endptPROCPSWD
Avaya-46xxIPTelephone-MIB ·
.1.3.6.1.4.1.6889.2.69.1.1.56
Object
scalar
SNMPv2-SMIInteger32
Local Procedure Password. This variable returns 0 if the Local Procedure Password is null, else 1.
Context
- MIB
- Avaya-46xxIPTelephone-MIB
- OID
.1.3.6.1.4.1.6889.2.69.1.1.56- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- endptID
- Siblings
- 83
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| endptMARKET obsolete ID designation. This variable returns a
string specifying 'domestic' or 'export'. | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.6889.2.69.1.1.1 |
| endptESPEED Ethernet interface speed. This variable
returns a string specifying the endpoint's Ethernet
interface speed in Mbps: '100', '10', or '0'. | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.6889.2.69.1.1.10 |
| endptIPADD IP address. This variable returns a
4-octet string specifying the endpoint's current
IP address. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.6889.2.69.1.1.11 |
| endptDHCPLEASETIME Duration of IPADD lease. This variable
returns an unsigned integer specifying the length
of time of the IPADD lease, in seconds as received
by DHCP option 51. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.1.1.12 |
| endptDHCPLEASERENEW Renewal time of IPADD lease. This
variable returns an unsigned integer specifying
the length of time at which to renew the IPADD
lease, in seconds as received by DHCP option … | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.1.1.13 |
| endptDHCPLEASEREBIND Rebind time of IPADD lease. This
variable returns an unsigned integer specifying
the length of time at which to rebind the IPADD
lease, in seconds as received by DHCP option 59. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.1.1.14 |
| endptGIPADD List of router addresses. This variable
returns a sequence of IP addresses, in
dotted-decimal format and separated by commas,
of routers available for use. | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.6889.2.69.1.1.15 |
| endptGIPINUSE Router address. This variable returns
a 4-octet string specifying the IP address of
the router currently in use. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.6889.2.69.1.1.16 |
| endptNETMASK Subnet mask. This variable returns a
4-octet string specifying the subnet mask
currently in use. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.6889.2.69.1.1.17 |
| endptTFTPDIR TFTP server path name. This variable
returns a string of 0-127 ASCII characters,
specifying the path name currently prepended
to file names used in TFTP read operations. | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.6889.2.69.1.1.18 |
| endptTFTPSRVR List of TFTP server addresses. This
variable returns a sequence of IP addresses,
in dotted-decimal orDNS format and separated
by commas, of TFTP servers available for use. | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.6889.2.69.1.1.19 |
| endptMODEL Model identifier. This variable returns
a string of up to 8 ASCII characters. | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.6889.2.69.1.1.2 |
| endptTFTPINUSE TFTP server address. This variable
returns a 4-octet string specifying the IP
address of the TFTP server currently in use
(or all zeroes if no server used successfully
during… | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.6889.2.69.1.1.20 |
| endptBOOTNAME Boot code file ID. This variable
returns a string specifying the boot code
file used to initiate telephone operation. | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.6889.2.69.1.1.21 |
| endptAPPNAME Application file ID. This variable
returns a string specifying the system-specific
application file that should be used for
telephone operation. | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.6889.2.69.1.1.22 |
| endptSSON obsolete Site-specific option number (SSON). This
variable returns an integer between 128 and 254
inclusive, specifying the SSON in use. The
default is 176. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.1.1.23 |
| endptBBURST obsolete Blackburst flag. This variable returns 0
if Blackburst is currently OFF, else 1. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.1.1.24 |
| endptHUBSTAT obsolete Hub flag. This variable has been superseded
by endptPHY2STAT. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.1.1.25 |
| endptDSCPAUD DSCP for audio. This variable specifies the
Differentiated Services Code Point for audio
currently in use (between 0 and 63 inclusive). | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.1.1.26 |
| endptDSCPSIG DSCP for signaling. This variable specifies
the Differentiated Services Code Point for signaling
currently in use (between 0 and 63 inclusive). | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.1.1.27 |
