 2 if the supplicant
m… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.2.1.87 |
| endptHTTPPORT HTTP port number. This variable returns the TCP port number used for HTTP file downloading. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.2.1.88 |
| endptTLSDIR TLS Server Directory. This variable returns the path that
is prepended to all file names used in HTTPS GET operations. | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.6889.2.69.2.1.89 |
| endptCNAPORT Chatter server port. This variable returns the
Chatter server registration transport-layer port number
(from 0 to 65535; default is 8888). | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.2.1.9 |
| endptTLSPORT TLS server port number. This variable returns
the TCP port number used for HTTPS file downloading. | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.6889.2.69.2.1.90 |
| endptMEMHEAPFREE Heap allocation. This variable returns the number of bytes of
volatile memory currently allocated for, but unused by, the Heap. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.2.1.91 |
| endptSSONCONTENT SSON Content. This variable returns the data portion of the
DHCP site-specific option designated by NVSSON, exactly as received. | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.6889.2.69.2.1.92 |
| endptTLSSRVRID TLS server ID flag. This variable returns 1 if the TLS server
identity is to be checked against its certificate, otherwise 0. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.2.1.93 |
| endptTRUSTCERTS Trusted Certificates list. This variable returns the current
trusted certificates to be downloaded; 0-255 ASCII
characters, 0 or more filenames or URLs separated by commas. | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.6889.2.69.2.1.94 |
| endptVOXFILES Voice language files list. This variable returns the current
list of voice langauge files to be downloaded; 0-255 ASCII
characters, 0 or more filenames separated by commas. | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.6889.2.69.2.1.95 |
| endptGRATARP Gratuitous ARP flag. This variable returns 1 oif gratuitous ARP messages
are to be process; else 0. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.2.1.96 |