| endptL2Q 802.1Q framing flag. This variable returns 0
if the Layer 2 802.1Q framing parameter is set to
'auto', 1 if it is set to on/enabled, else 2 for
off/disabled. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.1.1.28 |
| endptL2QAUD Audio priority. This variable returns an
integer between 0 and 7 inclusive specifying the
current Layer 2 802.1Q audio priority value. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.1.1.29 |
| endptMCIPADD List of call server addresses. This
variable returns a sequence of IP addresses, in
dotted-decimal orDNS format and separated by
commas, of call server IP addresses available… | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.6889.2.69.1.1.3 |
| endptL2QSIG Signaling priority. This variable returns
an integer between 0 and 7 inclusive specifying the
current Layer 2 802.1Q signaling priority value. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.1.1.30 |
| endptL2QVLAN Telephone VLAN Identifier. This variable returns
an integer between 0 and 4094 inclusive specifying the
current Layer 2 802.1Q VLAN Identifier value. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.1.1.31 |
| endpt46XXUPGR Upgrade script ID. This variable returns
a string of up to 16 ASCII characters specifying
the name of the upgrade script retrieved by TFTP
after the most recent power-up or rese… | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.6889.2.69.1.1.32 |
| endptDNSSRVR List of DNS server addresses. This variable
returns a sequence of IP addresses, in dotted-decimal
format and separated by commas, of DNS servers
available for use. | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.6889.2.69.1.1.33 |
| endptDNSINUSE obsolete DNS server address. This variable returns a
4-octet string specifying the IP address of the DNS
server currently in use. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.6889.2.69.1.1.34 |
| endptDOMAIN List of DNS domain labels. This variable
returns a sequence of labels, separated by periods, for
use as the highest-level domain in resolving DNS names
in system values. | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.6889.2.69.1.1.35 |
| endptRTCPMON RTCP Monitor address. This variable returns a
4-octet string specifying the IP address of the RTCP
monitor currently in use. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.6889.2.69.1.1.36 |
| endptPHY2STAT Secondary Ethernet interface setting. This
variable returns 0 if the endpoint's secondary Ethernet
interface is currently NOT enabled (or none exists), 1
if the hub is setfor… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.1.1.37 |
| endptIRSTAT IR Interface flag. This variable returns 0
if the endpoint's IR interface is currently NOT enabled,
else 1. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.1.1.38 |
| endptSMTPSRVR SMTP server IP addresses. This variable
returns a comma-separated list of SMTP server IP
addresses available for use, in dotted-decimal
or DNS format. | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.6889.2.69.1.1.39 |
| endptMCIPINUSE Call server address. This variable
returns a 4-octet string specifying the IP
address of the call server currently in use. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.6889.2.69.1.1.4 |
| endptDSPVERSION DSP Version. This variable returns a string
of up to 10 characters, that identifies the version of
the DSP firmware in the endpoint. | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.6889.2.69.1.1.40 |
| endptLOGSRVR Event Log server address. This variable
returns at most one IP address, in dotted-decimal
or DNS format, of the server to be used for event
logging. This function is intended… | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.6889.2.69.1.1.41 |
| endptLOGSTAT obsolete Event Log flag. This variable returns 0 if
the endpoint's event logging capability is currently
NOT enabled, else 1. This function is intended for
Avaya use, in debugging if… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.1.1.42 |
| endptAGCHAND Handset AGC status. This variable returns 1
if the endpoint's handset Automatic Gain Control
capability is currently enabled, else 0. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.1.1.43 |
| endptAGCHEAD Headset AGC status. This variable returns 1
if the endpoint's headset Automatic Gain Control
capability is currently enabled, else 0. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.1.1.44 |
| endptPHY1STAT Ethernet line interface status. This
variable returns 0 if the endpoint's Ethernet line
interface is currently NOT enabled, 1 if the Ethernet
line interface is currently for a… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.1.1.45 |
| endptL2QSTAT 802.1Q tagging flag. This variable returns 0
if the Layer 2 802.1Q tagging parameter is currently
OFF, else 1. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.1.1.46 |
| endptVLANTEST obsolete VLAN pause parameter. This variable returns
the number of seconds for the endpoint to wait for a
DHCPOFFER message when using a non-zero VLAN ID. Valid
values are integers… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.1.1.47 |
| endptPHONECC Phone comcode. This variable returns a string
of up to 9 numerical characters, specifying the comcode
of the endpoint itself. | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.6889.2.69.1.1.48 |
| endptVLANLIST VLAN ID list. This variable returns a list of
zero or more VLAN IDs. | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.6889.2.69.1.1.49 |
| endptMCPORT Transport layer port number. This
variable returns an integer specifying the
port number in use by the current call server. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.1.1.5 |
| endptAGCSPKR Speakerphone AGC status. This variable returns
1 if the endpoint's speakerphone Automatic Gain Control
capability is currently enabled, else 0. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.1.1.50 |
| endptHTTPSRVR HTTP server IP addresses. This variable
returns a comma-separated list of HTTP server IP
addresses available for use, in dotted-decimal or
DNS format. | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.6889.2.69.1.1.51 |
| endptHTTPDIR HTTP server Directory. This variable returns
the path used in formation of the URI for HTTP GET
operations. | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.6889.2.69.1.1.52 |
| endptHTTPPORT HTTP TCP port number. This variable returns
the TCP port number used by HTTP during initialization. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.1.1.53 |
| endptHTTPUSED HTTP initialization server IP address. This
variable returns a 4-octet IP address for the HTTP server
used during initialization (all zeroes if no server
successfully used dur… | scalar | OctetString | .1.3.6.1.4.1.6889.2.69.1.1.54 |
| endptPROCSTAT Local Procedure flag. This variable returns 0 if
Local Procedures are currently allowed for this telephone,
else 1. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.1.1.55 |
| endptSIG Signaling protocol download flag. This variable
returns the integer corresponding to the current
signaling protocol. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.1.1.57 |
| endptGROUP Group identifier. This variable returns the
integer corresponding to the current group identifier. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.1.1.58 |
| endptSNMPADD SNMP source addresses. This variable returns
one or more allowable source IP addresses for SNMP queries,
in dotted decimal or DNS format. | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.6889.2.69.1.1.59 |
| endptPHONESN Housing serial number. This variable
returns a string of up to 18 ASCII characters,
specifying the serial number on the outside
of the endpoint's housing. | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.6889.2.69.1.1.6 |
| endptCODESRVR obsolete HTTP server addresses. This variable returns
zero or more HTTP server addresses for software download,
in dotted decimal or DNS format. | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.6889.2.69.1.1.60 |
| endptCODEUSED obsolete HTTP server address used. This variable
returns the HTTP server address from CODESRVR used,
if any, during initialization, or all zeroes if no HTTP
server was used. | scalar | OctetString | .1.3.6.1.4.1.6889.2.69.1.1.61 |
| endptSTATIC Static programming override flag. This variable
returns the integer corresponding to the current level of
override permissions for static programming. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.1.1.62 |
| endptTLSSRVR TLS server addresses. This variable returns zero
or more Transport Layer Security server addresses for
software download, in dotted decimal or DNS format. | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.6889.2.69.1.1.63 |
| endptTLSUSED TLS server address used. This variable returns the
TLS server address from TLSSRVR used, if any, during
initialization, or all zeroes if no TLS server was used. | scalar | OctetString | .1.3.6.1.4.1.6889.2.69.1.1.64 |
| endptCNAPORT Chatter server port. This variable returns the
Chatter server registration transport-layer port number
(from 0 to 65535; default is 8888). | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.1.1.65 |
| endptCNASRVR CNA server addresses. This variable returns zero
or more Chatter server addresses for network analysis, in
dotted decimal or DNS format. | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.6889.2.69.1.1.66 |
| endptDSTOFFSET Daylight Savings Time Offset. This variable
returns the offset in local time for Daylight Savings Time.
Currently used in SIP phones. | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.6889.2.69.1.1.67 |
| endptDSTSTART Daylight Savings Time Start. This variable returns
the first day or date Daylight Savings Time is effective.
Currently used in SIP phones. | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.6889.2.69.1.1.68 |
| endptDSTSTOP Daylight Savings Time Stop. This variable returns
the first day or date after Daylight Savings Time is over.
Currently used in SIP phones. | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.6889.2.69.1.1.69 |
| endptPWBCC PWB comcode. This variable returns
a string of up to 9 numerical characters,
specifying the comcode or version number of
the printed wiring board of the endpoint. | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.6889.2.69.1.1.7 |
| endptGMTOFFSET Greenwich Mean Time Offset. This variable returns
the offset in local time for Greenwich Mean Time. Currently
used in SIP phones. | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.6889.2.69.1.1.70 |
| endptSNTPSRVR SNTP server addresses. This variable returns zero
or more SNTP server addresses for obtaining time data, in
dotted decimal or DNS format. Currently used in SIP phones. | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.6889.2.69.1.1.71 |
| endptBAKLIGHTOFF Backlight idle timer setting. This variable returns
the number of minutes of idle time, after which the
telephone backlightis turned off. Range is 0-999, with a
default of 120.… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.1.1.72 |
| endptDOT1X Current value for 802.1X handling. This variable returns
0 if the telephone supports unicast Supplicant operation only,
with PAE multicast pass-through without proxy Logof… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.1.1.73 |
| endptAUDIOENV Audio environment selection index. This variable returns
the current setting from the audio environment table (from 0 to 107,
default is 0). | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.1.1.74 |
| endptAUDIOSTHD Audio headset sidetone setting. This variable returns the
current setting (0, 1, or 2; default is 0). | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.1.1.75 |
| endptAUDIOSTHS Audio handset sidetone setting. This variable returns the
current setting (0, 1, or 2; default is 0). | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.1.1.76 |
| endptDHCPINUSE DHCP server address. This variable returns a 4-octet string
specifying the IP address of the DHCP server from which the
telephone's IP address was obtained (or all zeroes if the… | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.6889.2.69.1.1.77 |
| endptDHCPLEASEEXP Remaining time of IPADD lease. This
variable returns an unsigned integer specifying
the length of time in seconds until the expiration of the IP
address lease, or 0 if the lease… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.1.1.78 |
| endptDHCPSTD DHCP lease violation flag. This variable returns
1 if the telephone is not allowed to use the IP address after
its lease has expired, or else 0 if the telephone is allowed to
co… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.1.1.79 |
| endptPWBSN PWB serial number. This variable
returns a string of up to 18 ASCII characters,
specifying the serial number on the endpoint's
printed wiring board, or N/A if the board has
… | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.6889.2.69.1.1.8 |
| endptDHCPT1REM Remaining time until IP address lease renewal. This
variable returns an unsigned integer specifying the length of
time in seconds until the start of the IP
address lease renewal… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.1.1.80 |
| endptDHCPT2REM Remaining time until IP address lease renewal. This
variable returns an unsigned integer specifying the length of
time in seconds until the start of the IP address lease
rebind… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.1.1.81 |
| endptICMPRED ICMP Redirect support setting. This variable returns 1 if the telephone
supports received Redirect messages as specified in RFC 1122, Sections
3.2.2.2 and 3.3.1.2, or 0 if the t… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.69.1.1.82 |
| endptSSONCONTENT Contents of DHCP Site Specific Option Number. This variable returns
the data portion of the DHCP SSON as designated by endptNVSSON. | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.6889.2.69.1.1.83 |
| endptBRURI Backup and restore URI. This variable returns
a string specifying the URI used for backup and restore files. | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.6889.2.69.1.1.84 |
| endptETHERADD MAC address. This variable returns
a 6-octet string specifying the endpoint's
MAC address. | scalar | OctetString | .1.3.6.1.4.1.6889.2.69.1.1.9 |